Nut and washer

A range of accessories for assembling luminaires and lighting fittings: flat washers, flanged washers, nuts, rings, tubes, etc.

Out-of-Stock

Screw, nut, threaded tube and plug, sleeve, washer, reducer

copy of Tenuous brass bell - diameter 118mm pre-drilled diameter 5mm

Rondelle- Chloé

€41.30

Tenuous brass horn for antique luminaire

View

Out-of-Stock

Screw, nut, threaded tube and plug, sleeve, washer, reducer

copy of Tenuous brass bell - diameter 118mm pre-drilled diameter 5mm

Rondelle-Nivia

€41.30

Tenuous brass horn for antique luminaire

View

Out-of-Stock

Screw, nut, threaded tube and plug, sleeve, washer, reducer

copy of Tenuous brass bell - diameter 118mm pre-drilled diameter 5mm

Rondelle-Flavia

€51.60

Tenuous brass horn for antique luminaire

View

brass threaded ring for M10 15mm diameter tube

Nut and washer

copy of M10 brass threaded ring, diameter 15mm, height 20mm

DIY092-205026-M10

€2.20

Brass bushes are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

Brass hexagon nut for M10 threaded tube, 1mm pitch

Tube and threaded accessory

6-sided brass nut for M10 threaded tube, 1mm pitch, 2 mm thick

Ecrou-laiton-M10-e2mm

€0.40

Low brass nuts are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

Tube and threaded accessory

Wide zamac serrated nut for M20.8mm threaded ring with 2mm pitch

écrou-bague-large-M20,8

€1.50

Zamac locknuts for assembling luminaires and lighting fixtures mounted on G9 or G4 lampholders.

Lamp and luminaire support

Silicone protection washer for M4 screw, external diameter 9mm

Rondelle-silicone-M4

€0.10

Transparent silicone washers to reduce vibration and absorb shock.

Lamp and luminaire support

Silicone protection washer for M5 screws 10mm external diameter

Rondelle-silicone-M5

€0.12

Transparent silicone washers to reduce vibration and absorb shock.

Nut and washer

Stainless steel washer M10 diameter 30mm thickness 2mm - A2

Rondelle-inox-M10-30

€0.65

Lamp and luminaire support

Silicone protection washer for M8 screws with 16mm external diameter

Rondelle-silicone-M8

€0.15

Transparent silicone washers to reduce vibration and absorb shock.

Lamp and luminaire support

Silicone protection washer for M6 screws, 11mm external diameter

Rondelle-silicone-M6

€0.10

Transparent silicone washers to reduce vibration and absorb shock.

Tube and threaded accessory

Transparent plastic screw with M6 thread and Ø 4mm hole - length 12mm

Vis-plas-trans-M6-Ø4-12mm

€0.15

Transparent plastic screw with M6 thread and 4mm diameter hole - 12mm long, perfect for discreet assembly.

Lamp and luminaire support

Silicone protection washer for M10 screw, external diameter depending on version

Rondelle-silicone

€0.60

Tube and threaded accessory

low transparent plastic nut for M10 tube, 1mm pitch, 4mm thick

écrou-plas-trans-M10-4mm

€0.15

The low, transparent plastic nuts are perfect for discreet assembly.

Cable clamp, cable fastener, screws, interlock button

Porcelain wall-mounted bollard for twisted electrical cable - chestnut brown

Borne-porcelaine-marron

€3.80

Porcelain bollard for decorative wall-mounted electrical cables

Cable clamp, cable fastener, screws, interlock button

Porcelain wall-mounted bollard for twisted electrical cable - chocolate colour

Borne-porcelaine-chocolat

€3.80

Porcelain bollard for decorative wall-mounted electrical cables

Cable clamp, cable fastener, screws, interlock button

Porcelain wall-mounted bollard for passing twisted electrical cables - colour pink

Borne-porcelaine-rosange

€3.80

Porcelain bollard for decorative wall-mounted electrical cables

Cable clamp, cable fastener, screws, interlock button

Porcelain wall-mounted bollard for twisted electrical cable - white

Borne-porcelaine-blanc

€3.80

Porcelain bollard for decorative wall-mounted electrical cables

Cable clamp, cable fastener, screws, interlock button

Porcelain wall bollard for twisted electrical cable - Indian yellow

Borne-porcelaine-jaune

€3.80

Porcelain bollard for decorative wall-mounted electrical cables

Nut and washer

Deep-drawn brass cup washer outer diameter 29mm, 22mm and 15mm

DIY211-Rondelle-cuvette-emb

€0.24

This washer is particularly suitable for assembling old luminaires.

Nut and washer

Brass fan washer for tubes with internal toothed spout thread type JZ

Rondelle-eventail-laiton-bec

€0.30

This fan lock washer is particularly suitable for assembling old luminaires.

Tools and assembly accessories

Adapter ring with retaining lugs for E27 or B22 to E14 lampshades

Anneau-patte- E27-E14

€0.70

These small nylon rings make it easy to fit a large-diameter shade to an E14 lampholder.

Nut and washer

M10 brass fan washer with internal serrations type JZ

Rondelle-eventail-laiton-M10

€0.30

This fan lock washer is particularly suitable for assembling old luminaires.

Nut and washer

M8 brass fan washer with internal serrations type JZ

Rondelle-eventail-laiton-M8

€0.17

This fan lock washer is particularly suitable for assembling old luminaires.

Nut and washer

M6 brass fan washer with internal serrations type JZ

Rondelle-eventail-laiton-M6

€0.13

This fan lock washer is particularly suitable for assembling old luminaires.

Tube and threaded accessory

Brass adaptor M10 male to female spout pitch

adapt-M10/M-PDB/F

€1.95

Small brass adaptor M10 male to female spout pitch

Tube and threaded accessory

Brass adaptor male spout pitch to female M10

adapt-PDB/M-M10/F

€1.95

Small brass adaptor male spout pitch to female M10

Cable clamp, cable fastener, screws, interlock button

Brass wall-mounted bollard with knurled nut for electrical cable entry

Borne-laiton-moleté

€7.50

Brass bollard for decorative wall-mounted electrical cables

Tube and threaded accessory

Zinc-plated steel nut, hexagonal, threaded, 10.85 diameter, 1.33 mm pitch

Ecrou-zing-pas-des-becs

€0.60

These zinc-plated steel nuts, tapped to the spout pitch, are reserved for restoring old luminaires.

