A revolutionary "all in one" LED chip: it combines the three primary RGB colours in a single LED chip for festive and decorative lighting effects.
In this same LED, a conventional SMD core will enable this LED ribbon to be used for standardised lighting.
A translucent resin is installed on this LED ribbon, making it waterproof (IP65 standard) for use indoors, but also outdoors, provided the ribbon is protected from splashing water.
A small shade of red, green or blue will blend into the luminous flux of the standard warm white lighting, giving you soothing ambient lighting effects. An RGBW controller lets you programme alternating colours in your living room or kitchen...
The LED Strip is sold on its own, so you can choose your power supply, your lighting management system and all the connection accessories you need to install your LED strip to suit your requirements. These products are available in the Strip LED accessories section and in part at the bottom of the product sheet.
You can cut and connect your LED Strip very easily! Cutting is done with a simple pair of scissors every 6 LEDs, i.e. every 5 cm.
Product description :
Number of LEDs per metre: 60 "All In One" RGB-WW LEDs
Light colour: RGB + Warm White
Diffusion angle: over 150
Lifespan: 50,000 hours
Luminous flux: 782 lumens/metre
Power consumption: 9.6 watts/metre
Ribbon dimensions: Length 5 metres; Width 12 mm; Thickness 3mm
Circuit board: 5 tracks
Pin spacing: 1.8 mm
Voltage: 12 volts DC
Safety assurance: CE & ROHS
