A 24 volt DC LED strip 17 mm wide, it can be combined with 5050 RGB LEDs to create a multicoloured lighting ambience, and with another 5050 classic LED strip for traditional warm white lighting.
A translucent resin is installed on this LED strip, making it waterproof (IP65 standard) for use indoors, but also outdoors, provided the strip is protected from splashing water.
This made-to-measureRGB-W LED strip is equipped with two LED types, assembled in two rows next to each other to ensure uniform colours.
It can be used as a main source of lighting but also as a decorative or festive element thanks to its multitude of functions that you can change from your RGB-W controller.
If you're using this LED Strip as your main light source, you'll want to use it indirectly for comfortable, glare-free lighting, for example as a cove around the edge of your ceiling or on the edge of a suspended island in the centre of the room. You'll also be able to decorate and create an atmosphere in your shop windows, highlighting shelves, under a bar counter, on your terrace, banisters and stair treads etc...
You can cut and connect your LED Strip very easily! Just use a pair of scissors to cut every 12 LEDs, i.e. every 10 cm.
The LED Strip is sold on its own , which means you can choose your power supply, lighting management system and any other elements you need to install your LED ribbon to suit your requirements. These are available in the LED Strip accessories section and in part at the bottom of the product sheet.
Product description :
Number of LEDs: 120 LEDs - 60 RGB and 60 Warm White
Light colour: RGB + Warm White
Diffusion angle: over 150
Lifespan: 50,000 hours
Luminous flux: 1020 lumens/metre
Power consumption: 12 watts/metre
Ribbon dimensions: Custom length; 17 mm wide; 4 mm thick
Circuit board: 5 tracks
Pin spacing: 2.8 mm
Voltage: 24 volts DC
Safety assurance: CE & ROHS
