Flexible, self-adhesive LED strip with 30 LEDs per metre, type SMD 3528, warm white light colour.
A translucent resin is installed on this LED strip, making it waterproof (IP65 standard) for use indoors, but also outdoors, provided the strip is protected from splashing water.
A multitude of possible uses: it can be installed as the main source of lighting for comfortable, glare-free illumination, as an indirect light, as a coving around the perimeter of your ceiling or as the edge of a suspended island in the centre of the room. You'll also be able to decorate and create an atmosphere in your shop windows, highlighting shelves, under a bar counter, on your terrace, banisters and stair treads etc...
You can easily cut and connect your LED strip! Just use a pair of scissors to cut every 3 LEDs, i.e. every 5 cm.
The LED Strip is sold on its own , which means you can choose your power supply, lighting management system and any other elements you need to install your LED ribbon, which are available in the LED Strip accessories section and in part at the bottom of the product sheet.
Product description:
3-core LED strip type 3528 SMD
Number of LEDs: 30 LEDs / metre
Light output: 150 Lumens per metre, i.e. 750 Lumens for 5 metres
Single light colour: warm white 3300 K
Diffusion angle: over 150
Lifespan: 50,000 hours
Power consumption: 2.8 watts per metre (14 watts for 5 metres)
Ribbon dimensions: Custom length; Width 8mm; Thickness 3mm
Circuit board: 2 tracks
Pin spacing: 4.5 mm
Supply voltage: 12 volts DC
Waterproof protection: IP65 standard
Safety assurance: CE & ROHS
Our products come with a one-year guarantee.
This product can be used with dimmers, but only with models available in the Strip LED accessories category.
