Lighting and lighting design

All the materials you need to create a new light fitting or restore an old chandelier. Sockets, screws, lamps, horns, etc.

Whether for private individuals or professionals, this category of products will enable you to embellish your home with made-to-measure lighting.

Chain, cable, rope, ball and pendant

Dummy candle

Brass and bronze creation for luminaire

Lampholder and base

Tube and threaded accessory

Glassware, stoneware, designer lighting

LED filament bulb

Adapter sleeve

Electrical socket and switch

Rosette, bell, claw and socket cover

Electrical cable, Protective sheath

Lamp and luminaire support

Nut and washer

Cable clamp, cable fastener, screws, interlock button

Ring, hook, ball joint and spring

The antique dealers' corner

Tube and threaded accessory

copy of Brass hexagon nut for M10 threaded tube, 1mm pitch

Ecrou-laiton-M10-e2mm

€0.40

Low brass nuts are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

Lamp and luminaire support

Feutrine le protection autocollante - dessous de lampe

DIY228

€0.35

Tube and threaded accessory

copy of Zamac serrated nut for M20.8mm threaded ring with 2mm pitch

écrou-bague-large-M20,8

€1.50

Zamac serrated nut for assembling luminaires and lighting fixtures mounted on G9 or G4 lampholders.

Lamp and luminaire support

copy of Brass bracket for wall-mounting a luminaire - E14 lampholder

Equerre-laiton-M10

€11.50

Brass bracket for wall mounting a luminaire or E14 lampholder

Tube and threaded accessory

copy of Double elbow gooseneck brass tube - length 23cm M10 threaded

DIY230-NX

€18.90

Double elbow gooseneck brass tube for fixing lamp holders to luminaires.

Tube and threaded accessory

copy of Double elbow gooseneck brass tube - length 23cm M10 threaded

DIY236-HRWG0606

€19.90

Double elbow gooseneck brass tube for fixing lamp holders to luminaires.

Tube and threaded accessory

copy of Double elbow gooseneck brass tube - length 23cm M10 threaded

DIY233-NX

€16.90

Double elbow gooseneck brass tube for fixing lamp holders to luminaires.

Tube and threaded accessory

copy of 90° gooseneck brass tube - length 22.5cm / 9.5cm threaded M10 on spigot collar

DIY231-NX

€14.50

Double elbow gooseneck brass tube for fixing lamp holders to luminaires.

Tube and threaded accessory

copy of 90° gooseneck brass tube - length 22.5cm / 9.5cm threaded M10 on spigot collar

DIY235-NX

€9.85

Double elbow gooseneck brass tube for fixing lamp holders to luminaires.

Tube and threaded accessory

copy of Double elbow gooseneck brass tube - length 23cm M10 threaded

DIY232-NX

€14.50

Double elbow gooseneck brass tube for fixing lamp holders to luminaires.

Tube and threaded accessory

copy of 90° gooseneck brass tube - length 22.5cm / 9.5cm threaded M10 on spigot collar

DIY234-NX

€7.95

Double elbow gooseneck brass tube for fixing lamp holders to luminaires.

Tube and threaded accessory

copy of Double elbow gooseneck brass tube - length 23cm M10 threaded

DIY229-NX

€13.90

Double elbow gooseneck brass tube for fixing lamp holders to luminaires.

White chrome-coated stainless steel half sphere

Out-of-Stock

Column, tube, ball, luminaire tip, suspension ring

Half sphere in stainless steel with white chrome coating - size according to selected...

DIY227-DS-blanc

€7.63

Embrace modern elegance with our stainless steel creations in white chrome half sphere finish.

View

Half sphere in stainless steel with gold chrome coating

Column, tube, ball, luminaire tip, suspension ring

Chrome-gold-coated stainless steel half sphere - size depending on model chosen

DIY227-DS-OR

€7.63

Discover elegance and modernity with our stainless steel creations, sublimated by a gold chrome coating, designed in the shape of a half sphere.

Column, tube, ball, luminaire tip, suspension ring

Half-sphere in hand-crafted brass, charm and character - size according to chosen version

Demi-sphère-laiton

€10.38

Brass half sphere made using the traditional technique of metal spinning.

Column, tube, ball, luminaire tip, suspension ring

Brass tube 25mm outside diameter and 22mm inside diameter - length depending on variation

Tube-laiton-Ø25mm-

€5.20

Brass tube for fixing lamp holders, length depending on declination.

Column, tube, ball, luminaire tip, suspension ring

Brass tube with 20mm outer diameter and 17mm inner diameter - length depending on...

Tube-laiton-Ø20mm-

€4.20

Brass tube for fixing lamp sockets, length depending on declination.

Column, tube, ball, luminaire tip, suspension ring

Brass tube with 16mm outer diameter and 12.8mm inner diameter - length depending on...

Tube-laiton-Ø16mm-

€3.25

Brass tube for fixing lamp sockets, length depending on declination.

Column, tube, ball, luminaire tip, suspension ring

Brass tube 14mm outside diameter and 10.5mm inside diameter - length depending on...

Tube-laiton-Ø14mm-

€3.00

Brass tube for fixing lamp sockets, length depending on declination.

Lamp cord with switch

230 volt power cord with switch - black fabric braid

Cordon-inter-230v-noir

€16.50

Cable for luminaire power supply with push-button switch

Out-of-Stock

Lamp cord with switch

110 volt power cord with switch - black / white Zig Zag braided fabric - for the US...

Cordon-alim-110v-noir-blanc

€16.50

Cable for luminaire power supply with push-button switch

View

Lamp cord with switch

110-volt power cord with switch - black fabric braid - for the US market only

Cordon-alim-110v-noir

€16.50

Cable for luminaire power supply with push-button switch

Lamp cord with switch

110 volt power cord with switch - brown fabric braid - for the US market only

Cordon-alim-110v-marron

€16.50

Cable for luminaire power supply with push-button switch

Brass and bronze creation for luminaire

Small leaf-shaped brass luminaire reflector with lobed edge

réflecteur-lobé-petit

€49.90

This reflector is designed to give the light a preferred direction

Support - lampholder cover with brass collar for E14 lamp base - Ø 28.8mm

Socket, socket cover, spool, dummy plug, cable clamp

Brass lampholder holder with collar for E14 / E12 lamp bases - Ø 28.8mm

HRB03-E14/E12-Ø 28.8mm

€15.90

This small brass holder holds E14 porcelain lampholders.

Socket, socket cover, spool, dummy plug, cable clamp

Support - lampholder cover with brass collar for G9 lamp base - Ø 19.4mm

HRG02-G9-Ø 19.4mm

€12.90

This small metal holder holds G9 porcelain lampholders.

Sockets, multipliers, risers, adapter sockets

Support - G9 porcelain socket cover on claw with M10 tapping

Cache-douille-griffe-G9

€2.50

This small metal holder holds G9 porcelain lampholders.

Out-of-Stock

Brass and bronze creation for luminaire

Zia electrical cable clamp in brass - silicone cable lock - M10 thread, 1mm pitch

DIY208-Zia

€4.90

Zia brass electrical cable clamp for lamp socket or ceiling rose cable lock with silicone cone

View

Out-of-Stock

Brass and bronze creation for luminaire

Livio brass electric cable clamp - silicone cable lock - M10 thread, 1mm pitch

DIY208-Livio

€4.90

Livio brass electrical cable clamp for lamp socket or ceiling rose cable clamp with silicone cone

View

Out-of-Stock

Brass and bronze creation for luminaire

Naïs electric cable clamp in brass - silicone cable lock - M10 thread, 1mm pitch

DIY207-Naïs

€4.75

Naïs brass electrical cable clamp for lampholder or ceiling rose cable clamp with silicone cone

View

Lampholder and base

Ethan lampholder in solid brass with G9, E12 or E14 base, depending on version

DIY114233083-Ethan

€9.90

E12, E14 or G9 lampholder in Ethan brass for a resolutely neo-retro style, ideal for Edison-style incandescent or LED filament lamps,

Out-of-Stock

Sockets, multipliers, risers, adapter sockets

G9 porcelain base support on claw with M10 tapping

culot-griffe-G9

€2.10

This small metal holder holds G9 porcelain lampholders.

View

Out-of-Stock

Sockets, multipliers, risers, adapter sockets

G4 brass M10 lamp holder with ball head - Thread length depending on declination.

support G4 tête boule 202006

€3.00

This small brass lamp holder makes it easy to install small light sources in G4 format.

View

Tube and threaded accessory

White polyurethane end cap for cable entry

embout-poly-blanc

€0.22

White polyurethane end cap to protect electrical cables.

Tube and threaded accessory

Black polyurethane end cap for cable entry

embout-poly-noir

€0.22

Black polyurethane end cap to protect electrical cables.

Out-of-Stock

Lampholder and base

E26 Lynch lampholder in solid brass with natural or satin finish - non-European market

UL-E26-lynch-laiton-court

€18.90

E26 lampholder in vintage brass, for a resolutely neo-retro style, ideal for Edison-style incandescent or LED filament lamps,

View

Lampholder and base

Lynch E26 lampholder in aged brass - non-European market

UL-E26-lynch-vieilli-court

€21.00

E26 lampholder in aged brass, for a resolutely neo-retro style, ideal for Edison-style incandescent or LED filament lamps,

Tube and threaded accessory

Solid brass tubular body for chandeliers, suspension - height 40mm Ø 26mm

Clarinette-40*26

€10.40

A decorative brass element for assembling luminaires, it allows the construction of a hollow luminaire body.

Out-of-Stock

Lampholder and base

Lynch E27 lamp holder in aged brass - short threaded

DIY233121-E27-lynch-vieilli-court

€21.00

E27 lampholder in aged brass, for a resolutely neo-retro style, ideal for Edison-style incandescent or LED filament lamps,

View

Out-of-Stock

Brass and bronze creation for luminaire

Tytia electric cable clamp in brass - silicone cable lock - M10 thread, 1mm pitch

DIY188-SC-Tytia

€2.95

Tytia brass electrical cable clamp for lamp socket or ceiling rose cable clamp with silicone cone

View

Lampholder and base

E27 Aaron socket in machined solid brass for Edison-style lamp with short thread

DIY233-01350239-Aaron

€18.90

E27 socket in vintage brass, for a resolutely neo-retro style, ideal for Edison-style incandescent or LED filament lamps,

Natural white fake chandelier candle 100mm

Lighting and lighting design

Dummy candle D22 for chandelier natural white colour length 100mm

bougie-blanc naturel-100-D24

€1.20

D22 faux candle sleeve in natural white with imitation candle wax drippings.

Dummy candle D24 for chandelier natural black colour length 100mm

Lighting and lighting design

Dummy candle D22 for chandelier colour black length 100mm

bougie-noir-100-D22

€1.20

Natural black faux candle sleeve with imitation candle wax drippings.

Ring, hook, ball joint and spring

Chrome-plated steel M10 male/male ball joint, one joint for threaded tube

Rotule-acier-m/m-chrome

€2.60

Chrome-plated steel ball joint with M10 male thread for assembly on hollow polishing rods

Maia brass feeder - 2 vertical outlets 4 horizontal M10

Rosette, bell, claw and socket cover

Maia brass feeder - connection box - 2 vertical outlets 4 horizontal M10

Maia-2+4

€17.50

Maia brass feeder for fixing a lampshade or light fitting

Rosette, bell, claw and socket cover

Elara brass feeder - connection box - 2 vertical outlets 3 horizontal M10

Elara-2+3

€17.50

Elara brass feeder for fixing a lampshade or light fitting

Clytia brass feeder - 2 vertical outlets 4 horizontal M10

Rosette, bell, claw and socket cover

Clytia brass feeder - connection box - 2 vertical outlets 4 horizontal M10

Clytia-2+4

€17.50

Clytia brass nipple for fixing a lampshade or light fitting

Thalia brass feeder - 2 vertical outlets 3 horizontal M10

Rosette, bell, claw and socket cover

Thalia brass feeder - connection box - 2 vertical outlets 3 horizontal M10

Thalia-2+3

€17.50

Thalia brass feeder for fixing a lampshade or light fitting

Round electric cable

Crimping pliers for sleeve on load-bearing steel cable - stop sleeve on loop

Pince-manchon

€39.50

Crimping pliers for aluminium and brass sleeves

Rosette, bell, claw and socket cover

Brass washer - Damped clamping device for fragile luminaire bases - Ø Depends on version

Rond-laiton-amorti

€3.50

Our domed brass washer, tapped in the centre, is ideal for sturdy and attractive mounting on your luminaires.

Tube and threaded accessory

M10 brass tube with threaded ends - Tube length available in five variations

Tube-laiton-M10

€3.36

Threaded brass tube for fixing lamp sockets - Available in five lengths

Lampholder and base

E27 ceiling lampholder in enamelled porcelain, base inclined at 30°. high gloss in black

E27-porcelaine-noir-base-30

€21.20

E27 lampholder in black gloss enamelled porcelain for a resolutely neo-retro style.

Lampholder and base

E27 ceiling lampholder in enamelled porcelain, base inclined at 30°. high gloss in white

E27-porcelaine-blanc-base-30

€21.20

E27 lampholder in white gloss enamelled porcelain for a resolutely neo-retro style.