Tube and threaded accessory

Brass hexagonal nut for threaded tube with 10.85 mm diameter spouts at 1.33 mm pitch

Ecrou-laiton-pas-des-bec

€0.70

These brass nuts tapped to the spout pitch are reserved for restoring old light fittings.

Brass and bronze creation for luminaire

M4 threaded decorative brass ball cap nut

DIY095-204030

€1.00

Decorative ball-shaped brass cap nut used for the construction of brass chandeliers or light fittings.

Brass and bronze creation for luminaire

M4 decorative brass ball cap nut - hexagon socket

DIY095-204016-M4

€3.80

Decorative ball-shaped brass cap nut with hexagonal hexagon used for the construction of brass chandeliers or light fittings.

M5 threaded decorative brass ball cap nut

Brass and bronze creation for luminaire

M5 decorative brass ball cap nut - hexagon socket

DIY095-204016-M5

€3.80

Decorative ball-shaped brass cap nut with hexagonal hexagon used for the construction of brass chandeliers or light fittings.

Nut and washer

zinc-plated steel nut for M42 threaded tube, 3mm pitch, 21mm thick

écrou-zinc-M42mm

€10.20

Hexagonal nut in galvanised steel for assembling luminaires on M38 threaded hollow tube

Nut and washer

zinc-plated steel nut for M38 threaded tube, 3mm pitch, 19mm thick

écrou-zinc-M38mm

€9.20

Hexagonal nut in galvanised steel for assembling luminaires on M38 threaded hollow tube

Chrome-plated washer with straight edge - internal diameter from 13mm to 44mm

Tools and assembly accessories

Chrome-plated washer with straight edge - inside diameter from 13mm to 44mm - in 8...

Rondelle-chrome-droit

€2.16

Chromium-plated washers with straight edge, choose the diameter you need from the range.

Nut and washer

low zinc-plated nut 3/4 inch thread Gaz 14G for threaded tube nominal diameter 26.4mm

écrou-zinc-3/4-14G

€3.50

Low zinc-plated steel nuts are perfect for assembling light fittings and chandeliers mounted on 3/4" hollow rods.

Brass and bronze creation for luminaire

Decorative cylindrical brass plug with 13mm diameter and M10 thread for lighting fittings

DIY097209022-CD

€1.45

Decorative cylindrical brass stopper used in the construction of brass chandeliers or light fittings.

Low zinc-plated nut for M8 tube, 1mm pitch, 3mm thick

Tube and threaded accessory

Low zinc-plated nut for M6 tube, 1mm pitch, 4.5mm thick

écrou-zinc-M6-4.5mm

€0.15

Low zinc-plated steel nuts are perfect for assembling light fittings and chandeliers mounted on M6 hollow rods.

Zinc-plated steel ring nut diameter M28 2mm pitch

Tube and threaded accessory

Threaded zinc-plated steel ring nut M28mm with 2mm pitch for G9 GU10 base

écrou-acier-M28

€1.80

Zinc-plated steel ring nut diameter M28 2mm pitch

Cable clamp, cable fastener, screws, interlock button

Nylon cable clamp - black - pack of 10

Collier-ST-C

€1.32

Nylon clamp for passing electrical cables

Cable clamp, cable fastener, screws, interlock button

Nylon cable clamp - white - pack of 10

Collier-ST-C

€1.32

Nylon clamp for passing electrical cables

Tube and threaded accessory

1/8 inch zinc-plated nut, 3mm thick DN6

écrou-zinc-1/8

€0.18

Low zinc-plated steel nuts are perfect for assembling light fittings and chandeliers mounted on 1/8" hollow rods.

Brass and bronze creation for luminaire

Brass washer for M14 screw external diameter 28mm thickness 1.5mm

Rondelle-laiton-M14x28

€2.00

Brass washer for M14 screw, 1.5mm thick, used in the construction of chandeliers and luminaires

Brass and bronze creation for luminaire

Brass washer for M12 screw external diameter 24mm thickness 1.5mm

Rondelle-laiton-M12x24

€1.80

Brass washer for M12 screw, 1.5mm thick, used in the construction of chandeliers and lighting fixtures

Brass and bronze creation for luminaire

Brass washer for M8 screw external diameter 24mm thickness 1.5mm

Rondelle-laiton-M8x24

€1.60

Brass washer for M8 screw, thickness 1.5mm, used in the construction of chandeliers or luminaires

M10 M8 brass reducer for electric threaded tube

Tube and threaded accessory

Brass reduction M10 pitch 1mm to M8 pitch 1mm 15mm high

DIY206031-m10-m8-15

€1.80

Reducer for electrical brass tube, internal/external thread - choice of dimensions

Rounded brass washer, diameter 30mm, thickness 5mm

Brass and bronze creation for luminaire

Rounded brass washer with M10 thread for 30mm diameter lighting fittings

DIY101-207101

€3.99

Rounded brass washer, diameter 30mm, thickness 5mm, used for the construction of brass chandeliers or light fittings.

Zinc-plated serrated washer for M4 threaded tube

Nut and washer

M4 fan washer with internal teeth type JZ in galvanised steel

Rondelle dentelée M4

€0.06

This fan lock washer is particularly suitable for assembling luminaires fitted with a socket on a hollow stem.

Tube and threaded accessory

Brass hexagon nut for M8 threaded tube, 1.25 mm pitch

Ecrou-laiton-M8-1.25

€0.40

The low brass nuts are perfect for assembling light fittings and chandeliers mounted on M8x1.25 hollow rods.

