Flexible, self-adhesive LED strip with 120 LEDs per metre, type SMD 3528, white light colour.
A translucent resin is installed on this LED ribbon, making it waterproof, so it meets the IP65 standard for use indoors, but also outdoors, provided the ribbon is protected from splashing water.
A multitude of possible uses: It can be installed as the main source of lighting for comfortable, glare-free illumination, or indirectly, positioned as a cove around the perimeter of your ceiling or at the edge of a suspended island in the centre of the room. You'll also be able to decorate and create an atmosphere in your shop windows, highlighting shelves, under a bar counter, on your terrace, banisters and stair treads etc...
You can easily cut and connect your LED strip! Just use a pair of scissors to cut every 3 LEDs, i.e. every 5 cm.
The LED Strip is sold on its own without a power supply and without lighting management equipment. However, dimmers and power supplies adapted to the LED Strip are offered below in the description in the "Accessories" section.
Product description:
Strip LED with 3 cores type 3528 SMD
Number of LEDs: 120 LEDs / metre
Light output: 600 Lumens per metre or 3000 Lumens for 5 metres
Single light colour: white 5200 K
Diffusion angle: over 150
Lifespan: 50,000 hours
Power consumption: 9.6 watts per metre, i.e. 48 watts for 5 metres.
Ribbon dimensions: Custom length; Width 8 mm; Thickness 3 mm
Circuit board: 2 tracks
Pin spacing: 4.5 mm
Supply voltage: 12 volts DC
Waterproof protection: IP65 standard
Safety assurance: CE & ROHS
Our products come with a one-year guarantee.
This product can be used with dimmers, but only with the models available in the
available in the Strip LED accessories category
