Home

LED strip

LED bulbs

Battery-operated headlamp and floodlight

Lighting and lighting design

LED spotlight

Low-voltage transformer

In-wall spotlight Bulb

Sockets, multipliers, risers, adapter sockets

LED strips and tubes

Promotions

DIY LED Integration

LED Panel and Downlight

Industrial & Public Lighting

LED Deco & Celebrations

Solar LED

LED horticultural lighting

Food Product Lighting

Electrical cables, connectors and tools

LED aquarium lighting

Lighting management

Spectrum lighting and colour decoration

LED dimmer and controller

Silicone colour filter

UV LED light

Tools and connectors

Lampholder and base

Socket with E12 base in brass - crimp cable connection on pins

Douille-E12-sertir

€0.75

E12 crimp lampholder

Out-of-Stock

Lampholder and base

Socket with E12 base in brass - cable connection to be soldered on two lamellae

Douille-E12-souder

€0.80

E12 solder lamp holder

View

Brass E14 socket for soldering onto two lamellae

Lampholder and base

Chrome-plated brass E14 base lampholder - cable connection to be soldered on two lamellae

Douille-E14-souder

€0.85

E14 lamp holder for soldering

Brass and bronze creation for luminaire

Naya electric cable clamp in brass - silicon cable lock - M10 thread, 1mm pitch

DIY191-SC-Naya

€5.70

Naya brass electrical cable clamp for lamp socket or ceiling rose cable clamp with silicone cone

Chrome-plated brass electrical cable clamp with cable gland

Brass and bronze creation for luminaire

Chrome-plated brass electrical cable clamp - silicon cable lock - M10 thread, 1.5 mm pitch

serre-cable-M10-1.5mm

€2.95

Chrome-plated brass electrical cable clamp for light bulb socket or ceiling rose with M10 thread, 1.5 mm pitch.

M10 threaded brass electrical cable clamp with M4 locking screw

Cable clamp, cable fastener, screws, interlock button

23.6mm diameter M10 threaded brass electric cable clamp with M4 locking screw

DIY213-cz2

€2.90

Brass electrical cable clamp for lamp socket or ceiling rose with M10 thread.

Cable clamp, cable fastener, screws, interlock button

Brass electric cable clamp, diameter 18mm, M10 threaded with M4 locking screw

DIY212-cz1

€2.70

Brass electrical cable clamp for lamp socket or ceiling rose with M10 thread.

Tube and threaded accessory

Brass adaptor M10 male to female spout pitch

adapt-M10/M-PDB/F

€1.95

Small brass adaptor M10 male to female spout pitch

Tube and threaded accessory

Brass adaptor male spout pitch to female M10

adapt-PDB/M-M10/F

€1.95

Small brass adaptor male spout pitch to female M10

17.5mm diameter cable locking clevis two anti-pull cable claws

Cable clamp, cable fastener, screws, interlock button

17.5mm diameter cable locking clevis with two anti-pull cable claws - white nylon

chape-anti-trac-griffe-17.5-P

€0.45

This accessory is ideal for hanging your lights.

22mm diameter cable locking clevis to prevent cable traction

Cable clamp, cable fastener, screws, interlock button

22mm diameter cable locking clevis with two anti-pull cable claws - white nylon

chape-anti-trac-griffe-22-G

€0.49

This accessory is ideal for hanging your lights.

Cable clamp, cable fastener, screws, interlock button

Black nylon strain relief clevis for flat cable - bore 6.3 x 4.3mm

chape-noir-6.3-4.3

€0.26

This accessory is ideal for hanging lights from your ceiling.

Cable clamp, cable fastener, screws, interlock button

Black nylon strain relief clevis for round cable

chape-anti-trac-noir-rond

€0.25

This accessory is ideal for hanging lights from your ceiling.

Cable clamp, cable fastener, screws, interlock button

Black nylon suspension clevis, anti-pull cable lock

chape-bloc-noir

€0.25

This accessory is ideal for hanging lights from your ceiling.