Straight bridge in galvanised steel with M10 thread, 20 mm high

Tube and threaded accessory

Straight M10 threaded zinc-plated steel trigger guard with 1mm pitch - trigger guard...

pontet-1-droit-M10-h20

€0.60

M10 threaded bridge in galvanised steel for porcelain lamp bases

Straight bridge in galvanised steel with M10 thread, height 13mm

Tube and threaded accessory

Straight galvanised steel trigger guard M10 threaded at 1mm pitch - trigger guard...

pontet-1-droit-M10-h13

€0.60

M10 threaded bridge in galvanised steel for porcelain lamp bases

Straight bridge in galvanised steel with M12 thread, height 12mm

Tube and threaded accessory

Straight galvanised steel trigger guard M12 threaded at 1mm pitch - trigger guard...

pontet-droit-M12-h12

€0.60

M12 threaded bridge in galvanised steel for porcelain lamp bases

Tube and threaded accessory

Straight galvanised steel trigger guard M10 threaded at 1mm pitch - trigger guard...

pontet-droit-M10-h20

€0.60

M10 threaded bridge in galvanised steel for porcelain lamp bases

Tube and threaded accessory

Straight galvanised steel trigger guard M10 threaded at 1mm pitch - trigger guard...

pontet-droit-M10-h13

€0.40

M10 threaded bridge in galvanised steel for porcelain lamp bases

brass threaded ring for M12 tube 15mm diameter

Nut and washer

M12 brass threaded ring, diameter 15mm, height 20mm

DIY092-205022-M12

€2.20

Brass bushes are perfect for assembling light fittings and chandeliers mounted on M12 hollow rods.

Straight bridge in galvanised steel with M10 thread, height 12mm

Out-of-Stock

Tube and threaded accessory

Straight galvanised steel trigger guard M10 threaded at 1mm pitch - trigger guard...

pontet-droit-M10-h12

€0.60

M10 threaded bridge in galvanised steel for porcelain lamp bases

View

Straight bridge in galvanised steel with M10 thread, height 9mm

Tube and threaded accessory

Straight galvanised steel trigger guard M10 threaded at 1mm pitch - height of trigger...

pontet-droit-M10-h9

€0.60

M10 threaded bridge in galvanised steel for porcelain lamp bases

Curved bridge in galvanised steel with M10 thread, height 10mm

Tube and threaded accessory

M10 threaded bridge with 1mm pitch - bridge height 10mm - internal feet

pontet-courbe-M10-h10

€0.60

M10 threaded bridge in galvanised steel for porcelain lamp bases

M12 threaded curved bridge in galvanised steel for porcelain lamp bases

Out-of-Stock

Tube and threaded accessory

M12 threaded trigger guard in curved galvanised steel with 1mm pitch - height of...

pontet-courbe-M12-h13

€0.60

M12 threaded bridge in galvanised steel for porcelain lamp bases

View

Zinc-plated steel ring nut diameter M28mm

Tube and threaded accessory

Threaded zinc-plated steel ring nut M28mm with 2mm pitch for GU10 base

écrou-acier-M28

€1.20

Zinc-plated steel ring nut diameter M28 2mm pitch

M10 threaded bridge in galvanised steel for G9 porcelain lamp bases

Tube and threaded accessory

M10 threaded trigger guard in curved galvanised steel with 1mm pitch - height of...

pontet-courbe-M10-h13

€0.62

M10 threaded bridge in galvanised steel for porcelain lamp bases

brass ring for threaded tube M10 diameter 14mm

Nut and washer

Ring - brass ring 10.5mm internal diameter - M3 locking screw

DIY151-215044-10

€1.30

Brass bushes are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

brass ring for threaded tube M14 diameter 18mm

Nut and washer

Ring - brass ring 14.3mm internal diameter - M3 locking screw

DIY151-205100-14

€1.50

Brass bushes are perfect for assembling light fittings and chandeliers mounted on M14 hollow rods.

Threaded insert for M4 tube, 0.7 mm pitch

Tube and threaded accessory

Threaded insert in dichromated steel for M4 tube with 0.7 mm pitch

Insert fileté-M4-0.7

€0.35

Self-tapping sockets ideal for assembling light fittings and chandeliers mounted on M4 hollow rods.

Threaded insert for M5 tube, 0.8 mm pitch

Tube and threaded accessory

Threaded insert in dichromated steel for M5 tube with 0.8 mm pitch

Insert fileté-M5-0.8

€0.36

Self-tapping sockets ideal for assembling luminaires and lighting fixtures mounted on M5 hollow rods.

Tube and threaded accessory

Threaded insert in dichromated steel for M6 tube with 1 mm pitch

Insert fileté-M6-1

€0.38

Self-tapping sockets ideal for assembling light fittings and chandeliers mounted on M6 hollow rods.

Threaded insert for M8 tube, 1.25 mm pitch

Tube and threaded accessory

Threaded insert in dichromated steel for M8 tube with 1.25 mm pitch

Insert fileté-M8-1.25

€0.40

Self-tapping sockets ideal for assembling light fittings and chandeliers mounted on M8 hollow rods.

low stainless steel nut for M12 tube with 1mm pitch

Tube and threaded accessory

low stainless steel nut for M12 tube, 1mm pitch, 6mm thick

écrou-inox-M12-6mm

€0.60

The low stainless steel nuts are perfect for assembling light fittings and chandeliers mounted on M12 hollow rods.

low stainless steel nut for M8 tube with 1mm pitch

Tube and threaded accessory

low stainless steel nut for M8 tube, 1mm pitch, 4mm thick

écrou-inox-M8-4mm

€0.42

The low stainless steel nuts are perfect for assembling light fittings and chandeliers mounted on M8 hollow rods.

low stainless steel nut for M10 tube with 1mm pitch

Tube and threaded accessory

low stainless steel nut for M10 tube, 1mm pitch, 6mm thick

écrou-inox-M10-6mm

€0.55

The low stainless steel nuts are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

low zinc-plated nut for M12 tube, 1mm pitch, 5mm thick

Nut and washer

Low zinc-plated nut for M12 tube, 1.5 mm pitch, 5 mm thick

écrou-zinc-M12-pas-1.5m-H5mm

€0.28

Low zinc-plated steel nuts are perfect for assembling light fittings and chandeliers mounted on M12 hollow rods.

brass threaded ring for tube M6 diameter 16mm

Nut and washer

Threaded ring M6 1mm pitch in brass diameter 16mm height 10mm

DIY092-205020-M6

€1.95

Brass bushes are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

Nut and washer

low zinc-plated nut for M12 tube, 1mm pitch, 5mm thick

écrou-zinc-M12-5mm

€0.28

Low zinc-plated steel nuts are perfect for assembling light fittings and chandeliers mounted on M12 hollow rods.

