Lighting and lighting design

All the materials you need to create a new light fitting or restore an old chandelier. Sockets, screws, lamps, horns, etc.

Whether for private individuals or professionals, this category of products will enable you to embellish your home with made-to-measure lighting.

Chain, cable, rope, ball and pendant

Dummy candle

Brass and bronze creation for luminaire

Lampholder and base

Tube and threaded accessory

Glassware, stoneware, designer lighting

LED filament bulb

Adapter sleeve

Electrical socket and switch

Rosette, bell, claw and socket cover

Electrical cable, Protective sheath

Lamp and luminaire support

Nut and washer

Cable clamp, cable fastener, screws, interlock button

Ring, hook, ball joint and spring

The antique dealers' corner

Cable clamp, cable fastener, screws, interlock button

M10 cylindrical brass cable clamp, diameter 15mm, with M4 locking screw

DIY214007-15

€2.60

Cylindrical brass electrical cable clamp for light bulb socket or ceiling rose with M10 thread.

Cable clamp, cable fastener, screws, interlock button

M10 knurled brass electric cable clamp with M6 locking screw

DIY-211011-serre-cable-bm6

€2.70

Knurled brass electrical cable clamp for light bulb socket or ceiling rose with M10 thread.

Cable clamp, cable fastener, screws, interlock button

M10 knurled brass electric cable clamp with M4 locking screw

DIY-211012-Bm4

€2.70

Knurled brass electrical cable clamp for light bulb socket or ceiling rose with M10 thread.

Conical brass cable clamp with M10 thread.

Cable clamp, cable fastener, screws, interlock button

M10 tapered brass electric cable clamp with M4 locking screw

DIY095203003-SC-conique-bm4

€2.60

Conical brass electrical cable clamp for light bulb socket or ceiling rose with M10 thread.

Electric cable clamp, brass, M10 thread.

Brass and bronze creation for luminaire

Brass electrical cable clamp with M10 threaded cable gland

serre-cable-laiton-presse-M10

€2.60

Brass electrical cable clamp for light bulb socket or ceiling rose with M10 thread.

Brass and bronze creation for luminaire

Brass washer with M10 hole flange for light fittings - diameter 15 to 50mm

DIY086-laiton-bord

€1.48

Brass washer with flange used for the construction of brass chandeliers or light fittings.

Single-core electrical cable with Teflon sheath

Electrical cable with Teflon sheath, conductor cross-section 0.3mm², choice of colours

cable-teflon-1C-0.3

€0.65

PTFE Teflon electric cable with 0.3mm² wires - length in 1 metre increments

G4 bakelite with self-grip connection on bare wire

Sockets, multipliers, risers, adapter sockets

Mini G4 bakelite cap with Autogrip connection on bare wire

culot-G4-bakelite-autogrip

€0.75

A mini G4 bakelite base on a bare wire for G4 halogen or G4 LED bulbs.

0.5mm² coaxial electric cable on transparent Teflon, 1m long

Round electric cable

Coaxial electrical cable on transparent Teflon with two 0.5mm² conductors

cable-coax-0.5mm²

€3.10

Two-core coaxial electrical cable with 0.5 mm² wires - length in 1 metre increments

0.3mm² coaxial electric cable on transparent Teflon, 1m long

Round electric cable

Coaxial electrical cable on transparent Teflon with two 0.3mm² conductors

cable-coax-0.3mm²

€2.59

Two-core coaxial electrical cable with 0.3 mm² wires - length in 1 metre increments

G4 lamp holder for bulkhead feed-through

Out-of-Stock

Sockets, multipliers, risers, adapter sockets

G4 lamp holder on bulkhead sold without G4 base

support-G4-sans-culot

€3.00

This small G4 lamp holder makes it easy to install small light sources simply by going through a partition, on shelves or on kitchen units to light a work surface.

View

304 L stainless steel cable with transparent PVC sheath for LED panels, length 1m

Chain, cable, rope, ball and pendant

Stainless steel cable 304 L Ø 1.5mm PVC sheathed transparent length according to variation

cable-acier-Ø1.5mm

€0.90

PVC-coated stainless steel cable for hanging LED panels

Tube and threaded accessory

Threaded brass sleeve for installation of 30 mm high M10 threaded tubes

DIY105219011

€4.90

A decorative brass element for assembling the luminaires, allowing cables to pass through on M10 hollow rods.

Smooth brass sleeve for M10 threaded pipes, length 20mm

Out-of-Stock

Tube and threaded accessory

Threaded brass sleeve for installation of 20 mm high M10 threaded tubes

Manchon-laiton-fileté-20mm

€4.90

A decorative brass element for assembling the luminaires, allowing cables to pass through on M10 hollow rods.

View

Tube and threaded accessory

Smooth brass sleeve for M10 threaded tubes, length 31mm

Manchon-laiton-lisse-31mm

€8.60

A decorative brass element for assembling the luminaires, allowing cables to pass through on M10 hollow rods.

M10 chrome-plated steel cable feed-through terminal for suspension cable feed-through

Chain, cable, rope, ball and pendant

M10 threaded chrome-plated steel terminal for suspension cable mounting

Borne-cable-suspendu-M10

€0.70

Chrome-plated steel terminal for suspension cable.