Lampholder and base

E27 ceiling lampholder in white gloss porcelain enamel

E27-porcelaine-blanc-base

€21.20

E27 lampholder in white gloss enamelled porcelain for a resolutely neo-retro style.

Lampholder and base

E27 ceiling lampholder in black gloss porcelain enamel

E27-porcelaine-noir-base

€21.20

E27 lampholder in black gloss enamelled porcelain for a resolutely neo-retro style.

Round electric cable

White braided round textile cable - with earth 3x0.75mm²

cable-rond-blanc-3x0.75mm

€4.90

White round textile cable PVC sheath with three 0.75mm² conductors

Threaded tube in stainless steel 304 diameter M10 - length from 1 to 10 cm depending on the version

Tube and threaded accessory

Threaded tube in 304 stainless steel, diameter M12 - length from 2 to 5 cm, depending...

Tube-M12-inox

€1.44

Standard M12 threaded tube with 1mm pitch - choose the length you need from the range.

Twisted textile sheathed electrical cable, intense chocolate colour - two 2 x 0.75mm conductors

Twisted electrical cable

Electrical cable twisted textile sheath, intense chocolate colour - two 2 x 0.75mm²...

cable-2x-0.75mm-chocolat-intense

€4.85

Intense chocolate-coloured two-core twisted cable with 0.75 mm² wires - length in one metre variations

Twisted electrical cable

Chocolate brown twisted textile sheath electrical cable - two 2 x 0.75mm² conductors on...

cable-2x-0.75mm-brun-choco

€4.85

Chocolate brown twisted pair electric cable with 0.75 mm² wires - length in metre variations

Round electric cable

PVC-sheathed round textile cable 2x0.5mm² - Copper-coloured braid

cable-rond-cuivre-2x0.5mm

€4.00

PVC-sheathed round textile cable with two 0.5mm² conductors - length in one-metre variations

Round electric cable

Brass crimping sleeve for load-bearing steel cable - one loop stop sleeve

Manchon-laiton

€0.20

Form a loop at one end of the electrical cable with its supporting steel cable.

Round electric cable

Aluminium crimping sleeve for load-bearing steel cable - one stop sleeve on loop

Manchon-aluminium

€0.10

Form a loop at one end of the electrical cable with its supporting steel cable.

Round electric cable

Round cable with copper-coloured fabric braid - Teflon sheath 2x0.75mm² with carrying rope

cable-porteur-2x0.75+1-cuivre

€4.20

Two-wire electrical cable, with 0.75mm² wires plus suspension cable - length in one-metre variations

Round electric cable

White braided round cable - Teflon sheath 2x0.75mm² with suspension cable

cable-porteur-2x0.75+1-blanc

€4.20

Two-wire electrical cable, with 0.75mm² wires plus suspension cable - length in one-metre variations

Tube and threaded accessory

Telescopic brass tube with 180° cross for luminaire mounted on M10 threaded tube

DIY-HTSSG04T-36CM

€52.60

Telescopic brass tube with 180° cross - M10 thread for assembling luminaires on hollow rods

M5 transparent plastic screw, headless, length 8mm

Cable clamp, cable fastener, screws, interlock button

M5 transparent plastic screw, headless, length 10mm sold in packs of 10, 100 or 1000...

vis-trans-M5-10mm

€0.66

Headless plastic screws for socket glands.

Tube and threaded accessory

Telescopic brass tube with 90° cross for luminaire mounted on M10 threaded tube

Tube-telescopique-laiton-DIY162

€41.94

Telescopic brass tube with 90° cross - M10 thread for assembling luminaires on hollow rods

Lamp and luminaire support

Silicone protection washer for M4 screw, external diameter 9mm

Rondelle-silicone-M4

€0.10

Transparent silicone washers to reduce vibration and absorb shock.

Lamp and luminaire support

Silicone protection washer for M5 screws 10mm external diameter

Rondelle-silicone-M5

€0.12

Transparent silicone washers to reduce vibration and absorb shock.

Lighting and lighting design

Brass clevis bracket for ball link chain - diameter depending on version

Fixation chape-laiton

€1.20

Brass fixing clevis for ball link chain - diameter depending on version for hanging or fixing small objects.

Lighting and lighting design

Chrome-plated stainless steel fasteners for ball link chain - choice of diameters

fermoir-chaine-inox

€0.18

These chrome-style stainless steel clasps can be used to link two chains together or to create an initial hanging point.

Lighting and lighting design

Brass end caps for ball link chain - choice of diameters

fermoir-chaine-laiton

€0.18

These brass clasps can be used to link two chains together or to create an initial hanging point.

Lighting and lighting design

3.2mm diameter brass ball chain - sold by the linear metre

chaine-metre-laiton-3.2mm

€2.10

3.2 mm diameter brass ball chain for hanging or securing small objects.

Lighting and lighting design

4.5mm diameter brass ball chain - sold by the linear metre

chaine-metre-laiton-4.5mm

€3.20

4.5 mm diameter brass ball chain for hanging or securing small objects.

Lighting and lighting design

6mm diameter brass ball chain - sold by the linear metre

chaine-metre-laiton-6mm

€5.20

6 mm diameter brass ball chain for hanging or securing small objects.

M10 threaded brass G4 lamp holder with knurled chrome head

Out-of-Stock

Sockets, multipliers, risers, adapter sockets

M10 threaded brass G4 lamp holder with knurled chrome head

support lampe G4 court

€4.30

This small brass lamp holder makes it easy to install small light sources in G4 format.

View

Column, tube, ball, luminaire tip, suspension ring

Steel hinge pin with brass ball, traditional style

Gond-axe

€7.20

Traditional steel and brass window hinge

Column, tube, ball, luminaire tip, suspension ring

Brass ball, diameter 13mm, M6 thread, 1mm pitch, non-through hole

boule-M6-Ø13mm

€2.90

13 mm diameter brass ball with M6 thread, ideal for assembling luminaires.

Tube and threaded accessory

M10 threaded tube in galvanised steel Ø5mm radial bore - 12cm long

M10-L12cm-perçage-radial

€1.48

Hollow threaded rod sold individually in M10 standard with 1mm fine pitch

Lamp and luminaire support

Brass bracket for wall-mounting a luminaire - E14 lampholder

Equerre-laiton-E14

€11.50

Brass bracket for wall mounting a luminaire or E14 lampholder

Brass and bronze creation for luminaire

Kory chrome electric cable clamp - silicon cable lock - M10 thread, 1mm pitch

DIY208-Kory-chrome

€3.80

Kory brass electrical cable clamp for lamp socket or ceiling rose cable clamp with silicone cone

Out-of-Stock

Brass and bronze creation for luminaire

Kiara chrome electric cable clamp - silicon cable lock - M10 thread, 1mm pitch

DIY210-kiara-chrome

€3.80

Kiara chrome-plated brass electrical cable clamp for lamp socket or ceiling rose cable clamp with silicone cone

View

Out-of-Stock

Brass and bronze creation for luminaire

Clover chrome electric cable clamp - silicon cable lock - M10 thread, 1mm pitch

DIY210-Clover-chrome

€3.80

Clover chrome-plated brass electrical cable clamp for lamp socket or ceiling rose cable clamp with silicone cone

View

Rotary pushbutton switch - single pole 3A - 230v - Ø 10 threaded head - choice of colours

Electrical socket and switch

Rotary pushbutton switch - single pole 3A - 250V - mounted on Ø 10 threaded head -...

Interrupteur-bouton-rotatif-3A

€4.95

Rotary switch for switching on a lamp - 3 colours to choose from.

Round braided cable, Caramelline colour - Teflon sheath with carrying rope

Round electric cable

Round braided cable, Caramelline colour - Teflon sheath 2x0.75mm² with support wire

cable-porteur-2x0.75+1-Caramelline

€4.20

Two-wire electrical cable, with 0.75mm² wires plus suspension cable - length in one-metre variations

Round electric cable

Silver-coloured braided round cable - Teflon sheath 2x0.75mm² with suspension cable

cable-porteur-2x0.75+1-silver

€4.20

Two-wire electrical cable, with 0.75mm² wires plus suspension cable - length in one-metre variations

Round electric cable

Round brass-coloured braided cable - Teflon sheath 2x0.75mm² with carrying rope

cable-porteur-2x0.75+1-laiton

€4.20

Two-wire electrical cable, with 0.75mm² wires plus suspension cable - length in one-metre variations

Round electric cable

Linen-coloured braided round cable - Teflon sheath 2x0.75mm² with carrying rope

cable-porteur-2x0.75+1-lin

€4.20

Two-wire electrical cable, with 0.75mm² wires plus suspension cable - length in one-metre variations

Round electric cable

Black braided round cable - Teflon sheath 2x0.75mm² with suspension cable

cable-porteur-2x0.75+1-noir

€4.20

Two-wire electrical cable, with 0.75mm² wires plus suspension cable - length in one-metre variations

Round electric cable

Round chestnut brown braided cable - Teflon sheath 2x0.75mm² with suspension cable

cable-porteur-2x0.75+1-chataigne

€4.20

Two-wire electrical cable, with 0.75mm² wires plus suspension cable - length in one-metre variations

Lampholder and base

E27 Amélia brass lampholder - XL size

Douille-E27-Amélia-laiton

€58.90

E27 Amélia brass lampholder, for a resolutely neo-retro style, ideal for Edison-style incandescent or LED filament lamps.

LED bulbs

Chant-viron flame lamp with E12 base - Voltage 110 volts dimmable satin glass

Candel-E12 -110v - Chant-viron

€12.00

Small LED filament lamp with E12 base, full spectrum, CRI 90.7 Ra, in the shape of a candle flame, reserved for the American market and other countries using 110 volts.

LED bulbs

Chant-viron flame lamp with E12 base - 230 volts dimmable satin glass

Candel-E12 -230v - Chant-viron

€12.00

Small LED filament lamp with E12 base, full spectrum, CRI 90.7 Ra, in the shape of a candle flame.

Brass and bronze creation for luminaire

Carly chrome electric cable clamp - silicon cable lock - M10 thread, 1mm pitch

DIY188-SC-Carly-chrome

€3.70

Carly chrome electric cable clamp for lamp socket or ceiling rose cable clamp with silicone cone

Lampholder and base

E27 Theena white chrome lampholder - XL size

Douille-E27-Thélena-chrome-blanc

€19.50

E27 Thelena lampholder in white chromed aluminium, for a resolutely neo-retro style, ideal for Edison-style incandescent or LED filament lamps.

Lampholder and base

E27 Amélia lamp holder in white chrome finish - XL size

Douille-E27-Amélia-chrome-blanc

€28.90

Amélia E27 lampholder in white chromed aluminium, for a resolutely neo-retro style, ideal for Edison-style incandescent or LED filament lamps.

Lampholder and base

E27 Kézia lamp holder in solid brass - XL size

Douille-E27-Kézia-laiton

€41.75

An E27 brass lampholder for a resolutely neo-retro style, Kézia is ideal for Edison-style incandescent or LED filament lamps.

Lampholder and base

E27 Kézia lamp holder in white chrome finish - XL size

Douille-E27-Kézia-chrome-blanc

€26.00

An E27 lampholder in white chromed aluminium for a resolutely neo-retro style, Kézia is ideal for Edison-style incandescent or LED filament lamps.

E27 Lynch chrome white short thread socket

Lampholder and base

E27 Lynch socket in white chrome brass for Edison-style lamp with short thread

DIY233121-E27-lynch-chrome-court

€19.50

E27 lampholder in white chromed brass, for a resolutely neo-retro style, ideal for Edison-style incandescent or LED filament lamps,

Sockets, multipliers, risers, adapter sockets

Plastic base for G9 lamp with M20.8 thread - two Grip-connect

culot-G9-PL-2G

€2.50

PET cap for G9 lamp with M20.8 thread - Grip-connect for LED bulbs

2x0.3mm electrical cable on transparent Teflon with stainless steel support cable

Electrical cable on transparent sheath

Round electrical cable 2x0.2mm² on transparent Teflon with stainless steel support cable

cable-porteur-2x-0.2mm+1-TP

€2.90

Two-wire electrical cable, with 0.2mm² wires plus suspension cable - length in one-metre variations

Fixing bracket for luminaire mounted on M10 or M12 threaded rod - Length 110mm

Ring, hook, ball joint and spring

Fixing bracket for luminaire mounted on M10 threaded rod - Length 120mm

Pont-diamètre-10-120mm

€3.70

Luminaire fixing bracket for M10 threaded tube

Tools and assembly accessories

Threaded tube in 304 L stainless steel - M6 with 1mm pitch - 1 metre long

DIY-066-inox-M6-1m

€24.90

Hollow stainless steel threaded rod sold individually in M6 standard with 1mm fine pitch for fixing bulb sockets.

Hafsa electric cable clamp in brass - silicone cable lock

Out-of-Stock

Brass and bronze creation for luminaire

Hafsa electric cable clamp in brass - silicone cable lock - M10 thread, 1mm pitch

DIY208-Hafsa

€4.90

Hafsa brass electrical cable clamp for lampholder or ceiling rose cable clamp with silicone cone

View

Brass and bronze creation for luminaire

Kory electric cable clamp in brass - silicone cable lock - M10 thread, 1mm pitch

DIY208-Kory

€3.20

Kory brass electrical cable clamp for lamp socket or ceiling rose cable clamp with silicone cone

Rosette, bell, claw and socket cover

Aluminium rose Ø 110 to 140mm - mounting kit for glass luminaire or other suspended...

