Best sellers

Protective sheath for white cable - white silica wire

Protective sheath for electrical cables

Protective sheath for white cable - silica wire and silicone coating - diameter...

€0.70

It is important to choose the internal diameter of the duct that best suits your needs from the various options available. One unit is equivalent to 1 linear metre.

50mm diameter frosted globe glass for D11 base and G4 lamp

Out-of-Stock

Glassware, stoneware, designer lighting

30mm diameter frosted globe glass for D11 base and G4 lamp

Verrerie-globe-depoli-30mm-D11

€7.20

30 mm diameter frosted globe glass for G4 lamp on D11 lampholder.

View

Brass ring - nut diameter 20.5mm thickness 6mm

Nut and washer

Brass ring - nut diameter 20.5mm for threaded tube M10 height 6mm

DIY093-202012

€1.50

Brass bushes are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

Sockets, multipliers, risers, adapter sockets

Adaptor lampholder - E40 to E27 Long

EF-E40-E27L

€3.95

Convert your E40 lampholder to an E27 base in an instant with this adapter socket

Electrical cables, connectors and tools

Brass crimping sleeve for load-bearing steel cable - one loop stop sleeve

Manchon-laiton

€0.20

Form a loop at one end of the electrical cable with its supporting steel cable.

M4 zinc-plated steel screw without hollow hexagonal head - thread length according to variation

Cable clamp, cable fastener, screws, interlock button

M4 zinc-plated steel screws without hollow hexagonal head - sold in packs of 10 -...

vis-acier-m4-HC

€0.60

M4 galvanised steel screws for luminaire assembly

G4 LED bulbs

LED Globe crystal bulb with G4 base, 1.5 watt output, 230 volts

Globe-cristal-LED-G4

€7.20

This G4 LED bulb will provide an original light made up of shadows and highlights for beautiful atmospheric lighting.

brass threaded ring for tube M6 diameter 16mm

Nut and washer

Threaded ring M6 1mm pitch in brass diameter 16mm height 10mm

DIY092-205020-M6

€1.95

Brass bushes are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

304 L stainless steel cable with transparent PVC sheath for LED panels, length 1m

Chain, cable, rope, ball and pendant

Stainless steel cable 304 L Ø 1.5mm PVC sheathed transparent length according to variation

cable-acier-Ø1.5mm

€0.90

PVC-coated stainless steel cable for hanging LED panels

Lighting and lighting design

Brass end caps for ball link chain - choice of diameters

fermoir-chaine-laiton

€0.18

These brass clasps can be used to link two chains together or to create an initial hanging point.

Nut and washer

Low zinc-plated nut for M20 tube, 1.5 mm pitch, 3 mm thick

écrou-zinc-M20-pas1.5mm

€1.20

Low zinc-plated steel nuts are perfect for assembling light fittings and chandeliers mounted on M20 hollow rods.

Brass hexagon nut for M10 threaded tube, 1mm pitch

Tube and threaded accessory

Brass hexagon nut for M8 threaded tube, 1.25 mm pitch

Ecrou-laiton-M8-1.25

€0.40

The low brass nuts are perfect for assembling light fittings and chandeliers mounted on M8x1.25 hollow rods.

High Power LED GU10 Dimmable Spectra Color 427 Lumens 7 w → 60 watts

GU10 LED bulbs

Dimmable GU10 LED bulb 7 w → 60 watts high power LED Spectra Color 427 Lumens

EFSC-7WHP-GU10

€0.00

A new range of high power dimmable bulbs equipped with 7 Epistar chip LEDs, the latest generation technology offering a high colour rendering index.

Lamp and luminaire support

Brass bracket for wall-mounting a luminaire - E14 lampholder

Equerre-laiton-E14

€11.50

Brass bracket for wall mounting a luminaire or E14 lampholder

Round electric cable

Round textile cable with Teflon and PVC sheath 2x0.75mm² - Antique brass braid colour

cable-rond-L-vieilli-2x0.75mm

€4.80

PTFE and PVC sheathed round textile cable with two 0.75mm² conductors - length in metre variations

LED Strip accessories

Female jack plug with cable - 2.1 mm jack connection on bare wire

EFACSTP016

€1.50

Fit your equipment with a cable jack for a single-colour strip connection.