Cable clamp, cable fastener, screws, interlock button

M10 chrome-plated steel electrical cable feed-through terminal on suspended cable

Borne-cable-suspendu-M10

€0.70

Chrome-plated steel bollard for passing electrical wires through suspended cables.

Electrical cable terminal on tensioned cable

Cable clamp, cable fastener, screws, interlock button

Chrome-plated steel electrical cable bollard on tensioned cable

Borne-cable-tendu

€0.70

Chrome-plated steel bollard for passing electrical wires over tensioned cable.

Brass reducer for electric threaded tube

Tube and threaded accessory

Reducer for brass electrical threaded tube size according to variant

Réduction-laiton

€1.49

Reducer for electrical brass tube, internal/external thread - choice of dimensions

Brass ring nut for threaded tube M10 diameter 13mm

Nut and washer

Brass ring - nut diameter 13mm for M10 threaded tube

DIY101215002-laiton-M10-13mm

€0.80

Brass bushes are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

Hexagonal brass sleeve with M10 side hole thread

Tube and threaded accessory

Hexagonal threaded brass socket for M10 electrical tube with side hole

DIY091225017-M10-laiton-perçage

€6.60

This hexagonal brass sleeve is perfect for assembling M10 hollow rods.

Tube and threaded accessory

Threaded brass hexagonal socket for M10 electrical tube with side opening

DIY091-225022

€6.60

This hexagonal brass sleeve is perfect for assembling M10 hollow rods.

Porcelain bases for G9 lamps on M20.8MM sockets

Sockets, multipliers, risers, adapter sockets

G9 porcelain lamp base for claw support

culot-G9-sur-douille

€1.10

G9 porcelain lampholder for steel base with retaining claws.

Sockets, multipliers, risers, adapter sockets

GH20 lamp socket for G4 or G9 lamp with M10 thread

Douille-GH20

€2.16

This small metal holder can be used to insert G4 or G9 porcelain lampholders.

Mini G4 bakelite base for LED or halogen bulbs

Sockets, multipliers, risers, adapter sockets

Mini G4 bakelite base for LED or halogen lamps

Mini culot-G4-bakelite

€0.50

A mini G4 bakelite base on a bare wire for G4 halogen or G4 LED bulbs.

G4 LED bulbs

ISA G4 base LED bulb with four 2835 LEDs - 2 watts - 12 volts

EFG4-ISA-12

€3.95

The G4 lamp format means this bulb can be easily integrated into any luminaire,

M12 threaded tube with 1mm pitch - 100cm long

Tube and threaded accessory

Threaded tube in galvanised steel M12 with 1.5mm pitch - length 100cm

DIY-085-M12x1.5-100cm

€14.90

Hollow threaded rod sold individually in M12 standard with 1mm fine pitch, 1 metre long.

Classic Théme E27 lampholder in machined solid brass for Edison-style lamp in a choice of 3 colours

Lampholder and base

Classic Théme E27 lampholder machined from solid for loft style Edison 3 colours to...

Douille-E27-Classic-Théme

€32.90

E27 Classic Theme lampholder for a resolutely neo-retro style, ideal for Edison-style incandescent or LED filament lamps.

Flat electric cable

3-conductor flat cable for Dimma color LED strip

cable-dimmacolor

€1.20

Flat electrical cable with three conductors, one red, one green and one white with 0.3mm² wires, length 1m

M10 thread brass electrical cable clamp.

Cable clamp, cable fastener, screws, interlock button

Conical brass electrical cable clamp with cable gland - M10 thread

DIY203002-serre-cable-laiton-con

€2.80

Conical brass electrical cable clamp for light bulb socket or ceiling rose with M10 thread.

Smooth brass bushing 23mm for M10 threaded pipes

Tube and threaded accessory

M10 brass olive sleeve nut for fitting M10 threaded tubes, length 15mm

DIY093-205068

€1.30

A decorative brass element for assembling the luminaires, allowing cables to be installed on M10 hollow rods.

Tube and threaded accessory

Smooth brass sleeve for M10 threaded pipes, length 23mm

Manchon-C01190040-23MM

€5.90

A decorative brass element for assembling the luminaires, allowing cables to pass through on M10 hollow rods.

30mm diameter brass ball with M10 thread

Column, tube, ball, luminaire tip, suspension ring

30mm diameter brass ball with 1mm pitch M10 non-through thread

DIY103229039-M10-Ø30mm

€11.00

Solid brass ball with M10 thread for assembling hollow polishing rods

Brass ball 25mm diameter with M10 thread

Tube and threaded accessory

Brass ball, diameter 25mm, M10 threaded, 1mm pitch, non-through hole

DIY103229026-M10-Ø25mm

€7.90

Solid brass ball with M10 thread for assembling hollow polishing rods

20mm diameter brass ball with M10 thread

Tube and threaded accessory

Brass ball, diameter 20mm, M10 threaded, 1mm pitch, non-through hole

DIY103229019-M10-Ø20mm

€4.90

Solid brass ball with M10 thread for assembling hollow polishing rods

Ring, hook, ball joint and spring

Two-arm spring clamp on M10 rod, size depending on declination

Ressort-deux

€0.85

100mm to 120mm diameter spring for all recessed luminaires.

Showing 1081-1116 of 1401 item(s)