Nut and washer

Low zinc-plated nut for M18 tube, 1.5 mm pitch, 8 mm thick

écrou-zinc-M18-pas1.5mm-ép8mm

€1.20

Low zinc-plated steel nuts are perfect for assembling light fittings and chandeliers mounted on M18 hollow rods with a 1.5 mm pitch.

Nut and washer

Low zinc-plated nut for M20 tube, 1.5 mm pitch, 9 mm thick

écrou-zinc-M20-1.5mm-ep9mm

€1.45

Low zinc-plated steel nuts are perfect for assembling light fittings and chandeliers mounted on M20 hollow rods.

Nut and washer

Low zinc-plated nut for M16 tube, 1.5 mm pitch, 7 mm thick

écrou-zinc-M16-pas1.5mm-ép7mm

€0.75

Low zinc-plated steel nuts are perfect for assembling light fittings and chandeliers mounted on M16 hollow rods with a 1.5 mm pitch.

low zinc-plated nut for Ø32.2- 11 inch thick 12mm extruded tube

Nut and washer

Low zinc-plated nut for 1" inch G11 threaded tube, 12mm thick

écrou-zinc-1pouce

€3.95

Low zinc-plated steel nuts are perfect for assembling light fittings and chandeliers mounted on M20 hollow rods.

Brass hexagon nut for M10 threaded tube, 1.5 mm pitch

Out-of-Stock

Tube and threaded accessory

Brass hexagon nut for M10 threaded tube, 1.5 mm pitch

Ecrou-laiton-M10-1.5mm

€0.70

Brass nuts are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

View

Tube and threaded accessory

Low zinc-plated nut for M10 tube, 1.5 mm pitch, 7 mm thick

écrou-zinc-M10x1.5-7mm

€0.40

Low zinc-plated steel nuts are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

Decorative hemispherical brass dish, diameter 60mm

Brass and bronze creation for luminaire

Decorative hemispherical brass cap diameter 60mm with M10 thread for chandeliers

DIY129-coupelle-M10

€13.50

Decorative cylindrical brass stopper used in the construction of brass chandeliers or light fittings.

Brass and bronze creation for luminaire

Brass knurled nut for M12 threaded tube for lighting fixtures, external diameter 15mm

DIY101215010-M12

€0.75

M12 brass knurled nut, 2mm thick, used in the construction of chandeliers and luminaires

Chain, cable, rope, ball and pendant

Brass cable entry terminal - M12 threaded for suspended cable

DIY100209041

€1.35

Brass bollard for passing electrical wires through a suspended cable.

M10 knurled brass plug, diameter 18mm with Ø 4mm hole

Brass and bronze creation for luminaire

18 mm diameter M10 knurled brass plug with Ø 4 mm hole for light fittings

DIY100209040

€1.10

Decorative brass stopper used in the construction of brass chandeliers or light fittings.

38mm diameter brass stopper with 10.5mm Ø hole

Brass and bronze creation for luminaire

38mm diameter brass plug with 10.5mm Ø hole for chandeliers

DIY100207039

€6.20

Decorative brass stopper used in the construction of brass chandeliers or light fittings.

24mm diameter ringed hemispherical brass stopper

Brass and bronze creation for luminaire

24mm diameter ringed hemispherical brass plug with M10 thread for lighting fittings

DIY097222011

€1.40

Ringed hemispherical brass stopper used for the construction of brass chandeliers or light fittings.

Decorative hemispherical brass stopper diameter 23mm

Brass and bronze creation for luminaire

Decorative hemispherical brass plug with 23mm diameter and M10 thread for chandeliers

DIY097222010

€1.60

Decorative hemispherical brass stopper used in the construction of brass chandeliers or light fittings.

20mm diameter knurled hemispherical brass stopper

Brass and bronze creation for luminaire

Knurled hemispherical brass plug with 20mm diameter and M10 thread for lighting fittings

DIY097222006

€1.20

Knurled hemispherical brass stopper used for the construction of brass chandeliers or luminaires.

Knurled hemispherical brass stopper, diameter 19mm

Brass and bronze creation for luminaire

Knurled hemispherical brass plug with 19mm diameter and M10 thread for lighting fittings

DIY097222003

€1.10

Knurled hemispherical brass stopper used for the construction of brass chandeliers or luminaires.

Decorative hemispherical brass stopper, diameter 28mm

Brass and bronze creation for luminaire

Decorative hemispherical brass plug with 28mm diameter and M10 thread for chandeliers

DIY097222002

€2.05

Decorative hemispherical brass stopper used in the construction of brass chandeliers or light fittings.

Decorative hemispherical brass stopper, diameter 18mm

Brass and bronze creation for luminaire

Decorative 18mm diameter hemispherical brass plug with M10 thread for chandeliers

DIY097222001

€0.90

Decorative cylindrical brass stopper used in the construction of brass chandeliers or light fittings.

Brass and bronze creation for luminaire

18mm diameter decorative cylindrical brass plug with M10 thread for chandeliers

DIY097209021

€1.50

Decorative cylindrical brass stopper used in the construction of brass chandeliers or light fittings.

Brass and bronze creation for luminaire

20mm diameter decorative cylindrical brass plug with M10 thread for chandeliers

DIY097209008

€2.10

Decorative cylindrical brass stopper used in the construction of brass chandeliers or light fittings.

Decorative brass ball cap nut with 6-sided M10 threaded base

Brass and bronze creation for luminaire

15.5mm diameter decorative cylindrical brass plug with M10 thread for chandeliers

DIY097209001

€1.20

Decorative cylindrical brass stopper used in the construction of brass chandeliers or light fittings.

Brass and bronze creation for luminaire

Brass lock washer for M10 threaded tube for lighting fixtures, external diameter 18mm

DIY101215024

€1.80

M10 brass notched washer, 3mm thick, used in the construction of chandeliers and luminaires

Brass ring - nut diameter 9mm for M4 threaded tube

Nut and washer

Brass ring - nut diameter 9mm for threaded tube M4 height 2mm

DIY101215020

€1.52

M4 brass ring nuts are perfect for assembling light fittings and chandeliers mounted on hollow rods.

Nut and washer

Brass ring - nut diameter 9mm for threaded tube M6 height 2mm

DIY101215012

€1.50

M6 brass ring nuts are perfect for assembling light fittings and chandeliers mounted on hollow rods.

