24 volt DC LED strip, 15 mm wide, a double assembly of 5050 RGB LEDs for multicolour lighting and other 3528 format LEDs for traditional white lighting.
Its IP20 protection rating means it can be used indoors, protected from splashing water.
Alternating white SMD 5050 LEDs on this ribbon produce sublime pastel colours.
These nuances of colour bring an additional functionality to this RGB LED strip, the possibility of using it for classic lighting.
By combining it with a suitable colour controller, you can switch on the warm white LEDs and add a shade of white, blue or mauve using the RGB LEDs.
This controller allows you to obtain a multitude of colours ranging from warm white to pure white with the addition of RGB LEDs.
You can cut and connect your LED strip with ease! Just use a pair of scissors to cut every 12 LEDs, i.e. every 10 cm.
The LED Strip is sold on its own , which means you can choose the power supply, lighting management system and any other elements you need to install your LED ribbon to suit your requirements. These are available in the LED Strip accessories section and in part at the bottom of the product sheet.
Product description :
Number of LEDs: 120 LEDs / metre - 60 RGB and 60 White
Light colour: RGB + White
Diffusion angle: over 150
Lifespan: 50000 hours
Luminous flux: 782 lumens/metre
Power consumption: 19.2 watts/metre
Ribbon dimensions: Length 5 metres; Width 15 mm; Thickness 2mm
Circuit board: 5 tracks
Pin spacing: 2.8 mm
Voltage: 24 volts DC
Safety assurance: CE & ROHS