Cable clamp, cable fastener, screws, interlock button

White nylon suspension clevis, anti-pull cable lock

chape-bloc-blanc

€0.25

This accessory is ideal for hanging lights from your ceiling.

Cable clamp, cable fastener, screws, interlock button

Brass wall-mounted bollard with knurled nut for electrical cable entry

Borne-laiton-moleté

€7.50

Brass bollard for decorative wall-mounted electrical cables

Tube and threaded accessory

Hexagonal profile 15mm brass riser with M10 threads

Manchon-rehausse-15mm

€3.00

This hexagonal brass sleeve is perfect for assembling M10 hollow rods.

Tube and threaded accessory

Hexagonal profile 10mm brass riser sleeve with M10 threads / tappings

Manchon-rehausse-10mm

€2.80

This hexagonal brass sleeve is perfect for assembling M10 hollow rods.

Tube and threaded accessory

Brass sleeve with hexagonal profile and two M10 threads and tappings

Manchon-M/F-M10

€4.75

This hexagonal brass sleeve is perfect for assembling M10 hollow rods.

Tube and threaded accessory

Hexagonal brass sleeve with double M10 thread and cable entry hole

manchon-M10-sezane

€4.15

This double-threaded hexagonal brass sleeve is perfect for assembling lamp sockets.

LED lamp holder for ceramic or glass luminaire

Sockets, multipliers, risers, adapter sockets

M56 aluminium LED lamp holder with round thread and M10 tube thread

Douille-support-aluminium M56

€10.56

This LED lamp holder makes it easy to install small LED light sources in your custom-made luminaires.

Tube and threaded accessory

Threaded rod in stainless steel 310 S pitch 1.5mm high temperature resistance - length...

inox-refrac-310-1metre

€60.00

This threaded galvanised steel tube is ideal for restoring old luminaires.

Electrical socket and switch

Brass-plated steel lever switch On / Off switch - cable connection

inter-cable-on-off-laiton

€7.80

Lamp power switch with lever knob

Electrical socket and switch

Micro switch with lever or rocker switch On / Off / On on plug or soldered - brass plated

Micro-inter-12J

€3.50

Micro Switch for switching on a lamp with lever button

33 mm diameter brass collar for E27 - Ø 72mm lampholder

Rosette, bell, claw and socket cover

Brass claw collar for luminaire support - diameter 33 mm for E27 lampholder - Ø 78mm

DIY1491270070

€7.80

Brass suspension claw, for holding a lampshade or glass luminaire with an integrated lampholder.

Threaded tube in galvanised steel, spout pitch 1 metre long

Tube and threaded accessory

Threaded galvanised steel tube with spout pitch - length 50 centimetres

DIY178-becs-50cm

€12.00

This threaded galvanised steel tube is ideal for restoring old luminaires.

Tube and threaded accessory

Threaded tube in galvanised steel with spout pitch - 1 metre long

DIY178-becs-1mètre

€25.00

This threaded galvanised steel tube is reserved for restoring old luminaires.

Tube and threaded accessory

Zinc-plated steel nut, hexagonal, threaded, 10.85 diameter, 1.33 mm pitch

Ecrou-zing-pas-des-becs

€0.60

These zinc-plated steel nuts, tapped to the spout pitch, are reserved for restoring old luminaires.

Flat electrical wire red black 2 wires 0.75mm² length 1m

Flat electric cable

Flat electric wire red black 2 wires 1.5 mm² length 1m

EFACSTP035-1.5-1m

€2.50

Flat electric wire red black 2 wires 1.5mm² length 1m

Flat electric cable

Flat electrical wire red black 2 wires 1 mm² length 1m

EFACSTP035-1-1m

€1.70

Flat electric wire red black 2 wires 1mm² length 1m

Tube and threaded accessory

Threaded brass tube with spout pitch - length 30mm

DIY177-becs-30mm

€1.70

This threaded galvanised steel tube is ideal for restoring old luminaires.