Slightly rounded notched brass washer for M10 threaded tube

Brass and bronze creation for luminaire

Slightly rounded notched brass washer for threaded tube M10 external diameter 13mm

DIY101215005

€1.35

M10 brass notched washer, 3mm thick, used in the construction of chandeliers and luminaires

Nut and washer

Brass ring - nut diameter 9mm for threaded tube M5 height 2mm

DIY101215004

€1.32

M5 brass ring nuts are perfect for assembling light fittings and chandeliers mounted on hollow rods.

Brass and bronze creation for luminaire

Notched brass washer for M10 threaded tube for lighting fixtures, external diameter 13mm

DIY101215003-M10

€0.75

M10 brass notched washer, 2mm thick, used in the construction of chandeliers and luminaires

Brass and bronze creation for luminaire

M10 brass stepped washer for 32mm diameter light fittings

DIY101209063

€2.65

brass washers with Ø 11 mm holes for passing electrical cables.

Brass luminaire tip - brass trim reduction M10 to M4

Brass and bronze creation for luminaire

Brass luminaire tip with M10 to M4 trim reduction

DIY094212085

€2.04

Brass trim reducer M10 to M4 tapping

Tube and threaded accessory

Chrome-plated steel trim reduction M10 to M6 with locking screw

Réduction-M10-M6

€1.00

Chrome-plated steel reducer with M10 to M6 thread

Tube and threaded accessory

Chrome-plated steel trim reduction M10 to M8 with locking screw

Réduction-M10-M8

€1.00

Chrome-plated steel reducer with M10 to M8 thread

Zinc-plated serrated washer for M14 threaded tube

Nut and washer

Zinc-plated serrated fan washer for M14 threaded tube

Rondelle dentelée M14

€0.42

This fan lock washer is particularly suitable for assembling luminaires fitted with a socket on a hollow stem.

Knurled decorative brass cap nut with M3 thread, 10mm diameter

Brass and bronze creation for luminaire

M3 knurled decorative brass cap nut with 10mm dia. thread for light fittings

DIY095-210056

€1.00

Decorative brass cap nut with knurling Ø 10mm used for the construction of brass chandeliers or luminaires.

M3 knurled decorative brass cap nut for Ø 10mm

Brass and bronze creation for luminaire

M10 knurled decorative brass cap nut with 15mm dia. thread for light fittings

DIY095-210070

€2.20

Decorative brass cap nut with knurling Ø 10mm used for the construction of brass chandeliers or luminaires.

Decorative brass cap nut with knurled hemispherical head and M5 thread for Ø 10mm

Brass and bronze creation for luminaire

Decorative brass cap nut with knurled hemispherical head M5 Ø 10mm for lighting fittings

DIY095-210004

€1.00

Decorative brass cap nut with knurling Ø 10mm used for the construction of brass chandeliers or luminaires.

M5 knurled head decorative brass cap nut for lighting fittings

Brass and bronze creation for luminaire

M5 Ø 12mm knurled hemispherical head decorative brass cap nut for lighting fittings

DIY095-210036

€1.00

Decorative brass cap nut with knurling Ø 12mm used for the construction of brass chandeliers or luminaires.

Decorative brass cap nut, short knurled head, tapped M5

Brass and bronze creation for luminaire

M5 tapped knurled short head decorative brass cap nut for lighting fittings

DIY095-210015

€1.00

Decorative brass cap nut with knurling Ø 9mm used for the construction of brass chandeliers or luminaires.

M6 tapped knurled hemispherical head decorative brass cap nut for lighting fittings

Brass and bronze creation for luminaire

Decorative brass cap nut with knurled hemispherical head M6 Ø 12mm for lighting fittings

DIY095-210007

€1.00

Decorative brass cap nut with knurling Ø 12mm used for the construction of brass chandeliers or luminaires.

Decorative brass cap nut, hemispherical knurled head, M6 threaded

Brass and bronze creation for luminaire

M6 tapped knurled hemispherical head decorative brass cap nut for lighting fittings

DIY095-210003

€1.00

Decorative brass cap nut with knurling Ø 12mm used for the construction of brass chandeliers or luminaires.

Knurled decorative brass cap nut with M6 thread

Brass and bronze creation for luminaire

M5 tapped knurled decorative brass cap nut for lighting fittings

DIY095-204016

€1.00

Decorative ball-shaped brass cap nut with knurling Ø 12mm used for the construction of brass chandeliers or luminaires.

Brass and bronze creation for luminaire

M5 threaded decorative brass ball cap nut for lighting fittings

DIY095-204011

€1.10

Decorative Ø 10mm ball-shaped brass cap nut used in the construction of brass chandeliers or light fittings.

Brass and bronze creation for luminaire

Decorative brass ball cap nut with M10 threaded hexagonal profile for lighting fittings

DIY095-204009

€1.00

Decorative ball-shaped brass cap nut with hex base used for the construction of brass chandeliers or light fittings.

Brass and bronze creation for luminaire

M6 threaded decorative brass ball cap nut for lighting fittings

DIY095-204004

€1.10

Decorative Ø 10mm ball-shaped brass cap nut used in the construction of brass chandeliers or light fittings.

Brass and bronze creation for luminaire

M6 tapped knurled decorative brass cap nut for lighting fittings

DIY095-204002

€1.00

Decorative ball-shaped brass cap nut with knurling Ø 12mm used for the construction of brass chandeliers or luminaires.

Knurled decorative cylindrical brass cap nut with M4 thread

Brass and bronze creation for luminaire

M4 tapped decorative knurled brass cap nut for lighting fittings

DIY095-210031

€1.00

Decorative brass cylindrical cap nut with knurling Ø 8mm used for the construction of brass chandeliers or luminaires.

M4 knurled ball head cap nut in decorative brass

Brass and bronze creation for luminaire

M4 tapped knurled ball head decorative brass cap nut for lighting fittings

DIY095-210023

€1.10

Decorative brass cap nut with knurling Ø 10mm used for the construction of brass chandeliers or luminaires.

Decorative brass cap nut with knurled hemispherical head and M4 thread

Brass and bronze creation for luminaire

M4 tapped knurled hemispherical head decorative brass cap nut for lighting fittings

DIY095-210018

€1.00

Decorative brass cap nut with knurling Ø 12mm used for the construction of brass chandeliers or luminaires.

