This 30 m linear roll allows you to cut lengths as you wish.
However, you'll need to install a signal amplifier every 5 metres or less to ensure optimum power supply and duplicate the colourimetric signal and light intensity of the previous strip.
A translucentresin is installed on this LED ribbon, making it waterproof (IP65 standard) for use indoors, but also outdoors, provided the ribbon is protected from splashing water.
Itcan be installed as a main source of lighting for comfortable, glare-free diffusion, or as an indirect source, positioned as a cove around the edge of your ceiling or at the edge of a suspended island in the centre of the room. You'll also be able to decorate and create an atmosphere in your shop windows, highlighting shelves, under a bar counter, on your terrace, banisters and stair treads etc...
You can easily cut and connect your LED strip! Just use a pair of scissors to cut every 3 LEDs, i.e. every 5 cm.
The LED Strip is sold on its own , which means you can choose your power supply, lighting management system and any other elements you need to install your LED ribbon according to your requirements. These are available in the LED Strip accessories section and in part at the bottom of the product sheet.
Product description:
3-core LED strip type 5050 SMD
Number of LEDs: 60 LEDs / metre
Light output: 378 Lumens per metre, i.e. a total of 1890 Lm for 5 metres
Light colour change : RGB
Diffusion angle: over 150
Service life: 50,000 hours
Power consumption: 14.4 watts/metre
Ribbon dimensions: Length 30 metres; Width 10 mm; Thickness 3mm
Circuit board: 4 tracks
Pin spacing: 2.4 mm
Supply voltage: 12 volts DC
Waterproof protection: IP65 standard
Safety assurance: CE & ROHS
Our products come with a one-year guarantee.
