5-metre self-adhesive flexible LED strip with 30 LEDs per metre, type SMD 5050, light warm white light colour.
A translucent resin is installed on this LED ribbon, making it waterproof, so it meets the IP65 standard for indoor use, but also for outdoor use, provided the ribbon is protected from splashing water.
A multitude of possible uses: It can be installed as the main source of lighting for comfortable, glare-free illumination, or indirectly, positioned as a cove around the perimeter of your ceiling or at the edge of a suspended island in the centre of the room. You'll also be able to decorate and create an atmosphere in your shop windows, highlighting shelves, under a bar counter, on your terrace, banisters and stair treads etc...
It's easyto cut and connect! Just use a pair of scissors to cut the LED strip every 3 LEDs, i.e. every 10 cm.
The LED Strip is sold on its own , which means you can choose your power supply, lighting management system and any other elements you need to install your LED ribbon to suit your requirements. These are available in the LED Strip accessories section and in part at the bottom of the product sheet.
Product description:
Strip LED with 3 cores type 5050 SMD
Number of LEDs: 30 LEDs / metre
Light output: 430 Lumens per metre, i.e. a total of 2250 Lm for 5 metres
Single light colour: white 5200 K°.
Diffusion angle: over 150
Lifespan: 50,000 hours
Power consumption: 7.2 watts/metre (36 watts for 5 metres)
Ribbon dimensions: Length 5 metres; Width 10 mm; Thickness 3mm
Circuit board: 2 tracks
Pin spacing: 5 mm
Supply voltage: 12 volts DC
Waterproof protection: IP65 standard
Safety assurance: CE & ROHS
Our products are guaranteed for one year
This product can be used with dimmers, but only with models available in the Strip LED accessories category.