Rosace-alu-110-140

€23.50

This fixing kit is ideal for designers of light fittings on glassware or any other suspended structure that you make yourself.

Out-of-Stock

Brass and bronze creation for luminaire

Jade electric cable clamp in brass - silicone cable lock - M10 thread, 1mm pitch

DIY208-Jade

€4.90

Jade brass electrical cable clamp for lamp socket or ceiling rose cable clamp with silicone cone

View

Cyra electric cable clamp in brass - silicon cable lock - M10 thread

Out-of-Stock

Brass and bronze creation for luminaire

Cyra electric cable clamp in brass - silicon cable lock - M10 thread, 1mm pitch

DIY208-Cyra

€4.90

Cyra brass electrical cable clamp for lamp socket or ceiling rose cable clamp with silicone cone

View

Out-of-Stock

Brass and bronze creation for luminaire

Jaina electric cable clamp in brass - silicone cable lock - M10 thread, 1mm pitch

DIY208-Jaina

€4.90

Jaina brass electrical cable clamp for lampholder or ceiling rose cable clamp with silicone cone

View

Azura electric cable clamp in brass - silicon cable lock - M10 thread

Out-of-Stock

Brass and bronze creation for luminaire

Azura electric cable clamp in brass - silicon cable lock - M10 thread, 1mm pitch

DIY208-Azura

€4.90

Azura brass electrical cable clamp for lamp socket or ceiling rose cable clamp with silicone cone

View

Cable clamp, cable fastener, screws, interlock button

M5 brass screw with domed slotted head, thread length 13mm

Vis-laiton-TBF-M5-13

€1.70

Brass screw diameter 5mm with domed slotted head with recess for flat screwdriver

Tube and threaded accessory

Zinadia brass luminaire tip diameter 42mm height 48mm M10 threaded

pointe-Zinadia

€10.95

A decorative element for assembling M10 brass luminaires and chandeliers.

Tube and threaded accessory

Olina brass luminaire tip diameter 26mm height 73mm threaded M10

pointe-Olina

€9.90

A decorative element for assembling M10 brass luminaires and chandeliers.

Tube and threaded accessory

Esther brass light point diameter 25mm height 26mm tapped M10

pointe-Esther

€5.90

A decorative element for assembling M10 brass luminaires and chandeliers.

Tube and threaded accessory

Abigail brass light point diameter 38mm height 30mm threaded M10

pointe-Abigail

€9.96

A decorative element for assembling M10 brass luminaires and chandeliers.

Ring, hook, ball joint and spring

Yaros suspension ring in cast brass 31mm wide M10 thread

Anneau-Yaros-M10

€12.20

M10 brass Yaros ring with 1mm thread for mounting luminaires

Ring, hook, ball joint and spring

Odalys suspension ring in cast brass with 3/4" threaded ring - M10 tapping

Anneau-Odalys-3/4"-M10

€10.50

Odalys brass ring with 3/4 inch M12 threaded ring in 1mm pitch for mounting luminaires

Ring, hook, ball joint and spring

Octavie suspension ring in cast brass with M30 threaded ring - M12 tapping

Anneau-Octavie-M30-M12

€13.20

Octavie ring in brass with M30 threaded ring tapped M12 in 1mm increments for fixing luminaires

Ring, hook, ball joint and spring

Loulia suspension hook in cast brass 27mm wide with M10 thread

Anneau-Loulia-M10

€4.90

Loulia hook in brass with M10 thread in 1mm pitch for fixing luminaires

Eléni suspension ring in cast brass 30mm wide M10 thread

Ring, hook, ball joint and spring

Eléni suspension ring in cast brass, 30mm wide, M10 tapping

Anneau-Éléni-M10

€6.90

Eléni brass ring with M10 thread in 1mm pitch for mounting luminaires

Ring, hook, ball joint and spring

Daria suspension ring in cast brass diameter 31mm M12 thread

Anneau-Daria-M12

€6.00

M12 brass Daria ring with 1mm thread for mounting luminaires

Ring, hook, ball joint and spring

Daria suspension ring in cast brass 31mm diameter M10 thread

Anneau-Daria-M10

€6.00

M10 brass Daria ring with 1mm thread for mounting luminaires

Cable clamp, cable fastener, screws, interlock button

Brass screw M4 with large domed head - cross recess - thread length 25mm

vis-laiton-m4L-25-cruci

€0.28

Brass screw diameter 3mm with domed head and recess for Phillips screwdriver

Column, tube, ball, luminaire tip, suspension ring

Mya ribbed brass knob diameter 22mm - M4 non-through threaded

Bouton-Mya

€6.00

Brass knob with ribbed finish

Column, tube, ball, luminaire tip, suspension ring

Aya ribbed brass ball 30mm diameter - M4 non-through threaded

Boule-Aya

€22.00

Aya ball in ribbed-finish brass, diameter to suit design.

E26 porcelain socket on M10 American-style hollow threaded rods

Lampholder and base

E26 porcelain socket on M10 "American format" hollow threaded rods

Douille-E26-M10

€3.40

E26 porcelain socket with support for M10 hollow threaded rods

Brass numbers from zero to nine, functional use or personal significance

Out-of-Stock

The antique dealers' corner

Brass number, functional use or personal significance, from zero to nine *according to...

chiffre

€6.40

View

The antique dealers' corner

Calliope pendant knob in brass and natural stone for a piece of furniture or a drawer

Poignée-Calliope

€18.50

Brass double lampholder support for wall lamp

Out-of-Stock

Lamp and luminaire support

Brass double lampholder bracket for superimposed mounting - for wall-mounted lamps

sup-double-douille-laiton

€18.60

View

Out-of-Stock

Lampholder and base

E27 Médéa lamp holder in varnished ash wood with a cuboctahedron shape, combining...

DIY-Médéa-223-NX7878

€22.60

E27 Médéa lamp holder in varnished ash wood for a resolutely neo-retro style, ideal for Edison-style incandescent or LED filament lamps.

View

Lampholder and base

E14 Aspasia screw lampholder in steel with bronze chrome finish

Aspasia-E14 acier chrome bronze

€8.50

Chrome-plated bronze lampholder in a resolutely modern style for use with E14 incandescent or low-energy bases,

Lampholder and base

Aspasia E14 screw lampholder in steel with black chrome finish

Aspasia-E14 acier chrome noir

€8.50

Chrome-plated black lampholder in a resolutely modern style for E14 incandescent or low-energy lamps,

Lampholder and base

Aspasia E14 screw lampholder in steel with brass-coloured chrome finish

Aspasia-acier-laiton-E14

€8.85

Brass-coloured steel lampholder in the style of yesteryear for E14 incandescent or low-energy lamps,

Lampholder and base

Sérémat E27 screw lampholder in steel with brass-coloured chrome finish

Sérémat-acier-laiton-E27

€10.00

Brass-coloured steel lampholder in the style of yesteryear for E27 incandescent or low-energy lamps,

The antique dealers' corner

Brass protector for table corners, furniture, pedestals and cupboards - size 39 x39mm

corner-39x39

€2.90

Brass protector for table corners, furniture, pedestals and cupboards - size 65 x64mm

The antique dealers' corner

Brass protector for table corners, furniture, pedestals and cupboards - size 65 x65mm

corner-65x65

€5.60

The antique dealers' corner

Brass protector for table corners, furniture, pedestals and cupboards - size 56 x56mm

corner-56x56

€5.90

The antique dealers' corner

Brass nail with multi-faceted ball head for fixing a frame or picture - length 78mm

clous-boul-face-78

€6.95

The antique dealers' corner

Brass nail with multi-faceted ball head for fixing a frame or picture - length 103mm

clous-boul-face-103

€10.00

Brass nails with multi-faceted ball head for fixing a frame or picture - length 135mm

The antique dealers' corner

Brass nail with multi-faceted ball head for fixing a frame or picture - length 135mm

clous-boul-face-135

€15.90

The antique dealers' corner

Forged brass nails with angled head for fixing a frame or picture - length 76mm

clous-laiton-76

€4.50

The antique dealers' corner

Forged brass nails with angled head for fixing a frame or picture - length 100mm

clous-laiton-100

€6.50

Forged brass nails with angled heads for fixing frames or pictures

The antique dealers' corner

Forged brass nails with angled head for fixing a frame or picture - length 120mm

clous-laiton-120

€12.95

The antique dealers' corner

Alvina handle in natural brass in the shape of a shell for a cabinet or drawer

Poignée-Alvina-new

€5.20

Antique brass shell-shaped furniture or drawer handle

Out-of-Stock

The antique dealers' corner

Antique brass Alvina handle in the shape of a shell for a cabinet or drawer

Poignée-Alvina-old

€5.20

View

Nut and washer

Stainless steel washer M10 diameter 30mm thickness 2mm - A2

Rondelle-inox-M10-30

€0.65

Out-of-Stock

Lampholder and base

E27 Athenal lamp holder in varnished ash wood with a cubic shape, combining beauty and...

DIY-Athenal-223-NX7878

€22.60

E27 Athenal lamp holder in varnished ash wood for a resolutely neo-retro style, ideal for Edison-style incandescent or LED filament lamps.

View

Maneki E27 cylindrical lampholder in varnished ash wood

Out-of-Stock

Lampholder and base

Maneki E27 lamp holder in varnished ash wood with a cylindrical shape, combining beauty...

DIY-Maneki-223-NX80100

€18.60

Maneki E27 lamp holder in varnished ash wood for a resolutely neo-retro style, ideal for Edison-style incandescent or LED filament lamps.

View

Out-of-Stock

Lampholder and base

E27 Isis lamp holder in varnished ash wood with an ovoid shape, combining beauty and...

DIY-Isis-223-NX5285

€9.60

E27 Isis lamp holder in varnished ash wood for a resolutely neo-retro style, ideal for Edison-style incandescent or LED filament lamps.

View

Out-of-Stock

Lampholder and base

E27 Bastet lamp holder in varnished ash wood with an ovoid shape, combining beauty and...

DIY-Bastet-223-NX6082

€9.40

Bastet E27 lampholder in varnished ash wood for a resolutely neo-retro style, ideal for Edison-style incandescent or LED filament lamps.

View

Round electric cable

Linen-coloured braided round textile cable - with earth 3x0.75mm²

cable-rond-lin-2+T-0.75mm

€4.90

Linen-coloured round textile cable PVC sheath with three 0.75mm² conductors

Lamp cord with switch

230-volt power cord with two-pole flat plug - choice of colour fabric braid

Cordon-alim

€9.95

Lamp and luminaire support

Brass bracket for wall-mounting a luminaire - E27 lampholder

Equerre-laiton-E27

€11.50

Brass bracket for wall mounting a luminaire or E27 lampholder

Connection box - brass feeder - multi-outlet M10

Rosette, bell, claw and socket cover

Orthros brass feeder - connection box - multi-outlet M10

nourrice-orthros

€28.50

Orthros brass feeder for fixing a lampshade or light fitting

M8 diameter 304 stainless steel threaded tube

Tube and threaded accessory

Threaded tube in 304 stainless steel, diameter M8 - length from 1 to 10 cm, depending...

Tube-M8-inox

€1.00

Standard M8 threaded tube with 1.0mm pitch - choose the length you need from the range.

Tube and threaded accessory

Threaded tube in stainless steel 304 diameter M10 - length from 1 to 10 cm depending on...

Tube-M10-inox

€1.30

Standard M10 threaded tube in 1 mm increments - choose the length you need from the range.

Tube and threaded accessory

Brass T-fitting with three M10 threads

Raccord-T-laiton

€14.50

This brass T-fitting with three M10 threads is perfect for assembling luminaires.

Ring, hook, ball joint and spring

M10 male/male steel ball joint, one joint for threaded tube - choice of colours

Rotule-acier-m/m-

€2.60

M10 male threaded steel ball joint for assembly on hollow polishing rods

7.6mm diameter chrome-plated steel tube with M8 thread - length 15mm

Tools and assembly accessories

7.6mm diameter chrome-plated steel tube with M6 thread - length 15mm

DIY-221-tube-chrome-M6-15mm

€0.42

7.6mm diameter chrome-plated tube with M6 thread, 15mm tube length

Tools and assembly accessories

11.3mm diameter chromium-plated steel tube with M10 thread - length to be chosen...

DIY-221-tube-chrome-M10

€0.78

Chrome-plated 11.3 mm diameter tube with M10 thread, tube length according to declination.