Tube and threaded accessory

Threaded brass tube with spout pitch - length 50mm

DIY177-becs-50mm

€2.53

This threaded brass tube is reserved for restoring old light fittings.

Tube and threaded accessory

Threaded brass tube with spout pitch - length 40mm

DIY177-becs-40mm

€2.04

This threaded brass tube is reserved for restoring old light fittings.

Tube and threaded accessory

Threaded tube in zinc-plated steel with spout pitch - length 30mm

DIY178-becs-30mm

€0.70

This threaded galvanised steel tube is ideal for restoring old luminaires.

Tube and threaded accessory

Threaded brass tube with spout pitch - 20mm long

DIY177-becs-20mm

€1.19

This threaded brass tube is reserved for restoring old light fittings.

Tube and threaded accessory

Brass hexagonal nut for threaded tube with 10.85 mm diameter spouts at 1.33 mm pitch

Ecrou-laiton-pas-des-bec

€0.70

These brass nuts tapped to the spout pitch are reserved for restoring old light fittings.

Tube and threaded accessory

Threaded brass tube with spout pitch - length 15mm

DIY177-becs-15mm

€0.89

This threaded brass tube is reserved for restoring old light fittings.

E27 adjustable male and female extension socket, length 380 mm

Sockets, multipliers, risers, adapter sockets

E27 male and female swivel extension socket, length 280 mm

E27-rallonge-280mm

€6.50

This adjustable male and female E27 extension lead can easily be fitted to your installations, allowing you to adjust and offset your lighting as required, length 280 mm.

Ring, hook, ball joint and spring

Fixing bracket for luminaire mounted on M12 threaded rod - Length 64mm

Pont-m12-64mm

€2.95

Luminaire fixing bracket with M12 thread

Lampholder and base

Brass rosette - mounting kit for luminaire or other decorative structure - Ø 42 to 52mm

DIY171C01370026

€19.20

The perfect fixing kit for creators of luminaires on glass or any other self-made suspended structure.

Spherical LED bulbs

E14 flame bulb red light colour 230 volts 1Watt

deco-rouge-flamme-E14

€3.14

For enchanting Christmas illumination, 100% decorative coloured light distribution with very low power consumption, just 1 watt.

2x0.3mm electrical cable on transparent Teflon

Round electric cable

Round electrical cable with two 2x1.5mm² conductors on transparent PVC sheath and...

cable-PVC-teflon-2x-1.5mm

€6.71

Transparent two-core electrical cable with 1.5 mm² wires - length in 1 metre variations

Electrical cable on transparent sheath

Round electrical cable with two 2x1mm² conductors on transparent PVC sheath and...

cable-PVC-teflon-2x-1mm

€5.94

Transparent two-core electrical cable with 1mm² wires - length in one-metre variations

Suspension ring machined brass M20 * 1.5mm thread

Ring, hook, ball joint and spring

Brass suspension ring machined from solid M20 thread, 1.5 mm pitch

DIY089-218008-M20-1.5

€9.90

M20 brass threaded ring for fixing lamp sockets or luminaires

Tools and assembly accessories

Short metric straight fluted tap in HSS steel - standard or fine pitch depending on the...

Taraud-HSS

€13.05

Metric fine thread tap, HSS, for electric threaded pipe - size according to variant any size

Adjustable left-hand turn for taps M1 to M10 size 1

Out-of-Stock

Tools and assembly accessories

Adjustable left-hand turn for taps from M5 to M20 size 3 aluminium body with two steel...

Tourne-à-gauche-n3

€26.90

Tap holder - left-hand turn size N3 with removable handles

View

Tools and assembly accessories

Adjustable left-hand turn for taps from M4 to M12 size 2 aluminium body with two steel...

Tourne-à-gauche-n2

€14.90

Tap holder - left-hand turn size N2 with removable handles

Tools and assembly accessories

Adjustable left-hand turn for taps from M1 to M10 size 1 aluminium body with two steel...

Tourne-à-gauche-n1

€5.90

Left-hand tap holder size M1 with removable handles

Showing 385-432 of 2873 item(s)