Knurled decorative brass cap nut with M4 thread

Brass and bronze creation for luminaire

M4 tapped decorative brass ball cap nut for lighting fittings

DIY095-204044

€1.00

Decorative ball-shaped brass cap nut with knurling Ø 12mm used for the construction of brass chandeliers or luminaires.

Brass and bronze creation for luminaire

M4 threaded decorative brass ball cap nut for lighting fittings

DIY095-204008

€1.10

Decorative Ø 10mm ball-shaped brass cap nut used in the construction of brass chandeliers or light fittings.

Tube and threaded accessory

Stainless steel reducer size according to version

Réduction-inox

€3.24

Stainless steel reducer ISO internal - external thread - choice of dimensions

Brass ring - nut diameter 20.5mm thickness 6mm

Nut and washer

Brass ring - nut diameter 20.5mm for threaded tube M10 height 6mm

DIY093-202022

€1.64

Brass bushes are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

Brass ring - nut diameter 24mm thickness 14mm

Nut and washer

Brass ring - nut diameter 24mm for M10 threaded tube, height 14mm

DIY093-202019

€3.50

Brass bushes are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

Brass ring - nut diameter 35mm thickness 8mm

Nut and washer

Brass ring - nut diameter 35mm for threaded tube M10 height 8mm

DIY093-202018

€4.45

Brass bushes are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

Brass ring - nut diameter 25mm thickness 10mm

Nut and washer

Brass ring - nut diameter 25mm for threaded tube M10 height 10mm

DIY093-202016

€2.70

Brass bushes are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

Brass ring - nut diameter 40mm thickness 8mm

Nut and washer

Brass ring-nut diameter 40mm for threaded tube M10 height 8mm

DIY093-202015

€6.52

Brass bushes are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

Brass ring - nut diameter 25mm thickness 8mm

Nut and washer

Brass ring - nut diameter 25mm for threaded tube M10 height 8mm

DIY093-202014

€2.10

Brass bushes are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

Brass ring - nut diameter 30mm thickness 6mm

Nut and washer

Brass ring - nut diameter 30mm for threaded tube M10 height 8mm

DIY093-202013

€3.48

Brass bushes are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

Nut and washer

Brass ring - nut diameter 20.5mm for threaded tube M10 height 6mm

DIY093-202012

€1.30

Brass bushes are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

Brass ring - nut diameter 22mm thickness 6mm

Nut and washer

Brass ring - nut diameter 22mm for threaded tube M10 height 6mm

DIY093-202010

€1.70

Brass bushes are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

Brass ring - nut diameter 22mm for M10 threaded tube

Nut and washer

Brass ring - nut diameter 22mm for threaded tube M10 height 10mm

DIY093-202009

€1.90

Brass bushes are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

Nut and washer

Brass ring - nut diameter 22mm for threaded tube M10 height 8mm

DIY093-202008

€1.95

Brass bushes are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

Nut and washer

Brass ring-nut, diameter 19mm, for M10 threaded tube, height 6mm

DIY093-202007

€1.00

Brass bushes are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

Brass ring nut for threaded tube M10 diameter 16mm

Nut and washer

Brass ring - nut diameter 16mm for threaded tube M10 height 8mm

DIY093-202006

€0.90

Brass bushes are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

Brass ring diameter 18mm threaded M10 with 33mm wolf's mouth machining

Nut and washer

Brass ring nut diameter 18mm threaded M10 with wolf's mouth machining Ø 33mm

DIY093-202005

€1.00

Brass bushes are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

Brass ring diameter 18mm threaded M10 with radial wolf's mouth machining

Nut and washer

Brass ring nut diameter 18mm threaded M10 with wolf's mouth machining Ø 19mm

DIY093-202004

€1.10

Brass bushes are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

Nut and washer

Brass ring - nut diameter 20mm for threaded tube M10 height 10mm

DIY093-202003

€1.44

Brass bushes are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

Nut and washer

Brass ring-nut, diameter 19mm, for M10 threaded tube, height 8mm

DIY093-202002

€1.20

Brass bushes are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

Brass ring nut for threaded tube M10 diameter 16.5mm

Nut and washer

Brass ring - nut diameter 16.5mm for threaded tube M10 height 6mm

DIY093-202001

€1.20

Brass bushes are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

Nut and washer

16 mm diameter brass tube with M10 thread, 45 mm high

DIY092-205048

€5.90

Brass tubes are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

threaded brass ring for M10 tube 13mm diameter

Nut and washer

M10 brass threaded ring, diameter 12mm, height 20mm

DIY092-205023

€1.25

Brass bushes are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

Nut and washer

M10 brass threaded ring, diameter 15mm, height 20mm

DIY092-205022-M10

€2.20

Brass bushes are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

Nut and washer

M10 threaded brass ring, diameter 13mm, height 15mm

DIY092-205021

€1.84

Brass bushes are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

threaded brass ring for M10 tube, 16 mm diameter

Nut and washer

M10 threaded brass ring, diameter 16mm, thickness 10mm

DIY092-205020

€1.60

Brass bushes are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

brass threaded ring for tube M10 diameter 18mm

Nut and washer

M10 threaded brass ring, diameter 18mm, thickness 7mm

DIY092-205017

€1.20

Brass bushes are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

Nut and washer

Low zinc-plated nut for M20 tube, 1.5 mm pitch, 3 mm thick

écrou-zinc-M20-pas1.5mm

€1.20

Low zinc-plated steel nuts are perfect for assembling light fittings and chandeliers mounted on M20 hollow rods.

Nut and washer

Low zinc-plated nut for M16 tube, 1.5 mm pitch, 4 mm thick

écrou-zinc-M16-pas1.5mm

€0.65

Low zinc-plated steel nuts are perfect for assembling light fittings and chandeliers mounted on M16 hollow rods.

Tube and threaded accessory

Low zinc-plated nut for M14 tube, 1.5 mm pitch, 7 mm thick

écrou-zinc-M14-pas1.5mm

€0.55

Low zinc-plated steel nuts are perfect for assembling light fittings and chandeliers mounted on M14 hollow rods.

Tube and threaded accessory

Low zinc-plated nut for M14 tube, 1mm pitch, 7mm thick

écrou-zinc-M14-pas1mm

€0.55

Low zinc-plated steel nuts are perfect for assembling light fittings and chandeliers mounted on M14 hollow rods.

