24 volt DC LED strip with a width of 17mm, combining RGB 5050 LEDs to create a multicoloured lighting ambience and classic 3528 LEDs on another row for traditional white lighting.
A translucent resin is installed on this LED ribbon, making it waterproof (IP65 standard) for use indoors, but also outdoors, provided the ribbon is protected from splashing water.
Sublime pastelcolours thanks to the addition of SMD 5050 LEDs underneath the 5050 RGB LEDs, enabling you to create shades of colour that would be impossible to achieve with a traditional RGB LED strip.
This assembly will enable this coloured LED strip to be used in two ways.
Usually used as decoration, this installation can also be used as interior lighting.
By combining it with a suitable colour controller, you can switch on the warm white LEDs and add a shade of white, blue or mauve using the RGB LEDs.
This controller allows you to obtain a multitude of colours ranging from warm white to pure white with the addition of RGB LEDs.
You can cut and connect your LED strip with ease! Cutting is done with a simple pair of scissors every 12 LEDs or every 10 cm.
Product description :
Number of LEDs: 120 LEDs / metre - 60 RGB and 60 Warm White
Light colour: RGB + White
Diffusion angle: over 150
Lifespan: 50000 hours
Luminous flux: 315 lumens/metre
Power consumption: 9.2 watts/metre
Ribbon dimensions: Length 5 metres; Width 17 mm; Thickness 4mm
Circuit board: 5 tracks
Pin spacing: 2.8 mm
Voltage: 24 volts DC
Safety assurance: CE & ROHS
