A 5 metre IP68 waterproof RGB colour-changing LED strip with an alternating white LED light
A colour -changingRGB LED strip on which we've added LEDs normally reserved for traditional lighting, so an alternation of RGB LEDs and white SMD FORMAT 5050 LEDs.
Sublime pastelcolours thanks to the alternating SMD 5050 LEDs on this LED ribbon, shades of colour that are impossible to achieve with a traditional RGB LED strip.
This assembly will enable this coloured LED ribbon to be used in two ways.
Usually used as decoration, this installation can also be used as interior lighting.
as interior lighting.
In conjunction with a suitable colour controller, you'll be able to switch on the white LEDs alone and add a tiny nuance of warm colour thanks to the coloured LEDs. You can then obtain a multitude of colours, from pure white to warm white.
It does not have an adhesive surface. You can use the small jumpers available as accessories to attach it.
This LED strip is encased in a rectangular silicone tube, with the same material injected inside to ensure a totally watertight seal.
It's easy to cut! Just use a pair of scissors to cut the strip.
However, you'll need to re-seal the end of the cut with the silicone plug offered as an accessory.
Product description :
LED 3 SMD cores type 5050
Number of LEDs: 60 LEDs / metre - 30 RGB and 30 white
Light colour: RGB plus white
Diffusion angle: over 150
Lifespan: 50000 hours
Luminous flux: 560 lumens/metre
Power consumption: 14.4 watts/metre
Dimensions: 5 metres x 12 mm x 4.5mm thick
Voltage: 12 volts DC
Protection rating: IP68
Safety certification: CE & ROHS
