This 30-metre flexible self-adhesive tape features a lateral LED arrangement for edge-lit illumination and 120 SMD 335 LEDs per metre in a warm white light colour.
This LED ribbon is coated with a translucent resin, making it waterproof to IP65 standard for use indoors and outdoors, provided the ribbon is protected from splashing water.
A whole host of possible uses: it can be installed as the main source of lighting for comfortable, glare-free illumination, or indirectly, positioned as a cove around the edge of your ceiling or at the edge of a suspended island in the centre of the room. You'll also be able to decorate and create an atmosphere in your shop windows, highlighting shelves, under a bar counter, on your terrace, banisters and stair treads etc...
You can easilycut and connect your LED strip! Just use a pair of scissors to cut every 3 LEDs, i.e. every 5 cm.
The LED Strip is sold on its own , which means you can choose your power supply, lighting management system and any other elements you need to install your LED ribbon according to your requirements. These are available in the LED Strip accessories section and in part at the bottom of the product sheet.
Product description:
Single core LED strip type 335 SMD
Number of LEDs: 120 LEDs / metre
Light output: 420 Lumens per metre, i.e. a total of 2100 Lm for 5 metres
Single light colour: warm white 3300 K
Diffusion angle: over 120
Service life: 50,000 hours
Power consumption: 10 watts per metre
Ribbon dimensions: Length 30 metres; Width 8 mm; Thickness 2.7 mm
Circuit board: 2 tracks
Pin spacing: 5 mm
Supply voltage: 12 volts DC
Waterproof protection: IP65 standard
Safety assurance: CE & ROHS
Our products come with a one-year guarantee.
This product can be used with dimmers, but only with models available in the Strip LED accessories category.