Rosette, bell, claw and socket cover

Selena brass suspension claw - internal diameter 104 mm

DIY222-HR4011-Selena

€43.50

Selena suspension claw in brass for fixing a lampshade or light fitting

Rosette, bell, claw and socket cover

Nyx brass suspension claw - internal diameter 57 mm

DIY222-HR0201-Nyx

€11.50

Nyx brass suspension claw for fixing a lampshade or light fitting

Rosette, bell, claw and socket cover

Suspension claw Brass isode - internal diameter 56 mm

DIY222-HR4014-Isode

€35.00

Suspension claw Brass isode for fixing a lampshade or light fitting

Rosette, bell, claw and socket cover

Isla brass suspension claw - internal diameter 61 mm

DIY222-HR4016-Isla

€28.90

Isla suspension claw in brass for fixing a lampshade or light fitting

Out-of-Stock

Rosette, bell, claw and socket cover

Eliana brass suspension claw - internal diameter 83 mm

DIY222-HR4013-Eliana

€35.90

Eliana brass suspension claw for fixing a lampshade or light fitting

View

Rosette, bell, claw and socket cover

Elara brass suspension claw - internal diameter 118 mm

DIY222-HR4015-Elara

€44.50

Elara suspension claw in brass for fixing a lampshade or light fitting

Rosette, bell, claw and socket cover

Amara brass suspension claw - internal diameter 94 mm

DIY222-HR4012-amara

€44.50

Amara brass suspension claw for fixing a lampshade or light fitting

Rosette, bell, claw and socket cover

Aria brass suspension claw - internal diameter 83 mm

DIY222-HR1190-Aria

€48.00

Aria brass suspension claw for fixing a lampshade or light fitting

Tools and assembly accessories

Chromium-plated steel tube, diameter 4.7 mm, M4 threaded - length to be chosen...

Tube-chrome-M4

€0.60

Chrome-plated 4.7 mm diameter tube with M4 thread, tube length according to declination.

Single-core electrical cable with Teflon sheath

Electrical cable with Teflon sheath, conductor cross-section 2.5mm², colour of choice

cable-teflon-1C-2.5

€2.95

PTFE Teflon electric cable with 2.5mm² wires - length in 1 metre variations

Single-core electrical cable with Teflon sheath

Electrical cable with Teflon sheath, conductor cross-section 2mm², colour of choice

cable-teflon-1C-2.0

€2.70

PTFE Teflon electric cable with 2mm² wires - length in 1 metre increments

Single-core electrical cable with Teflon sheath

Electrical cable with Teflon sheath, conductor cross-section 1.5mm², colour of choice

cable-teflon-1C-1.5

€1.95

PTFE Teflon electric cable with 1.5mm² wires - length in metre variations

Single-core electrical cable with Teflon sheath

Electrical cable with Teflon sheath, conductor cross-section 1mm², colour of choice

cable-teflon-1C-1.0

€1.65

PTFE Teflon electric cable with 1mm² wires - length in 1 metre increments

Single-core electrical cable with Teflon sheath

Electrical cable with Teflon sheath, conductor cross-section 0.75mm², choice of colours

cable-teflon-1C-0.75

€1.30

PTFE Teflon electric cable with 0.75mm² wires - length in 1 metre variations

Single-core electrical cable with Teflon sheath

Electrical cable with Teflon sheath, conductor cross-section 0.5mm², colour of choice

cable-teflon-1C-0.5

€0.85

PTFE Teflon electric cable with 0.5mm² wires - length in metre variations

Electrical cable, Protective sheath

Pre-wired electrical earth cable on round cable lug diameter 4mm - length 200mm

DIY218-0.5-T-cosse-M4

€0.75

Electrical cable, Protective sheath

Electrical earth cable pre-wired on round cable lug diameter 10mm - length 210mm

DIY218-cable-T-cosse-M10-0.5

€0.80

cable-electric-earth-cable-on-round-pit-diameter-10mm-L-250-mm

Electrical cable, Protective sheath

pre-wired earth cable on 10mm diameter round lug - length 250mm

DIY218-0.75-T-cosse-M10

€1.00

Cable clamp, cable fastener, screws, interlock button

Round brass terminal - earthing terminal on M10 threaded tube

DIY219-Borne-terre-M10

€0.80

Out-of-Stock

Lamp and luminaire support

Tulipe Shades chrome gold steel wire shade - length 240mm

Tulipe Shades-240

€39.74

View

Out-of-Stock

Lamp and luminaire support

Tulipe Shades chrome gold steel wire shade - length 160mm

Tulipe Shades-160

€36.74

View

Out-of-Stock

Lamp and luminaire support

Lumina luminaire body - openwork cage in gold chrome steel - length 245mm

Lumina-corps-245

€38.75

View

Caris gold chrome openwork luminaire cage - size 122 x 82mm

Lamp and luminaire support

Caris openwork steel wire luminaire cage in chrome gold - size 122 x 82mm

Caris-122x82

€12.50

Lamp and luminaire support

Lattice lighting ball - openwork cage in gold chrome steel - diameter 82mm

Lattice-boule-82

€12.50

Lamp and luminaire support

Lattice luminaire body - openwork cage in chrome-gold steel - length 400mm

Lattice-corps-400

€38.50

Lamp and luminaire support

Lattice luminaire body - openwork cage in chrome-gold steel - length 250mm

Lattice-corps-250

€28.50

Flat textile cable with Teflon and PVC sheath 2x0.5mm² - Silver braid

Flat electric cable

Flat textile cable with Teflon and PVC sheath 2x0.75mm² - Silver braid

cable-plat-argent-2x0.75mm

€4.80

Flat textile cable with PTFE and PVC sheath with two 0.75mm² conductors - length in metre variations

Flat electric cable

Flat textile cable with Teflon and PVC sheath 2x0.5mm² - Silver braid

cable-plat-argent-2x0.5mm

€4.50

Flat textile cable with PTFE and PVC sheath with two 0.5mm² conductors - length in metre variations

Flat electric cable

Flat textile cable with Teflon and PVC sheath 2x0.75mm² - Brass-coloured braid

cable-plat-laiton-2x0.75mm

€4.80

Flat textile cable with PTFE and PVC sheath with two 0.75mm² conductors - length in metre variations

Flat electric cable

Flat textile cable with Teflon and PVC sheath 2x0.5mm² - Brass-coloured braid

cable-plat-laiton-2x0.5mm

€4.50

PTFE and PVC sheathed flat textile cable with two 0.5mm² conductors - length in one metre variations

Round electric cable

Round textile cable with Teflon and PVC sheath 2x0.75mm² - Silver braid

cable-rond-argent-2x0.75mm

€4.80

PTFE and PVC sheathed round textile cable with two 0.75mm² conductors - length in metre variations

Round electric cable

Round textile cable with Teflon and PVC sheath 2x0.5mm² - Silver braid

cable-rond-argent-2x0.5mm

€4.50

PTFE and PVC sheathed round textile cable with two 0.5mm² conductors - length in metre variations

Round electric cable

Round textile cable with Teflon and PVC sheath 2x0.75mm² - Brass-coloured braid

cable-rond-laiton-2x0.75mm

€4.80

PTFE and PVC sheathed round textile cable with two 0.75mm² conductors - length in metre variations

Round electric cable

Round textile cable with Teflon and PVC sheath 2x0.5mm² - Brass-coloured braid

cable-rond-laiton-2x0.5mm

€4.50

PTFE and PVC sheathed round textile cable with two 0.5mm² conductors - length in metre variations

Flat textile cable with Teflon and PVC sheath 2x0.5mm² - Antique brass braid

Flat electric cable

Flat textile cable with Teflon and PVC sheath 2x0.75mm² - Antique brass braid

cable-plat-L-vieilli-2x0.75mm

€4.80

Flat textile cable with PTFE and PVC sheath with two 0.75mm² conductors - length in metre variations

Ring, hook, ball joint and spring

Retaining spring on socket for E14 base, mounting for glassware or luminaire

ressort-collerette-E14

€2.10

Retaining spring for E14 lamp holder

16mm diameter brass ball with M10 thread in 1mm increments

Column, tube, ball, luminaire tip, suspension ring

Brass ball, diameter 15mm, M10 threaded, 1mm pitch, non-through hole

DIY103229004-M10-Ø15mm

€1.60

Solid brass ball with M10 thread for assembling hollow polishing rods

Tools and assembly accessories

M10 brass sleeve with 17mm diameter collar - 14mm long

DIY109216084-HR17mm

€1.20

Hollow brass sleeve sold individually as standard M10 with 1mm fine pitch, length 14mm.

Tube and threaded accessory

M10 spherical double male threaded brass sleeve with side opening

DIY091-225022

€6.60

This hexagonal brass sleeve is perfect for assembling M10 hollow rods.

Protective sheath for white cable - white silica wire

Protective sheath for electrical cables

Protective sheath for white cable - silica wire and silicone coating - diameter...

DIY216 gaine-protect-blanc

€0.70

It is important to choose the internal diameter of the duct that best suits your needs from the various options available. One unit is equivalent to 1 linear metre.

Lamp and luminaire support

Silicone protection washer for M8 screws with 16mm external diameter

Rondelle-silicone-M8

€0.15

Transparent silicone washers to reduce vibration and absorb shock.

Lamp and luminaire support

Silicone protection washer for M6 screws, 11mm external diameter

Rondelle-silicone-M6

€0.10

Transparent silicone washers to reduce vibration and absorb shock.

Tube and threaded accessory

Transparent plastic screw with M6 thread and Ø 4mm hole - length 12mm

Vis-plas-trans-M6-Ø4-12mm

€0.15

Transparent plastic screw with M6 thread and 4mm diameter hole - 12mm long, perfect for discreet assembly.

Lamp and luminaire support

Silicone protection washer for M10 screw, external diameter depending on version

Rondelle-silicone

€0.60

Tube and threaded accessory

low transparent plastic nut for M10 tube, 1mm pitch, 4mm thick

écrou-plas-trans-M10-4mm

€0.15

The low, transparent plastic nuts are perfect for discreet assembly.

Lighting and lighting design

Joy glass pendant with leaf border for pull switch - black bronze ball chain

Boule-joy

€6.90

Joy glass pendant with leaf border for pull switch

Tools and assembly accessories

M10 brass sleeve with knurled base - 1mm thread pitch - 14mm long

DIY109216084-14mm

€1.00

Hollow brass sleeve sold individually as standard M10 with 1mm fine pitch, length 14mm.

LED bulbs

Chant-viron flame lamp with E14 base - 230 volts - dimmable satin glass

E14 Chant-viron-dim-blanc-sat

€12.00

Small full-spectrum LED filament lamp CRI 90.7 Ra - candle flame shape.

Cable clamp for brass lamp base electric cable - locking and anti-rotation

Brass and bronze creation for luminaire

Brass cable clamp for lamp base - locks and prevents rotation of electrical cable

Serre-câble-pied-lampe

€7.20

Brass cable clamp for lamp base - locks and prevents rotation of electrical cable with silicone cone

E27 230-volt LED bulbs

4-watt G45 LED globe bulb with E27 base - four dimmable filaments - polyethylene globe

G45 -4W-E27-dim-plas

€5.95

Filament bulbs are back, now with standard dimensions

Cable clamp, cable fastener, screws, interlock button

M4 brass screw with wide knurled cylindrical head, thread length 15mm

216038AL-C

€1.62

Screws and bolts for brass luminaire assembly

Lampholder and base

Ring for E27 Néliam screw lampholder in chrome-plated steel - colour according to range

DIY-067-neliam-E27

€2.40

Additional rings for Neliam sockets

Pull switch for lamp with chain for mounting on M10 threaded head

Electrical socket and switch

Pull cord switch with chain - single pole 2A/250V - fixing on M10 threaded head

inter-tire-auto-2A

€9.80

Pull switch for switching on a lamp

White nylon strain relief clevis for Ø 4.5mm round cable

Cable clamp, cable fastener, screws, interlock button

White nylon strain relief clevis for round cable - Ø 4.5mm hole

chape-blanc-Ø-4.5mm

€0.26

This accessory is ideal for hanging lights from your ceiling.

Sockets, multipliers, risers, adapter sockets

Brass adapter socket - E14 to E12

laiton-E14-E12

€1.95

Easily convert your E14 socket to an E12 base in an instant with this adapter socket

Ring, hook, ball joint and spring

M10 female / female stainless steel ball joint, one joint for threaded tube

Rotule-inox

€8.25

M10 threaded stainless steel ball joint for assembly on hollow shafts of chandeliers

Product available with different options

Tools and assembly accessories

Polishing bar for use on rubbers - 70gr solid polishing paste - roughing or finishing...

Pain-polish

€5.90

Choose the polishing product that's right for you from our range of products

View

Tools and assembly accessories

Small 230 volt 200 watt polishing grinder with variable speed control from 0 to 8000 rpm

touret-polish

€216.00

Small 230-volt bench polisher

Tube and threaded accessory

Black telescopic steel tube for luminaire on M10 threaded tube - length of pole...

Tube-tele-noir

€12.90

Black steel telescopic tube with M10 thread for assembling luminaires on hollow rods

Telescopic tube in chromium-plated steel M10 - length of pole according to variation

Tube and threaded accessory

Chrome-plated steel telescopic tube for luminaire on M10 threaded tube - pole length...