Ecodelie LED strips

Ecodelie LED strip light, 110 volts, 18 watts, 1 metre long

Ecodelie-110v-100cm-1000

€10.00

This LED strip light is not intended for the French market, as its specific 110-volt voltage makes it suitable for other countries.

M4 threaded decorative brass ball cap nut

Brass and bronze creation for luminaire

M4 decorative brass ball cap nut - hexagon socket

DIY095-204016-M4

€3.80

Decorative ball-shaped brass cap nut with hexagonal hexagon used for the construction of brass chandeliers or light fittings.

Threaded insert for M8 tube, 1.25 mm pitch

Tube and threaded accessory

Threaded insert in dichromated steel for M8 tube with 1.25 mm pitch

Insert fileté-M8-1.25

€0.40

Self-tapping sockets ideal for assembling light fittings and chandeliers mounted on M8 hollow rods.

G4 LED bulbs

Flower 9 LED SMD 5730 G4 base bulb

EFG418-flower-9leds

€3.95

Type 5730 9 LED SMD bulb - G4 base available in 3 colours. Operating range from 8 to 30 volts, ideal for use in the home or on motorhomes and boats.

Spherical bulb G45 B22 base violet colour 230 volts

Spherical LED bulbs

G45 spherical LED bulb with B22 base violet light colour 230 volts 1 Watt

G45-b22-230v-violet

€2.90

For enchanting Christmas illumination, 100% decorative coloured light distribution with very low power consumption, just 1 watt.

Socket with E12 base in smooth black plastic for bulb

Lampholder and base

Socket with E12 base in smooth black plastic for lamps fitted with a socket cover

Douille-lisse-E12-noir

€1.96

E12 lampholder in smooth black self-extinguishing plastic for incandescent, halogen or low-energy lamps,

Cable clamp, cable fastener, screws, interlock button

M10 chrome-plated steel electrical cable feed-through terminal on suspended cable

Borne-cable-suspendu-M10

€0.70

Chrome-plated steel bollard for passing electrical wires through suspended cables.

Ecodelie LED strips

Ecodelie 230 volt 20 watt LED strip light 1200mm long

Ecodelie-230v-20W-1200

€14.90

Simple lighting thanks to its 230 volt connection, with miniaturised electronic circuits built directly into the aluminium LED plate.

Threaded tube M10 length from 51cm to 60cm an accessory for bulb sockets

Tube and threaded accessory

M10 threaded tube in galvanised steel length from 51cm to 60cm an accessory for luminaire

DIY-063

€4.86

Hollow threaded rod sold individually in M10 standard with 1mm fine pitch for fixing bulb sockets.Choose the length you need from our range of models, available in this advert in lengths from 51 cm to 60 cm.

Sockets, multipliers, risers, adapter sockets

G4 brass M10 lamp holder with ball head - Thread length depending on declination.

support G4 tête boule 202006

€3.20

This small brass lamp holder makes it easy to install small light sources in G4 format.

Out-of-Stock

Glassware, stoneware, designer lighting

40mm diameter frosted globe glass for D11 base and G4 lamp

Verrerie-globe-depoli-40mm-D11

€8.00

40 mm diameter frosted globe glass for G4 lamp on D11 lampholder.

View

Spherical LED bulbs

E14 flame bulb red light colour 230 volts 1Watt

deco-rouge-flamme-E14

€3.14

For enchanting Christmas illumination, 100% decorative coloured light distribution with very low power consumption, just 1 watt.

Round electric cable

Round electrical cable with four 4x0.3mm² conductors on transparent PVC sheath and...

cable-4x-0.3mm

€3.80

Transparent four-core electrical cable with 0.3mm² wires - length in one-metre variations

Cable clamp, cable fastener, screws, interlock button

M6 transparent plastic screw, headless, length 6mm sold in packs of 10, 100 or 1000 pieces

vis-trans-M6-6mm

€0.62

Headless plastic screws for socket glands.

LED power supply mini cube transformer 6 watts 12 Volts

Out-of-Stock

Standard LED transformer

LED power supply mini cube transformer 6 watts 12 Volts

transfo-cube-12v-6watts

€9.95

A mini transformer with a stabilised output voltage of 12 volts and a power of 6 watts for LED-based products.