30mm diameter flanged washer for M10 threaded luminaire - colours in 8 variations

Tools and assembly accessories

Washer with flange diameter 52mm for M10 threaded luminaire - colours in 8 variations

Rondelle-rebord-Ø52

€2.10

Washers with 52mm diameter rim. Choose the colour you need from the range.

Tools and assembly accessories

Washer with flange diameter 45mm for M10 threaded luminaire - colours in 8 variations

Rondelle-rebord-Ø45

€2.00

Washers with 45mm diameter rim. Choose the colour you need from the range.

Tools and assembly accessories

Washer with flange diameter 38mm for M10 threaded luminaire - colours in 8 variations

Rondelle-rebord-Ø38

€1.90

Washers with 38mm diameter rim. Choose the colour you need from the range.

Product available with different options

Tools and assembly accessories

35mm diameter flanged washer for M10 threaded luminaire - colours in 8 variations

Rondelle-rebord-Ø35

€1.80

Washers with 35mm diameter rim. Choose the colour you need from the range.

View

Tools and assembly accessories

Washer with flange diameter 32mm for M10 threaded luminaire - colours in 8 variations

Rondelle-rebord-Ø32

€1.60

Washers with flange in 32mm diameter. Choose the colour you need from the range.

Tools and assembly accessories

Washer with flange diameter 16mm for M10 threaded luminaire - colours in 8 variations

Rondelle-rebord-Ø16

€1.35

Washers with 16mm diameter rim. Choose the colour you need from the range.

Tools and assembly accessories

Washer with flange diameter 19mm for M10 threaded luminaire - colours in 8 variations

Rondelle-rebord-Ø19

€1.38

Washers with 19mm diameter rim. Choose the colour you need from the range.

Tools and assembly accessories

25mm diameter flanged washer for M10 threaded luminaire - colours in 8 variations

Rondelle-rebord-Ø25

€1.43

Washers with 27mm diameter rim. Choose the colour you need from the range.

Out-of-Stock

Tube and threaded accessory

low dichromate nut for M8 tube, 0.75mm pitch, 2.5mm thick

écrou-bichromaté-M8-2.5mm

€0.16

The low, dichromate-coated steel nuts are perfect for assembling light fittings and chandeliers mounted on M8 hollow rods.

View

Nut and washer

Low zinc-plated nut for M12 tube, 1mm pitch, 3mm thick

écrou-zinc-M12-3mm

€0.20

Low zinc-plated steel nuts are perfect for assembling light fittings and chandeliers mounted on M12 hollow rods.

Tube and threaded accessory

Low zinc-plated nut for M8 tube, 1mm pitch, 3mm thick

écrou-zinc-M8-3mm

€0.15

Low zinc-plated steel nuts are perfect for assembling light fittings and chandeliers mounted on M8 hollow rods.

Tube and threaded accessory

Low zinc-plated nut for M10 tube, 1mm pitch, 3mm thick

écrou-zinc-M10-3mm

€0.15

Low zinc-plated steel nuts are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

low zinc-plated nut for M10 tube, 1mm pitch, 2.2mm thick

Tube and threaded accessory

Low zinc-plated nut for M10 tube, 1mm pitch, 2mm thick

écrou-zinc-M10-2mm

€0.14

Low zinc-plated steel nuts are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

Brass and bronze creation for luminaire

Brass washer with M10 hole flange for light fittings - diameter 15 to 50mm

DIY086-laiton-bord

€1.48

Brass washer with flange used for the construction of brass chandeliers or light fittings.

M10 chrome-plated steel cable feed-through terminal for suspension cable feed-through

Chain, cable, rope, ball and pendant

M10 threaded chrome-plated steel terminal for suspension cable mounting

Borne-cable-suspendu-M10

€0.70

Chrome-plated steel terminal for suspension cable.

Cable clamp, cable fastener, screws, interlock button

M10 chrome-plated steel electrical cable feed-through terminal on suspended cable

Borne-cable-suspendu-M10

€0.70

Chrome-plated steel bollard for passing electrical wires through suspended cables.

Electrical cable terminal on tensioned cable

Cable clamp, cable fastener, screws, interlock button

Chrome-plated steel electrical cable bollard on tensioned cable

Borne-cable-tendu

€0.70

Chrome-plated steel bollard for passing electrical wires over tensioned cable.

Brass reducer for electric threaded tube

Tube and threaded accessory

Reducer for brass electrical threaded tube size according to variant

Réduction-laiton

€1.49

Reducer for electrical brass tube, internal/external thread - choice of dimensions

Brass ring nut for threaded tube M10 diameter 13mm

Nut and washer

Brass ring - nut diameter 13mm for M10 threaded tube

DIY101215002-laiton-M10-13mm

€0.80

Brass bushes are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

Nut and washer

Chrome-plated ring nut for M10 threaded tube with M4 screw lock

anneau-ecrou-chrome-M10

€0.70

Chrome-plated steel bushes are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

Round washer Ø 100mm colour for luminaire / M10 threaded lamp socket

Tools and assembly accessories

Domed washer diameter 100mm for M10 threaded luminaire - colours in 9 variations

Rondelle-bombé-Ø100-

€4.44

Domed washers with a diameter of 100mm. Choose the colour you need from the range.

Convex washer Ø 90mm colour for luminaire / M10 threaded lamp socket

Tools and assembly accessories

90mm diameter domed washer for M10 threaded luminaire - colours in 9 variations

Rondelle-bombé-Ø90-

€3.10

Domed washers with a diameter of 90mm. Choose the colour you need from the range.

Convex washer Ø 80mm colour for luminaire / M10 threaded lamp socket

Out-of-Stock

Tools and assembly accessories

80mm diameter domed washer for M10 threaded luminaire - colours in 9 variations

Rondelle-bombé-Ø80-

€2.50

Domed washers with a diameter of 80mm. Choose the colour you need from the range.

View

Round washer Ø 70mm colour for luminaire / M10 threaded lamp socket

Tools and assembly accessories

Cambered washer diameter 70mm for M10 threaded luminaire - colours in 9 variations

Rondelle-bombé-Ø70-

€2.00

Curved washers with a diameter of 70mm. Choose the colour you need from the range.