Tube-tele-chrome

€10.50

Chrome-plated steel telescopic tube with M10 thread for assembling luminaires on hollow rods

Cable clamp, cable fastener, screws, interlock button

Porcelain wall-mounted bollard for twisted electrical cable - chestnut brown

Borne-porcelaine-marron

€3.80

Porcelain bollard for decorative wall-mounted electrical cables

Cable clamp, cable fastener, screws, interlock button

Porcelain wall-mounted bollard for twisted electrical cable - chocolate colour

Borne-porcelaine-chocolat

€3.80

Porcelain bollard for decorative wall-mounted electrical cables

Cable clamp, cable fastener, screws, interlock button

Porcelain wall-mounted bollard for passing twisted electrical cables - colour pink

Borne-porcelaine-rosange

€3.80

Porcelain bollard for decorative wall-mounted electrical cables

Porcelain wall-mounted bollard for twisted electrical cable - white

Out-of-Stock

Cable clamp, cable fastener, screws, interlock button

Porcelain wall-mounted bollard for twisted electrical cable - white

Borne-porcelaine-blanc

€3.80

Porcelain bollard for decorative wall-mounted electrical cables

View

Cable clamp, cable fastener, screws, interlock button

Porcelain wall bollard for twisted electrical cable - Indian yellow

Borne-porcelaine-jaune

€3.80

Porcelain bollard for decorative wall-mounted electrical cables

Globify E27 lampholder in gloss enamelled porcelain in olive green

Lampholder and base

Globify E27 lampholder in high-gloss enamelled porcelain in olive green

Globify-E27-vert-olive

€12.00

E27 lampholder in shiny enamelled porcelain in olive green for a resolutely neo-retro style.

Lampholder and base

Globify E27 lampholder in black gloss porcelain enamel

Globify-E27-noir

€12.00

E27 lampholder in black gloss enamelled porcelain for a resolutely neo-retro style.

Lampholder and base

Globify E27 lampholder in gloss enamelled porcelain in pink

Globify-E27-jaune rosange

€12.00

E27 lampholder in shiny enamelled porcelain in pink for a resolutely neo-retro style.

Lampholder and base

Globify E27 lampholder in high-gloss enamelled porcelain in Indian yellow

Globify-E27-jaune indien

€12.00

E27 lampholder in shiny enamelled porcelain in Indian yellow for a resolutely neo-retro style.

Globify E27 lampholder in high-gloss porcelain enamel in pearly white

Out-of-Stock

Lampholder and base

Globify E27 lampholder in high-gloss porcelain enamel in pearly white

Globify-E27-blanc-nacre

€12.00

E27 lampholder in high-gloss enamelled porcelain in pearly white for a resolutely neo-retro style.

View

Lampholder and base

Globify E27 lampholder in high-gloss enamelled porcelain in French blue

Globify-E27-bleu-france

€12.00

E14 lampholder in shiny enamelled porcelain in French blue for a resolutely neo-retro style.

E14 lampholder in gloss enamelled porcelain in pearl grey

Lampholder and base

E14 lampholder in high-gloss enamelled porcelain in pearl grey

E14 porcelaine gris perle

€8.20

E14 lampholder in pearl grey gloss enamelled porcelain for a resolutely neo-retro style.

Lampholder and base

E14 lampholder in gloss enamelled porcelain in olive green

E14 porcelaine vert olive

€8.20

E14 lampholder in shiny enamelled porcelain in olive green for a resolutely neo-retro style.

Lampholder and base

E14 lampholder in apple green gloss enamelled porcelain

E14 porcelaine vert pomme

€8.20

E14 lampholder in apple green gloss enamelled porcelain for a resolutely neo-retro style.

Lampholder and base

E14 lampholder in high-gloss porcelain enamel in royal blue

E14 porcelaine bleu royal

€8.20

E14 lampholder in royal blue gloss enamelled porcelain for a resolutely neo-retro style.

Lampholder and base

E14 lampholder in chestnut brown gloss porcelain enamel

E14 porcelaine marron chataigne

€8.20

E14 lampholder in chestnut brown gloss enamelled porcelain for a resolutely neo-retro style.

Lampholder and base

E14 lampholder in gloss enamelled porcelain in Indian yellow

E14 porcelaine jaune

€8.20

E14 lampholder in gloss enamelled porcelain in Indian yellow for a resolutely neo-retro style.

Lampholder and base

E14 black gloss porcelain enamel lampholder

E14 porcelaine noir

€8.20

E14 lampholder in black gloss enamelled porcelain for a resolutely neo-retro style.

Lampholder and base

E14 lampholder in high-gloss porcelain enamel in pink

E14 porcelaine rosange

€8.20

E14 lampholder in shiny enamelled porcelain in pink for a resolutely neo-retro style.

Lampholder and base

E14 lampholder in high-gloss enamelled porcelain in French blue

E14 porcelaine bleu france

€8.20

E14 lampholder in shiny enamelled porcelain in French blue for a resolutely neo-retro style.

E14 lampholder in gloss enamelled porcelain in mother-of-pearl white

Lampholder and base

E14 lampholder in high-gloss enamelled porcelain in mother-of-pearl white

E14 porcelaine blanc nacre

€8.00

E14 lampholder in gloss enamelled porcelain in mother-of-pearl white for a resolutely neo-retro style.

Rosette, bell, claw and socket cover

Aluminium rose Ø 82 to 120mm - mounting kit for glass luminaire or other suspended...

Rosace-alu-82-120

€19.50

This fixing kit is ideal for designers of light fittings on glassware or any other suspended structure that you make yourself.

Rosette, bell, claw and socket cover

Aluminium rose Ø 73 to 110mm - mounting kit for glass luminaire or other suspended...

Rosace-alu-73-110

€16.50

This fixing kit is ideal for designers of light fittings on glassware or any other suspended structure that you make yourself.

Rosette, bell, claw and socket cover

Aluminium rose Ø 63 to 100mm - mounting kit for glass luminaire or other suspended...

Rosace-alu-63-100

€14.30

This fixing kit is ideal for designers of light fittings on glassware or any other suspended structure that you make yourself.

Rosette, bell, claw and socket cover

Aluminium rose Ø 51 to 70mm - mounting kit for glass luminaire or other suspended...

Rosace-alu-51-70

€8.60

This fixing kit is ideal for designers of light fittings on glassware or any other suspended structure that you make yourself.

Rosette, bell, claw and socket cover

Aluminium rose Ø 40 to 60mm - mounting kit for glass luminaire or other suspended...

Rosace-alu-40-60

€10.50

This fixing kit is ideal for designers of light fittings on glassware or any other suspended structure that you make yourself.

Rosette, bell, claw and socket cover

Aluminium rose Ø 36 to 50mm - mounting kit for glass luminaire or other suspended...

Rosace-alu-36-50

€8.50

This fixing kit is ideal for designers of light fittings on glassware or any other suspended structure that you make yourself.

Out-of-Stock

Rosette, bell, claw and socket cover

Aluminium rose Ø 63 to 87mm - mounting kit for glass luminaire or other suspended...

Rosace-alu-63-87

€9.20

This fixing kit is ideal for designers of light fittings on glassware or any other suspended structure that you make yourself.

View

Electrical socket and switch

Lever switch with On / Off indicator light on 2.8 mm flat plug - colour according to...

inter-levier-

€13.50

Lamp power switch with lever knob

Electrical socket and switch

Aviation type safety cover for lever switch - red or black depending on version

protec-inter-

€4.50

Toggle covers for lever switches

Electrical socket and switch

M6 sealing cap for knurled microswitch buttons - black

micro-capuchon-noir

€1.90

Sealing cap for micro toggle switches

Electrical socket and switch

Half sealing cap for switch knobs - hexagonal - red, black depending on version

Demi-capuchon-étanche

€3.90

Half sealing cap for lever switches

Electrical socket and switch

Sealing cap for switch knobs - hexagonal - red, black depending on version

Capuchon-étanche

€3.50

Sealing cap for lever switches

Electrical socket and switch

Sealing cap for knurled switch knobs - red, black depending on version

Capuchon-étanche

€3.50

Sealing cap for lever switches

Electrical socket and switch

Chrome-plated steel lever switch On / Off switch - cable connection

inter-cable-on-off-chrome

€7.80

Lamp power switch with lever knob

Electrical socket and switch

nameplates for lever switches - various models available

inter à levier-va-vient-12L-chrome

€0.30

Lamp power switch with lever knob

Ring, hook, ball joint and spring

Zamac ball joint, one joint for M10 threaded tube - colour according to version

Rotule-DIY117

€6.95

Aluminium alloy ball joint with M10 thread for assembly on hollow polishing rods

Out-of-Stock

Electrical socket and switch

Micro switch with lever or rocker switch On / Off / On on plug or solder - chrome

Micro-inter-12J-chrome

€3.50

Micro Switch for switching on a lamp with lever button

View

Electrical socket and switch

On / On toggle or rocker switch for in-and-out circuits screw terminal - chrome

inter à levier-va-vient-12L-chrome

€6.60

Lamp power switch with lever knob

Electrical socket and switch

On / Off single-pole toggle or rocker switch with screw terminal - chrome

inter à levier-cap-11L-chrome

€6.20

Lamp power switch with lever knob

Cable clamp, cable fastener, screws, interlock button

Black plastic screw M6 headless length 8mm sold in packs of 10, 100 or 1000 pieces

vis-noir-M6-8mm

€0.68

Headless plastic screws for socket glands.

Cable clamp, cable fastener, screws, interlock button

Black plastic screw M6 headless length 6mm sold in packs of 10, 100 or 1000 pieces

vis-noir-M6-6mm

€0.62

Headless plastic screws for socket glands.

Cable clamp, cable fastener, screws, interlock button

Black plastic screw M5 headless length 8mm sold in packs of 10, 100 or 1000 pieces

vis-noir-M5-8mm

€0.60

Headless plastic screws for socket glands.

Cable clamp, cable fastener, screws, interlock button

Black plastic screw M5 headless length 6mm sold in packs of 10, 100 or 1000 pieces

vis-noir-M5-6mm

€0.58

Headless plastic screws for socket glands.

M4 black plastic screw, headless, length 6mm

Cable clamp, cable fastener, screws, interlock button

Black plastic screw M4 without head length 6mm sold in packs of 10, 100 or 1000 pieces

vis-noir-M4-6mm

€0.52

Headless plastic screws for socket glands.

Cable clamp, cable fastener, screws, interlock button

Black plastic screw M4 without head length 4mm sold in packs of 10, 100 or 1000 pieces

vis-noir-M4-4mm

€0.48

Headless plastic screws for socket glands.

Cable clamp, cable fastener, screws, interlock button

White M4 headless plastic screw, length 4mm sold in packs of 10, 100 or 1000 pieces

vis-blanc-M4-4mm

€0.48

Headless plastic screws for socket glands.

Cable clamp, cable fastener, screws, interlock button

White M6 headless plastic screw, length 8mm sold in packs of 10, 100 or 1000 pieces

vis-blanc-M6-8mm

€0.68

Headless plastic screws for socket glands.

Cable clamp, cable fastener, screws, interlock button

White M6 headless plastic screw, length 6mm sold in packs of 10, 100 or 1000 pieces

vis-blanc-M6-6mm

€0.60

Headless plastic screws for socket glands.

Cable clamp, cable fastener, screws, interlock button

White M4 headless plastic screw, length 6mm sold in packs of 10, 100 or 1000 pieces

vis-blanc-M4-6mm

€0.52

Headless plastic screws for socket glands.

Cable clamp, cable fastener, screws, interlock button

White plastic screw M5 without head length 6mm sold in packs of 10, 100 or 1000 pieces

vis-blanc-M5-6mm

€0.58

Headless plastic screws for socket glands.

Cable clamp, cable fastener, screws, interlock button

White M5 headless plastic screw, length 8mm sold in packs of 10, 100 or 1000 pieces

vis-blanc-M5-8mm

€0.62

Headless plastic screws for socket glands.

Lamp and luminaire support

Box for Velma brass lamp holder - size 178mm x 120mm

DIY170-Velma

€39.60

Velma brass bell for wall light

Lamp and luminaire support

Box for Vixen brass lamp holder - size 220mm x 130mm

DIY170-Vixen

€81.90

Vixen brass horn for wall light

Lamp and luminaire support

Box for Sookie brass lamp holder - size 165mm x 100mm

DIY170-Sookie

€42.50

Sookie brass bell for wall light

Lamp and luminaire support

Hershey brass horn - plate for rectangular wall light 160mm x 110mm

DIY170-Hershey

€85.60

Hershey brass bell for wall mounting in combination withbrass rose Ø 53 to 70mm

Flat electric cable

Flat textile cable with Teflon and PVC sheath 2x0.5mm² - Antique brass braid

cable-plat-L-vieilli-2x0.5mm

€4.50

PTFE and PVC sheathed flat textile cable with two 0.5mm² conductors - length in one metre variations

Round electric cable

Round textile cable with Teflon and PVC sheath 2x0.75mm² - Antique brass braid colour

cable-rond-L-vieilli-2x0.75mm

€4.80

PTFE and PVC sheathed round textile cable with two 0.75mm² conductors - length in metre variations

Round electric cable

Round textile cable with Teflon and PVC sheath 2x0.5mm² - Antique brass braid colour

cable-rond-L-vieilli-2x0.5mm

€4.50

PTFE and PVC sheathed round textile cable with two 0.5mm² conductors - length in metre variations

Nut and washer

Deep-drawn brass cup washer outer diameter 29mm, 22mm and 15mm

DIY211-Rondelle-cuvette-emb

€0.24

This washer is particularly suitable for assembling old luminaires.

