Lightweight warm white 230 volt LED strip in rolls of 25, 50 or 100 metres

230 volt LED strip, light warm white light colour - roll of 25, 50 or 100 metres

The 230-volt warm white LED Strips are very easy to install because you don't need a transformer or power amplifiers, even over very long distances.

Roll of
€175.10
Tax included

Description

An IP67 waterproof 230-volt LED strip with SMD 5050 LEDs in a light warm white light colour.

The special construction of this LED strip, with the 230-volt power supply cables integrated into the silicone resin on both sides, means that it can be used over very long distances - up to a hundred metres - without the need for a transformer.

This neutral light colour of warm white at 4000 Kelvin is ideal for rooms that need bright light, such as kitchens or bathrooms...

However, despite its excellent IP67 waterproof rating, it cannot be immersed in water (in a swimming pool, for example) as accidental damage to the ribbon would be far too dangerous.

The IP67 waterproof rating of this 230 volt LED ribbon means it can be used outdoors, for example on the underside of a roof or to illuminate the perimeter of a house.

However, you'll need to pay particular attention to the waterproofing of the electrical input connections and the termination plug.



Strip LED 230 volts couleurs eclairage

We offer these 230-volt LED strips in three shades of lighting colour: White 6000 kelvin, Light Warm White at 4000 kelvin, and Warm White at 3000 kelvin.

Strip LED 230 volts les couleurs eclairage

These flexible rollers are protected by an IP67 silicone sealing resin but are not fitted with a self-adhesive strip.
However, a 3M double-sided adhesive is available as an accessory, along with silicone fasteners.

Strip LED 230 volts accessoire installation

Mise en place du câble d'alimentation strip LED

The 230 volt LED strips can be cut every 1 metre at specific points.

Strip LED 230 volts montage

Product description :
Sold in rolls of 25 metres, 50 metres or 100 metres (depending on version)
Number of LEDs: 60 LEDs per metre type 5050
Power supply: 85 to 277 volts AC
Power factor: >0.9
Lifetime: > 50,000 hours
Power consumption: 14 watts / metre
Dimensions: 100 metre maximum roll length x 12 mm x 7 mm thickness
Brightness: 980 lumens warm white light
Protection rating: IP67
Weight: 120 g per metre
Our products are guaranteed for one year

Precautions for use :
A special plug-in power supply cable is essential for connecting a 230-volt LED ribbon.
This cable has a small voltage regulator box for 230-volt LED strips and is fitted at the end with a two-pin rapid connector. This accessory is available at the bottom of the product data sheet.

We advise you not to look at the light for long periods, even with protective glasses.

Product Details
50-mètres

You might also like

Customers who bought this product also bought:

Product added to compare.