Convex washer Ø 60mm colour for luminaire / M10 threaded lamp socket

Tools and assembly accessories

Domed washer diameter 60mm for M10 threaded luminaire - colours in 9 variations

Rondelle-bombé-Ø60-

€1.60

Domed washers with a diameter of 60mm. Choose the colour you need from the range.

Convex washer Ø 50mm colour for luminaire / M10 threaded lamp socket

Tools and assembly accessories

Domed washer diameter 50mm for M10 threaded luminaire - colours in 9 variations

Rondelle-bombé-Ø50-

€1.00

Domed washers in 50mm diameter. Choose the colour you need from the range.

Domed washer Ø 40mm colour for luminaire / M10 threaded lamp socket

Tools and assembly accessories

40mm diameter domed washer for M10 threaded luminaire - colours in 9 variations

Rondelle-bombé-Ø40-

€0.80

Domed washers with a diameter of 40mm. Choose the colour you need from the range.

Domed washer Ø 30mm colour for luminaire / M10 threaded lamp socket

Tools and assembly accessories

30mm diameter domed washer for M10 threaded luminaire - colours in 9 variations

Rondelle-bombé-Ø30-

€0.60

Domed washers with a diameter of 30mm. Choose the colour you need from the range.

Product available with different options

Nut and washer

M10 domed chrome washer for lighting fittings - diameter from 30 to 160mm

DIY-080-chrome-bombée

€0.60

Domed chrome washer with hole for M10 electrical tube.

View

GU10 cap on M20.8mm zinc notched nut ring

Bulb caps

GU10 cap on M28 threaded zinc nut with 2mm pitch

Culot GU10-M28

€4.26

ThreadedGU10 base Ø M28mm for assembling luminaires and light fittings.

Cable clamp, cable fastener, screws, interlock button

Wall-mounted brass bollard for electrical cables

DIY179-Borne-laiton-4S

€7.50

Brass bollard for decorative wall-mounted electrical cables

Flat brass washer, thickness 2mm, diameter 20 to 90mm

Screw, nut, threaded tube and plug, sleeve, washer, reducer

M10 brass washer for light fittings - diameter 20 to 100mm

DIY101-laiton

€0.72

Brass washer, thickness 1.5-2mm, used for the construction of brass chandeliers or light fittings.

Rounded brass washer, thickness 1mm, diameter 51-155mm

Screw, nut, threaded tube and plug, sleeve, washer, reducer

Rounded brass washer M10 for light fittings - diameter 51 to 155mm

DIY169-laiton-bombée

€3.54

Curved brass washer, thickness 1mm, used for the construction of brass chandeliers or light fittings.

Tube and threaded accessory

Reducer for electric threaded tube in galvanised steel size according to variant

Réduction

€0.54

Reducer for internally/externally threaded electrical pipe in galvanised steel - choice of dimensions

Brass washer for 30mm diameter M10 lighting tube

Brass and bronze creation for luminaire

Brass washer for M10 screw external diameter 30mm thickness 2mm

Rondelle-laiton-M10X30

€1.90

Brass washer, thickness 2mm, used for the construction of chandeliers or luminaires

Tube and threaded accessory

Zamac serrated nut for M20.8mm threaded ring with 2mm pitch

écrou-bague-M20,8

€0.95

Zamac serrated nut for assembling luminaires and lighting fixtures mounted on G9 or G4 lampholders.

Tube and threaded accessory

Low zinc-plated nut for M10 tube, 1mm pitch, 4mm thick

écrou-zinc-M10-4mm

€0.16

Low zinc-plated steel nuts are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

Notched brass-plated washer nut for M10 threaded tube

Out-of-Stock

Tube and threaded accessory

M10 notched nut - brass-coloured zinc-coated steel washer and nut

Rondelle-cranté-ecrou-M10-laiton

€0.35

Brass-style zinc-coated steel washers are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

View

Notched zinc-plated hexagonal washer nut for M10 threaded tube

Nut and washer

Zinc-plated steel lock washer for M10 threaded tube

Rondelle ecrou-zingué-M10

€0.35

Zinc-plated steel notched washers are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

Tube and threaded accessory

Brass hexagon nut for M8 threaded tube, 1mm pitch

Ecrou-laiton-M8

€0.39

The low brass nuts are perfect for assembling light fittings and chandeliers mounted on M8 hollow rods.

Tube and threaded accessory

Brass hexagon nut for M12 threaded tube, 1mm pitch

Ecrou-laiton-M12

€0.60

The low brass nuts are perfect for assembling light fittings and chandeliers mounted on M12 hollow rods.

Tube and threaded accessory

Brass hexagon nut for M6 threaded tube, 1mm pitch

Ecrou-laiton-M6

€0.25

The low brass nuts are perfect for assembling light fittings and chandeliers mounted on M6 hollow rods.

Tube and threaded accessory

Brass hexagon nut for M10 threaded tube, 1mm pitch

Ecrou-laiton-M10-e3.5mm

€0.42

Low brass nuts are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

1mm thick chrome-GOLD washer 30-200mm diameter

Nut and washer

M10 chrome-plated washer, thickness 1mm, for lighting fixtures - diameter 30-200mm

DIY-080-OR

€0.86

Gold-coloured chrome washer, 1mm thick, used in the construction of chandeliers or chrome-plated metal luminaires.

M10 chrome washer, thickness 1mm, diameter 30-200mm

Nut and washer

M10 chrome-plated washer, thickness 1mm for light fittings - diameter 30-200mm

DIY-080

€0.79

M10 chromed washer, thickness 1mm, used for the construction of chandeliers or luminaires in chromed metal.

Tools and assembly accessories

Nylon adapter ring for E27 or B22 to E14 lampshade

Anneau E27-E14

€0.65

These small nylon rings make it easy to fit a large-diameter shade to an E14 lampholder.

Zinc-plated serrated washer for M10 threaded tube

Nut and washer

Zinc-plated serrated fan washer for M10 threaded tube

Rondelle dentelée M10

€0.15

This fan lock washer is particularly suitable for assembling luminaires fitted with a socket on a hollow stem.

Tube and threaded accessory

Threaded insert for M10 tube, 1mm pitch

Insert fileté-M10

€0.42

Self-tapping sockets ideal for assembling light fittings and chandeliers mounted on M10 hollow rods.

Showing 1-199 of 199 item(s)