Nut and washer

Brass fan washer for tubes with internal toothed spout thread type JZ

Rondelle-eventail-laiton-bec

€0.30

This fan lock washer is particularly suitable for assembling old luminaires.

Dottie electric cable clamp in brass - silicone cable lock

Brass and bronze creation for luminaire

Dottie electrical cable clamp in brass - silicone cable lock - M10 thread, 1mm pitch

DIY206-Dottie

€5.20

Dottie brass electrical cable clamp for lamp socket or ceiling rose cable clamp with silicone cone

Wiggles electric cable clamp in brass - silicone cable lock

Out-of-Stock

Brass and bronze creation for luminaire

Wiggles electric cable clamp in brass - silicone cable lock - M10 thread, 1mm pitch

DIY207-Wiggles

€4.75

Brass electrical cable clamp Wiggles for lamp socket or ceiling rose Cable clamp with silicone cone

View

Out-of-Stock

Brass and bronze creation for luminaire

Jewel electric cable clamp in brass - silicone cable lock - M10 thread, 1mm pitch

DIY208-Jewel

€4.90

Jewel brass electrical cable clamp for lamp socket or ceiling rose cable lock with silicone cone

View

Out-of-Stock

Brass and bronze creation for luminaire

Harlow electric cable clamp in brass - silicon cable lock - M10 thread, 1mm pitch

DIY209-Harlow

€3.50

Harlow brass electrical cable clamp for lamp socket or ceiling rose cable lock with silicone cone

View

Out-of-Stock

Brass and bronze creation for luminaire

Clover electric cable clamp in brass - silicon cable lock - M10 thread, 1mm pitch

DIY210-Clover

€3.20

Clover brass electrical cable clamp for lamp socket or ceiling rose cable clamp with silicone cone

View

Column, tube, ball, luminaire tip, suspension ring

Hammered brass ball diameter 32mm, 25mm and 17mm - M4 non-through threaded

DIY205

€12.22

Hammered finish brass ball, diameter according to choice.

Brass and bronze creation for luminaire

Anti-pull electric cable lock - rotation on M10 threaded tube E27 lamp base

DIY195-SDI27

€0.45

Anti-pull electric cable lock - rotation inside a lamp socket

Brass and bronze creation for luminaire

Anti-pull electric cable lock - rotation on M10 threaded tube E14 - E27 lamp socket

DIY194-SDI14

€0.44

Anti-pull electric cable lock - rotation inside a lamp socket

Brass and bronze creation for luminaire

Electric cable strain relief wedge lock for flat cable 6 x 3.5 mm

DIY196-270032N

€0.45

Anti-pull electrical cable lock can be installed inside a lamp socket

Brass and bronze creation for luminaire

Anti-pull electric cable lock - rotation for flat cable 6 x 3.5 mm

DIY193-009

€0.45

Anti-pull electric cable lock - rotates inside a lamp socket

Power cable and extension lead

Rocker switch for bedside lamp - transparent plastic

DIY204-304T

€2.95

Toggle switch for bedside lamp

Power cable and extension lead

Rocker switch for bedside lamp - white plastic

DIY204-304B

€2.95

Toggle switch for bedside lamp

Power cable and extension lead

Rocker switch for bedside lamp - black plastic

DIY204-304N

€2.95

Rocker switch for bedside lamp

Power cable and extension lead

70mm diameter round foot switch for floor lamp - transparent plastic

DIY202-317T

€3.95

70 mm diameter round foot switch with push button

70mm diameter round foot switch - white plastic

Power cable and extension lead

70mm diameter round foot switch for floor lamp - white plastic

DIY202-317B

€3.95

70 mm diameter round foot switch with push button

70mm diameter round foot switch - black plastic

Power cable and extension lead

70mm diameter round foot switch for floor lamp - black plastic

DIY202-317N

€3.95

70 mm diameter round foot switch with push button

Tools and assembly accessories

Adapter ring with retaining lugs for E27 or B22 to E14 lampshades

Anneau-patte- E27-E14

€0.70

These small nylon rings make it easy to fit a large-diameter shade to an E14 lampholder.

Rosette, bell, claw and socket cover

Selma brass tiered top pavilion - diameter 117mm M10 tube passage

DIY185-2015-11730

€76.20

Selma brass pavilion in cast brass for antique luminaire

Rosette, bell, claw and socket cover

Selma brass tiered top pavilion - diameter 96mm M10 tube passage

DIY185-2014-9624

€52.50

Selma brass pavilion in cast brass for antique luminaire

Rosette, bell, claw and socket cover

Selma brass stepped top pavilion - diameter 77mm M10 tube passage

DIY185-2013-7720

€31.50

Selma brass pavilion in cast brass for antique luminaire

Selma brass tiered top bell - diameter 56mm

Rosette, bell, claw and socket cover

Selma brass top-floor horn - diameter 56mm M10 tube passage

DIY185-2012-5614

€19.80

Selma brass pavilion in cast brass for antique luminaire

Rosette, bell, claw and socket cover

Selma brass tiered top pavilion - diameter 45mm M10 tube passage

DIY185-2011-4512

€14.50

Selma brass pavilion in cast brass for antique luminaire

Cable clamp, cable fastener, screws, interlock button

White nylon strain relief clevis for flat cable - bore 6.2 x 4.1mm

chape-blanc-6.2-4.1

€0.26

This accessory is ideal for hanging lights from your ceiling.

Cable clamp, cable fastener, screws, interlock button

Bracket for suspending a double-flange luminaire with earth terminal for M10 tube, 1mm...

bélière-double-M10

€3.50

This accessory is ideal for hanging lights from your ceiling.

Cable clamp, cable fastener, screws, interlock button

Bracket for suspending a luminaire with earth terminal on 10 mm diameter tube in 1 mm...

bélière-simple

€3.40

This accessory is ideal for hanging lights from your ceiling.

Earthing clamp on M10 tube - 2.8mm female lug

Tube and threaded accessory

Earthing strap on M10 tube - 2.8mm female lug

bride-cosse-2.8

€0.10

An accessory for securing a luminaire.

Cable clamp, cable fastener, screws, interlock button

White nylon suspension clevis with blocking and strain relief for flat cable

DIY199-14523B

€1.00

This accessory is ideal for hanging lights from your ceiling.

Blocking and anti-pull suspension clevis for round cable

Cable clamp, cable fastener, screws, interlock button

Black nylon suspension clevis with blocking and strain relief for round cable

DIY198-02437N

€1.00

This accessory is ideal for hanging lights from your ceiling.

Tiana electric cable clamp in brass - silicon cable lock - M10 threaded hole

Brass and bronze creation for luminaire

Tiana electric cable clamp in brass - silicone cable lock - M10 thread, 1mm pitch

DIY190-SC-Tiana

€4.75

Tiana brass electrical cable clamp for lamp socket or ceiling rose cable lock with silicone cone

Nettie electric cable clamp in brass - silicon cable lock

Out-of-Stock

Brass and bronze creation for luminaire

Nettie electrical cable clamp in brass - silicone cable lock - M10 thread, 1mm pitch

DIY186-SC-nettie

€4.30

Nettie brass electrical cable clamp for lamp socket or ceiling rose cable clamp with silicone cone

View

Kiara electric cable clamp in brass - silicon cable lock

Out-of-Stock

Brass and bronze creation for luminaire

Kiara electrical cable clamp in brass - silicone cable lock - M10 thread, 1mm pitch

DIY187-SC-Kiara

€3.50

Kiara brass electrical cable clamp for lamp socket or ceiling rose cable clamp with silicone cone

View

Brass and bronze creation for luminaire

Carly electric cable clamp in brass - silicon cable lock - M10 thread, 1mm pitch

DIY188-SC-Carly

€2.95

Carly brass electrical cable clamp for lamp socket or ceiling rose cable lock with silicone cone

Brass and bronze creation for luminaire

Shiloh electric cable clamp in brass - silicone cable lock - M10 thread, 1mm pitch

DIY189-SC-Shiloh

€5.80

Shiloh brass electrical cable clamp for lampholder or ceiling rose cable clamp with silicone cone

Brass and bronze creation for luminaire

Anti-pull electric cable lock - rotation on M10 threaded tube

DIY197-02541

€0.45

Anti-pull electric cable lock - rotation inside a lamp socket

Nut and washer

M10 brass fan washer with internal serrations type JZ

Rondelle-eventail-laiton-M10

€0.30

This fan lock washer is particularly suitable for assembling old luminaires.

Nut and washer

M8 brass fan washer with internal serrations type JZ

Rondelle-eventail-laiton-M8

€0.17

This fan lock washer is particularly suitable for assembling old luminaires.

Nut and washer

M6 brass fan washer with internal serrations type JZ

Rondelle-eventail-laiton-M6

€0.13

This fan lock washer is particularly suitable for assembling old luminaires.

Cable clamp, cable fastener, screws, interlock button

White plastic M10 male electrical cable clamp for lamp socket with M6 locking screw

Serre-M10-blanc-male

€1.20

White plastic electrical cable clamp for lamp socket or ceiling rose with M10 male thread

Cable clamp, cable fastener, screws, interlock button

Black plastic M10 male electrical cable clamp for lamp socket with M6 locking screw

Serre-M10-noir-male

€1.20

Black plastic electrical cable clamp for lamp socket or ceiling rose with M10 male thread

Plastic insulating sleeve for cable entry on E27 socket

Brass and bronze creation for luminaire

Plastic insulating sleeve for passing electrical cable inside an E27 lamp socket

DIY200-ISOL-E27

€0.30

Generally used inside an E27 lampholder to protect cables from contact with metal parts

Plastic insulating sleeve for cable entry for E14 lampholder

Brass and bronze creation for luminaire

Plastic insulating sleeve for passing electrical cable inside an E14 lampholder

DIY201-ISOL-E14

€0.25

Generally used inside an E14 lampholder to protect cables from contact with metal parts

Glassware, stoneware, designer lighting

Frosted candle flame glass for D11 base and G4 lamp

Verrerie-flamme-depoli-D11

€8.20

Frosted glassware in the shape of a candle flame for D11 base and G4 lamp

50mm diameter frosted globe glass for D11 base and G4 lamp

Out-of-Stock

Glassware, stoneware, designer lighting

30mm diameter frosted globe glass for D11 base and G4 lamp

Verrerie-globe-depoli-30mm-D11

€7.20

30 mm diameter frosted globe glass for G4 lamp on D11 lampholder.

View

Out-of-Stock

Glassware, stoneware, designer lighting

40mm diameter frosted globe glass for D11 base and G4 lamp

Verrerie-globe-depoli-40mm-D11

€8.00

40 mm diameter frosted globe glass for G4 lamp on D11 lampholder.

View

anti-pull - rotation of cable inside a lampholder

Brass and bronze creation for luminaire

Anti-pull electric cable lock - rotation inside a lamp socket

DIY192-008

€0.45

Anti-pull electric cable lock - rotation inside a lamp socket

Lampholder and base

Brass E27 base lampholder - crimp cable connection on pins

Douille-E27-sertir

€1.00

E27 crimp lamp holder

Lampholder and base

Brass E14 base lampholder - crimp cable connection on pins

Douille-E14-sertir

€0.75

E14 crimp lampholder

Lampholder and base

Socket with E12 base in brass - crimp cable connection on pins

Douille-E12-sertir

€0.75

E12 crimp lampholder

Out-of-Stock

Lampholder and base

Socket with E12 base in brass - cable connection to be soldered on two lamellae

Douille-E12-souder

€0.80

E12 solder lamp holder

View

Brass E14 socket for soldering onto two lamellae

Lampholder and base

Chrome-plated brass E14 base lampholder - cable connection to be soldered on two lamellae

Douille-E14-souder

€0.85

E14 lamp holder for soldering

Brass and bronze creation for luminaire

Naya electric cable clamp in brass - silicon cable lock - M10 thread, 1mm pitch

DIY191-SC-Naya

€5.70

Naya brass electrical cable clamp for lamp socket or ceiling rose cable clamp with silicone cone

Chrome-plated brass electrical cable clamp with cable gland

Brass and bronze creation for luminaire

Chrome-plated brass electrical cable clamp - silicon cable lock - M10 thread, 1.5 mm pitch

serre-cable-M10-1.5mm

€2.95

Chrome-plated brass electrical cable clamp for light bulb socket or ceiling rose with M10 thread, 1.5 mm pitch.

M10 threaded brass electrical cable clamp with M4 locking screw

Cable clamp, cable fastener, screws, interlock button

23.6mm diameter M10 threaded brass electric cable clamp with M4 locking screw

DIY213-cz2

€2.90

Brass electrical cable clamp for lamp socket or ceiling rose with M10 thread.

Cable clamp, cable fastener, screws, interlock button

Brass electric cable clamp, diameter 18mm, M10 threaded with M4 locking screw

DIY212-cz1

€2.70

Brass electrical cable clamp for lamp socket or ceiling rose with M10 thread.