View

Brass and bronze creation for luminaire

Tytia electric cable clamp in brass - silicone cable lock - M10 thread, 1mm pitch

DIY188-SC-Tytia

€2.95

Tytia brass electrical cable clamp for lamp socket or ceiling rose cable clamp with silicone cone

Tube and threaded accessory

Threaded brass tube with spout pitch - length 15mm

DIY177-becs-15mm

€0.89

This threaded brass tube is reserved for restoring old light fittings.

Self-locking adjustment block for suspension cable or electrical cable - diameter 1.6 to 2.7mm

Chain, cable, rope, ball and pendant

Self-locking adjustment block for suspension or electric cable - cable diameter 1.6 to...

Bloc auto1.6-2.7

€2.40

Self-locking cable holder, very useful for hanging small lights.

Stainless steel leaf spring on M10 shank, length 50mm

Ring, hook, ball joint and spring

Stainless steel leaf spring with two arms on M10 rod - length 50mm

Ressort-lame-50mm

€1.20

Leaf spring on M10 rod, total length 50 mm, for recessed luminaires.

Rosette, bell, claw and socket cover

Brass lampholder cover with curved base for E27 lamp

Cache-douille-laiton-E27

€6.40

Brass lampholder cover for E27 base luminaire

E10 LED bulbs

E10 base LED bulb for 12 volt DC control cabinet - 1 watt

A-4LED E10-12v

€4.90

This 12-volt bulb is designed for use in electrical cabinets or motor vehicles.

Tools and assembly accessories

G9 socket nut spanner for screwing or unscrewing G9 lighting nuts

clé-G9-P

€7.01

G9 socket nut spanner for screwing or unscrewing G9 lighting nuts

Rectangular 3 watt COB LED Chip On Board board

DIY LED Integration

Barette LED Chip On Board LED rectangular 3 watts COB - 12 volts - 50 x 7 mm

platine-LED-50x7mm-3w

€3.80

A 3 Watt rectangular Multi Chip on board LED with an emissive surface LED source measuring 28 mm by 6 mm, emitting a luminous flux of 300 lumens.

Socket, socket cover, spool, dummy plug, cable clamp

Bobèche - Brass cup for chandelier, lamp or candlestick diameter 31mm threaded M10

DIY099224055

€3.00

Brass cup for chandelier, lamp or candlestick diameter 31mm thread M10

30mm diameter flanged washer for M10 threaded luminaire - colours in 8 variations

Tools and assembly accessories

25mm diameter flanged washer for M10 threaded luminaire - colours in 8 variations

Rondelle-rebord-Ø25

€1.43

Washers with 27mm diameter rim. Choose the colour you need from the range.

Sockets, multipliers, risers, adapter sockets

Compact holder for 78mm R7s bulb

culot-R7S-78

€3.50

Porcelain bases in compact version for R7S 78 mm bulbStandard R7S lampholder for halogen pencils or LED bulbs.Very robust design, made of ceramic.

Electrical socket and switch

Chrome-plated steel lever switch On / Off switch - cable connection

inter-cable-on-off-chrome

€7.80

Lamp power switch with lever knob

Straight bridge in galvanised steel with M10 thread, height 13mm

Tube and threaded accessory

Straight galvanised steel trigger guard M10 threaded at 1mm pitch - trigger guard...

pontet-1-droit-M10-h13

€0.60

M10 threaded bridge in galvanised steel for porcelain lamp bases

Heraclite E27 lampholder with brass rotary knob

Lampholder and base

E27 Heraclite lampholder with solid brass rotary knob for Edison double-ring style lamp

DIY111233054-E27-Héraclite

€16.50

Heraclite E27 brass lampholder for a resolutely neo-retro style, ideal for Edison-style incandescent or LED filament lamps,

Tube and threaded accessory

21.5mm diameter M10 threaded brass luminaire tip, hat shape

DIY094212063

€2.40

A decorative element for assembling M10 brass luminaires and chandeliers.

Brass ring - nut diameter 40mm thickness 8mm

Nut and washer

Brass ring-nut diameter 40mm for threaded tube M10 height 8mm

DIY093-202015

€6.52

Brass bushes are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

Flat electric cable

3-conductor flat cable for Dimma color LED strip

cable-dimmacolor

€1.20

Flat electrical cable with three conductors, one red, one green and one white with 0.3mm² wires, length 1m

Showing 529-576 of 2280 item(s)