Tube and threaded accessory

Brass adaptor M10 male to female spout pitch

adapt-M10/M-PDB/F

€1.95

Small brass adaptor M10 male to female spout pitch

Tube and threaded accessory

Brass adaptor male spout pitch to female M10

adapt-PDB/M-M10/F

€1.95

Small brass adaptor male spout pitch to female M10

17.5mm diameter cable locking clevis two anti-pull cable claws

Cable clamp, cable fastener, screws, interlock button

17.5mm diameter cable locking clevis with two anti-pull cable claws - white nylon

chape-anti-trac-griffe-17.5-P

€0.45

This accessory is ideal for hanging your lights.

22mm diameter cable locking clevis to prevent cable traction

Cable clamp, cable fastener, screws, interlock button

22mm diameter cable locking clevis with two anti-pull cable claws - white nylon

chape-anti-trac-griffe-22-G

€0.49

This accessory is ideal for hanging your lights.

Cable clamp, cable fastener, screws, interlock button

Black nylon strain relief clevis for flat cable - bore 6.3 x 4.3mm

chape-noir-6.3-4.3

€0.26

This accessory is ideal for hanging lights from your ceiling.

Cable clamp, cable fastener, screws, interlock button

Black nylon strain relief clevis for round cable

chape-anti-trac-noir-rond

€0.25

This accessory is ideal for hanging lights from your ceiling.

Cable clamp, cable fastener, screws, interlock button

Black nylon suspension clevis, anti-pull cable lock

chape-bloc-noir

€0.25

This accessory is ideal for hanging lights from your ceiling.

Cable clamp, cable fastener, screws, interlock button

White nylon suspension clevis, anti-pull cable lock

chape-bloc-blanc

€0.25

This accessory is ideal for hanging lights from your ceiling.

Cable clamp, cable fastener, screws, interlock button

Brass wall-mounted bollard with knurled nut for electrical cable entry

Borne-laiton-moleté

€7.50

Brass bollard for decorative wall-mounted electrical cables

Tube and threaded accessory

Hexagonal profile 15mm brass riser with M10 threads

Manchon-rehausse-15mm

€3.00

This hexagonal brass sleeve is perfect for assembling M10 hollow rods.

Tube and threaded accessory

Hexagonal profile 10mm brass riser sleeve with M10 threads / tappings

Manchon-rehausse-10mm

€2.80

This hexagonal brass sleeve is perfect for assembling M10 hollow rods.

Tube and threaded accessory

Brass sleeve with hexagonal profile and two M10 threads and tappings

Manchon-M/F-M10

€4.75

This hexagonal brass sleeve is perfect for assembling M10 hollow rods.

Tube and threaded accessory

Hexagonal brass sleeve with double M10 thread and cable entry hole

manchon-M10-sezane

€4.15

This double-threaded hexagonal brass sleeve is perfect for assembling lamp sockets.

LED lamp holder for ceramic or glass luminaire

Sockets, multipliers, risers, adapter sockets

M56 aluminium LED lamp holder with round thread and M10 tube thread

Douille-support-aluminium M56

€10.56

This LED lamp holder makes it easy to install small LED light sources in your custom-made luminaires.

Tube and threaded accessory

Threaded rod in stainless steel 310 S pitch 1.5mm high temperature resistance - length...

inox-refrac-310-1metre

€60.00

This threaded galvanised steel tube is ideal for restoring old luminaires.

Electrical socket and switch

Brass-plated steel lever switch On / Off switch - cable connection

inter-cable-on-off-laiton

€7.80

Lamp power switch with lever knob

Electrical socket and switch

Micro switch with lever or rocker switch On / Off / On on plug or soldered - brass plated

Micro-inter-12J

€3.50

Micro Switch for switching on a lamp with lever button

33 mm diameter brass collar for E27 - Ø 72mm lampholder

Rosette, bell, claw and socket cover

Brass claw collar for luminaire support - diameter 33 mm for E27 lampholder - Ø 78mm

DIY1491270070

€7.80

Brass suspension claw, for holding a lampshade or glass luminaire with an integrated lampholder.

Threaded tube in galvanised steel, spout pitch 1 metre long

Tube and threaded accessory

Threaded galvanised steel tube with spout pitch - length 50 centimetres

DIY178-becs-50cm

€12.00

This threaded galvanised steel tube is ideal for restoring old luminaires.

Tube and threaded accessory

Threaded tube in galvanised steel with spout pitch - 1 metre long

DIY178-becs-1mètre

€25.00

This threaded galvanised steel tube is reserved for restoring old luminaires.

Tube and threaded accessory

Zinc-plated steel nut, hexagonal, threaded, 10.85 diameter, 1.33 mm pitch

Ecrou-zing-pas-des-becs

€0.60

These zinc-plated steel nuts, tapped to the spout pitch, are reserved for restoring old luminaires.

Flat electrical wire red black 2 wires 0.75mm² length 1m

Flat electric cable

Flat electric wire red black 2 wires 1.5 mm² length 1m

EFACSTP035-1.5-1m

€2.50

Flat electric wire red black 2 wires 1.5mm² length 1m

Flat electric cable

Flat electrical wire red black 2 wires 1 mm² length 1m

EFACSTP035-1-1m

€1.70

Flat electric wire red black 2 wires 1mm² length 1m

Tube and threaded accessory

Threaded brass tube with spout pitch - length 30mm

DIY177-becs-30mm

€1.70

This threaded galvanised steel tube is ideal for restoring old luminaires.

Tube and threaded accessory

Threaded brass tube with spout pitch - length 50mm

DIY177-becs-50mm

€2.53

This threaded brass tube is reserved for restoring old light fittings.

Tube and threaded accessory

Threaded brass tube with spout pitch - length 40mm

DIY177-becs-40mm

€2.04

This threaded brass tube is reserved for restoring old light fittings.

Tube and threaded accessory

Threaded tube in zinc-plated steel with spout pitch - length 30mm

DIY178-becs-30mm

€0.70

This threaded galvanised steel tube is ideal for restoring old luminaires.

Tube and threaded accessory

Threaded brass tube with spout pitch - 20mm long

DIY177-becs-20mm

€1.19

This threaded brass tube is reserved for restoring old light fittings.

Tube and threaded accessory

Brass hexagonal nut for threaded tube with 10.85 mm diameter spouts at 1.33 mm pitch

Ecrou-laiton-pas-des-bec

€0.70

These brass nuts tapped to the spout pitch are reserved for restoring old light fittings.

Tube and threaded accessory

Threaded brass tube with spout pitch - length 15mm

DIY177-becs-15mm

€0.89

This threaded brass tube is reserved for restoring old light fittings.

Ring, hook, ball joint and spring

Fixing bracket for luminaire mounted on M12 threaded rod - Length 64mm

Pont-m12-64mm

€2.95

Luminaire fixing bracket with M12 thread

Lampholder and base

Brass rosette - mounting kit for luminaire or other decorative structure - Ø 42 to 52mm

DIY171C01370026

€19.20

The perfect fixing kit for creators of luminaires on glass or any other self-made suspended structure.

2x0.3mm electrical cable on transparent Teflon

Round electric cable

Round electrical cable with two 2x1.5mm² conductors on transparent PVC sheath and...

cable-PVC-teflon-2x-1.5mm

€6.71

Transparent two-core electrical cable with 1.5 mm² wires - length in 1 metre variations

Electrical cable on transparent sheath

Round electrical cable with two 2x1mm² conductors on transparent PVC sheath and...

cable-PVC-teflon-2x-1mm

€5.94

Transparent two-core electrical cable with 1mm² wires - length in one-metre variations

Suspension ring machined brass M20 * 1.5mm thread

Ring, hook, ball joint and spring

Brass suspension ring machined from solid M20 thread, 1.5 mm pitch

DIY089-218008-M20-1.5

€9.90

M20 brass threaded ring for fixing lamp sockets or luminaires

Short metric straight fluted tap in HSS steel

Product available with different options

Tools and assembly accessories

Short metric straight fluted tap in HSS steel - standard or fine pitch depending on the...

Taraud-HSS

€13.05

Metric fine thread tap, HSS, for electric threaded pipe - size according to variant any size

View

Adjustable left-hand turn for taps M1 to M10 size 1

Out-of-Stock

Tools and assembly accessories

Adjustable left-hand turn for taps from M5 to M20 size 3 aluminium body with two steel...

Tourne-à-gauche-n3

€26.90

Tap holder - left-hand turn size N3 with removable handles

View

Tools and assembly accessories

Adjustable left-hand turn for taps from M4 to M12 size 2 aluminium body with two steel...

Tourne-à-gauche-n2

€14.90

Tap holder - left-hand turn size N2 with removable handles

Tools and assembly accessories

Adjustable left-hand turn for taps from M1 to M10 size 1 aluminium body with two steel...

Tourne-à-gauche-n1

€5.90

Left-hand tap holder size M1 with removable handles

Tube and threaded accessory

M10 to M16 dichromated steel reduction sleeve for electrical tube - height 25mm

Manchon-reduc-M10-M16-H25

€1.92

This bichromated steel reduction sleeve is perfect for joining 2 threaded tubes of different diameters.

M6 x 20mm socket headless stainless steel screw with nylon tip

Cable clamp, cable fastener, screws, interlock button

M3 stainless steel socket headless screw with nylon pressure pin

vis-inox-nylon

€1.20

M3 stainless steel screws for luminaire assembly

Cable clamp, cable fastener, screws, interlock button

M4 stainless steel socket headless screw with nylon pressure pin

vis-inox-nylon

€1.44

M4 stainless steel screws for luminaire assembly

Cable clamp, cable fastener, screws, interlock button

M8 stainless steel socket headless screw with nylon pressure stud

vis-inox-nylon

€1.92

M8 stainless steel screws for luminaire assembly

Product available with different options

Cable clamp, cable fastener, screws, interlock button

M5 stainless steel socket headless screw with nylon pressure pin

vis-inox-nylon

€1.32

M5 stainless steel screws for luminaire assembly

View

Cable clamp, cable fastener, screws, interlock button

M6 stainless steel socket headless screw with nylon pressure pin

vis-inox-nylon

€1.68

M6 stainless steel screws for luminaire assembly

Tube and threaded accessory

M10 to M14 dichromated steel reduction sleeve for electrical tube - height 24mm

Manchon-reduc-M10-M14

€1.80

This bichromated steel reduction sleeve is perfect for joining 2 threaded tubes of different diameters.

Tube and threaded accessory

Hexagonal socket in dichromated steel, tapped for M12 electrical tube - Height 24mm

Manchon-M12-bichr-24mm

€1.20

This hexagonal bichromated steel sleeve is perfect for assembling M12 hollow rods.

Tube and threaded accessory

Hexagonal socket in dichromated steel, tapped for M10 electrical tube - Height 15mm

Manchon-M10-bichr-15mm

€0.90

This hexagonal bichromated steel sleeve is perfect for assembling M10 hollow rods.

Tube and threaded accessory

Hexagonal socket in dichromated steel, tapped for M10 electrical tube - Height 20mm

Manchon-M10-bichr-20mm

€0.95

This hexagonal bichromated steel sleeve is perfect for assembling M10 hollow rods.

Rosette, bell, claw and socket cover

Carroz brass horn and box - diameter from 60 to 200 mm outside, depending on version

DIY086-carroz

€16.50

Carroz brass horn for antique luminaire

Lighting and lighting design

Marbled natural stone ring in shades of brown and orange for threaded tube - diameter...

pierre-marron-orange-47

€14.20

A decorative element in natural stone to assemble the luminaires, allowing the cables to pass through on M10 hollow rods.

Marbled natural stone ring in shades of brown and orange - diameter 58mm height 25mm

Lighting and lighting design

Marbled natural stone ring in shades of brown and orange for threaded tube - diameter...

pierre-marron-orange-58

€17.90

A decorative element in natural stone to assemble the luminaires, allowing the cables to pass through on M10 hollow rods.

White marbled natural stone ring for threaded tube - diameter 47mm

Lighting and lighting design

White marbled natural stone ring drilled for threaded tube - diameter 63mm height 30mm

pierre-blanc-63

€17.90

A decorative element in natural stone to assemble the luminaires, allowing the cables to pass through on M10 hollow rods.

Lighting and lighting design

White marbled natural stone ring drilled for threaded tube - diameter 47mm height 24mm

pierre-blanc-47

€14.20

A decorative element in natural stone to assemble the luminaires, allowing the cables to pass through on M10 hollow rods.

Electrical cable on transparent sheath

Round electrical cable with two 2x0.2mm² conductors on transparent PVC sheath and...

cable-2x-0.2mm

€2.30

Transparent two-core electrical cable with 0.2mm² wires - length in one-metre variations

Electrical flat wire grey white 2 wires 0.3mm² AWG22

Flat electric cable

Flat grey-white 2-core 0.3mm² AWG22 electrical cable - length over one metre splice

EFACSTP035-G/B-0,3

€1.40

Electrical flat wire grey white 2 wires 0.3mm² length 1m

Brass and bronze creation for luminaire

Leaf-shaped brass luminaire reflector with lobed edge

réflecteur-lobé-grand

€68.80

This reflector is designed to give the light a preferred direction

Rosette, bell, claw and socket cover

Mild brass socket cover with 40mm diameter rim 48mm high

DIY174DB1013-Mild

€8.50

Brass lampholder cover for luminaire diameter 40mm

Tools and assembly accessories

Brass tube, diameter 14mm outside and 11mm inside - one metre long

Tube-laiton-Ø14mm-1m

€51.20

Brass tube for fixing bulb sockets, tube length 1 metre.

Tools and assembly accessories

Brass tube with 25mm external diameter and 22mm internal diameter - one metre long

Tube-laiton-Ø25mm-1m

€80.00

Brass tube for fixing bulb sockets, tube length 1 metre.

Tools and assembly accessories

Brass tube with 30mm external diameter and 27mm internal diameter - one metre long

Tube-laiton-Ø30mm-1m

€90.60

Brass tube for fixing bulb sockets, tube length 1 metre.

Tools and assembly accessories

Brass tube, diameter 16mm outside and 13mm inside - one metre long

Tube-laiton-Ø16mm-1m

€60.00

Brass tube for fixing bulb sockets, tube length 1 metre.

Tools and assembly accessories

Brass tube, external diameter 20mm and internal diameter 17mm - one metre long

Tube-laiton-Ø20mm-1m

€76.20

Brass tube for fixing bulb sockets, tube length 1 metre.

Tools and assembly accessories

Brass tube, diameter 18mm outside and 15mm inside - one metre long

Tube-laiton-Ø18mm-1-m

€66.40

Brass tube for fixing bulb sockets, tube length 1 metre.

Out-of-Stock

Tools and assembly accessories

Brass tube, diameter 14mm outside and 11mm inside - 50 centimetres long

Tube-laiton-Ø14mm-50cm

€25.60

Brass tube for fixing bulb sockets, tube length 50 centimetres.

View

Tools and assembly accessories

Brass tube 25mm outside diameter and 22mm inside diameter - 50 centimetres long

Tube-laiton-Ø25mm-50cm

€39.60

Brass tube for fixing bulb sockets, tube length 50 centimetres.

Tools and assembly accessories

Brass tube with 30mm external diameter and 27mm internal diameter - 50 centimetres long

Tube-laiton-Ø30mm-50cm

€45.60

Brass tube for fixing bulb sockets, tube length 50 centimetres.

Tools and assembly accessories

Brass tube, diameter 16mm outside and 13mm inside - 50 centimetres long

Tube-laiton-Ø16mm-50cm

€30.00

Brass tube for fixing bulb sockets, tube length 50 centimetres.

Tools and assembly accessories

Brass tube, diameter 20mm outside and 17mm inside - length 50 centimetres

Tube-laiton-Ø20mm-50cm

€38.20

Brass tube for fixing bulb sockets, tube length 50 centimetres.

Out-of-Stock

Tools and assembly accessories

Brass tube, diameter 18mm outside and 15mm inside - 50 centimetres long

Tube-laiton-Ø18mm-50cm

€33.40

Brass tube for fixing bulb sockets, tube length 50 centimetres.

View

Chain, cable, rope, ball and pendant

Self-locking block for suspending LED panels, quick adjustment - diameter 1.2 to 2.5mm

Bloc-auto-chrom-M10-1.2-2.5mm

€2.00

Self-locking block for cable suspension of LED panels

Chain, cable, rope, ball and pendant

Self-locking adjustment ball for suspension cable - cable diameter 1.2 to 2mm

Boule-auto1.2-2mm

€2.10

Self-locking cable holder, very useful for hanging small lights.

Self-locking adjustment block for suspension cable or electrical cable - diameter 1.6 to 2.7mm

Chain, cable, rope, ball and pendant

Self-locking adjustment block for suspension or electric cable - cable diameter 1.6 to...

Bloc auto1.6-2.7

€2.40

Self-locking cable holder, very useful for hanging small lights.

Chain, cable, rope, ball and pendant

M12 self-locking adjusting block for suspension or electric cable - cable diameter 2.2...

Bloc-chrom M12-2.2 à 3.5

€3.80

Self-locking cable holder, very useful for hanging small lights.

Chain, cable, rope, ball and pendant

Self-locking cable holder with 180° swivel for LED panel suspension

Bloc auto-180°

€4.00

Self-locking 180° swivelling cable holder for hanging LED panels

Brass lampholder Pizan diameter 40mm height 60mm

Rosette, bell, claw and socket cover

Valery brass lampholder cover for E27 lampholder - diameter 40mm height 50mm

DIY174DB1012-Valery

€8.50

Brass lampholder cover for luminaire diameter 40mm

Rosette, bell, claw and socket cover

Brass socket cover Suares diameter 40mm height 40mm

DIY174DB1021-Suares

€8.50

Brass lampholder cover for luminaire diameter 40mm

Rosette, bell, claw and socket cover

Renstahl brass socket cover diameter 40mm height 30mm

DIY174DB1020-Renstahl

€8.50

Brass lampholder cover for luminaire diameter 40mm

Rosette, bell, claw and socket cover

Pizan brass lampholder cover for E27 lamp holder - diameter 40mm height 60mm

DIY174DB1011-Pizan

€13.20

Brass lampholder cover for luminaire diameter 40mm

Rosette, bell, claw and socket cover

Perros brass lampholder cover for E27 lamp holder - diameter 40mm height 56mm

DIY174DB1014-Perros

€12.90

Brass lampholder cover for E27 porcelain lampholder

Rosette, bell, claw and socket cover

Pastre brass socket cover diameter 31mm height 50mm

DIY174DB1017-Pastre

€8.50

Brass lampholder cover for 31mm diameter luminaire

Rosette, bell, claw and socket cover

Keaton brass lampholder cover for E14 lamp holder - diameter 45mm height 61mm

DIY174DB1018-Keaton

€12.90

Brass lampholder cover for 45mm diameter luminaire

Rosette, bell, claw and socket cover

Brass socket cover Eleta diameter 56mm height 35mm

DIY174DB1015-Eleta

€16.90

Brass lampholder cover for 56mm diameter luminaire

Rosette, bell, claw and socket cover

Desnos brass lampholder with rolled edge diameter 43mm height 38mm

DIY174DB1019-Desnos

€9.95

Brass lampholder cover for luminaire diameter 43mm

Rosette, bell, claw and socket cover

Arvers brass lampholder cover for E14 lamp holder - diameter 33mm height 60mm

DIY174DB1016-Arvers

€9.96

Brass lampholder cover for 33mm diameter luminaire

Brass and bronze creation for luminaire

M4 threaded decorative brass ball cap nut

DIY095-204030

€1.00

Decorative ball-shaped brass cap nut used for the construction of brass chandeliers or light fittings.

Brass and bronze creation for luminaire

M4 decorative brass ball cap nut - hexagon socket

DIY095-204016-M4

€3.80

Decorative ball-shaped brass cap nut with hexagonal hexagon used for the construction of brass chandeliers or light fittings.

M5 threaded decorative brass ball cap nut

Brass and bronze creation for luminaire

M5 decorative brass ball cap nut - hexagon socket

DIY095-204016-M5

€3.80

Decorative ball-shaped brass cap nut with hexagonal hexagon used for the construction of brass chandeliers or light fittings.

Lamp and luminaire support

Arendt brass bell - square base 82mm x 82mm - octagonal

DIY170-Arendt

€22.60

Arendt brass horn for antique luminaire

Nut and washer

zinc-plated steel nut for M42 threaded tube, 3mm pitch, 21mm thick

écrou-zinc-M42mm

€10.20

Hexagonal nut in galvanised steel for assembling luminaires on M38 threaded hollow tube

M25 threaded tube, 2.0mm pitch - 100cm long

Tube and threaded accessory

Threaded tube in galvanised steel M38 with 3mm pitch - length 100cm

DIY-tube-M38x3mm

€143.00

Threaded tube in galvanised steel, M38 thread, 3mm pitch - 1 metre long.

Nut and washer

zinc-plated steel nut for M38 threaded tube, 3mm pitch, 19mm thick

écrou-zinc-M38mm

€9.20

Hexagonal nut in galvanised steel for assembling luminaires on M38 threaded hollow tube

Tube and threaded accessory

Threaded tube in galvanised steel M42 with 3mm pitch - length 100cm

DIY-tube-M42x3mm

€162.00

Threaded tube in galvanised steel, M42 thread, 3mm pitch - 1 metre long.

Tube and threaded accessory

1/4" inch galvanised steel threaded tube with 18G gas thread - 100cm long

DIY-tube-1/4-pouce-100cm

€33.90

1/4" inch galvanised steel threaded tube with gas thread - length 1 metre.

M10 thin tube in galvanised steel - from 15 to 60 millimetres for G4 base lamps

Tube and threaded accessory

M10 thin tube in galvanised steel, length from 15 to 60 millimetres for G4 cap lamp

M10-fin

€0.20

Hollow threaded rod sold individually in M10 standard with 1mm fine pitch for fixing small G9 lamp sockets. Choose the length you need from 15 to 60 millimetres.

Tube and threaded accessory

Threaded pipe in galvanised steel, 1/2" inch, 14G gas thread - 100cm long

DIY-tube-1/2-pouce-100cm

€39.90

1/2 inch galvanised steel threaded tube with gas thread - length 1 metre.

Tube and threaded accessory

1" inch galvanised steel threaded tube with 11G gas thread - 100cm long

DIY-tube-1-pouce-100cm

€74.50

Threaded tube in galvanised steel, 1 inch gas thread - length 1 metre.

Glassware, stoneware, designer lighting

30mm diameter, 130mm long pearl drop glassware - D11 base, G4 lamp

verrerie-goutte-D30mm-L130mm

€9.80

30mm diameter pearled drop glassware for D11 base and G4 lamp

Rosette, bell, claw and socket cover

Marina brass top-floor gazebo - diameter 99mm M10 tube passage

DIY167-hr2023-Marina

€17.10

Marina brass horn for antique luminaire

Electrical cable with four 3x0.3mm² conductors on transparent PVC sheath and Teflon-insulated cable

Electrical cable on transparent sheath

Round electrical cable with three 3x0.3mm² conductors on transparent PVC sheath and...

cable-3x-0.3mm

€3.00

Transparent three-core electrical cable with 0.3 mm² wires - length in 1 metre increments

Electrical cable on transparent sheath

Round electrical cable with four 4x0.3mm² conductors on transparent PVC sheath and...

cable-4x-0.3mm

€3.80

Transparent four-core electrical cable with 0.3mm² wires - length in one-metre variations

Electrical cable on transparent sheath

Round electrical cable with five 5x0.75mm² conductors on transparent PVC sheath and...

cable-5x-0.75mm

€7.20

Transparent five-core electrical cable with 0.75mm² wires - length in one-metre variations

White chromed steel cable clamp for M6 tube

Cable clamp, cable fastener, screws, interlock button

White chrome-plated steel cable clamp for M6 hollow threaded tube

Serre-câble-chromé-M6

€1.20

Cable clamp for M6 tube, 1mm pitch

Sockets, multipliers, risers, adapter sockets

E10 lamp holder on plastic mounting bracket

Douille-E10-base

€2.50

E10 socket mounted on a base with screw terminal block

Lampholder and base

Lampholder - E12 lamp base on wire - diameter 19mm cable length 33cm

Douille-E12-sur-fil

€2.00

Lamp socket E12

Lampholder - E10 lamp base on 23mm diameter wire

Lampholder and base

Lampholder - E10 lamp base on wire diameter 23mm cable length 24cm

Douille-E10-sur-fil

€1.90

E10 lamp holder

Product available with different options

Lampholder and base

Arthus lampholder in solid brass with G9 E12 or E14 base depending on version - double...

DIY173-Arthus

€17.88

E12 E14 or G9 lampholder in Arthus brass for a resolutely neo-retro style, ideal for Edison-style incandescent or LED filament lamps.

View

Rosette, bell, claw and socket cover

Soumi brass top-floor pavilion - diameter 53mm M10 tube passage

DIY167-hr2011-Soumi

€8.90

Soumi brass bell for antique luminaire

Rosette, bell, claw and socket cover

Sokorine brass tiered top horn - diameter 63mm M10 tube passage

DIY167-hr2012-Sokorine

€7.70

Sokorine brass horn for antique luminaire

Rosette, bell, claw and socket cover

Smila brass stepped top pavilion - diameter 73mm M10 tube passage

DIY167-hr2013-Smila

€10.10

Smila brass horn for antique luminaire

Romni brass top-floor pavilion - diameter 93mm M10 tube passage

Rosette, bell, claw and socket cover

Romni brass top-floor pavilion - diameter 80mm M10 tube passage

DIY167-hr2014-Romni

€10.90

Romni brass horn for antique luminaire

Rosette, bell, claw and socket cover

Odessa brass top-floor gazebo - diameter 93mm M10 tube passage

DIY167-hr2015-Odessa

€13.30

Brass Odessa horn for antique luminaire

Oblast brass top-floor horn - diameter 113mm M10 tube passage

Rosette, bell, claw and socket cover

Oblast brass top-floor horn - diameter 103mm M10 tube passage

DIY167-hr2016-Oblast

€15.70

Oblast brass horn for antique luminaire

Rosette, bell, claw and socket cover

Mariou brass tiered top pavilion - diameter 113mm M10 tube passage

DIY167-hr2017-Mariou

€19.20

Mariou brass horn for antique luminaire

Lazova brass tiered top pavilion - diameter 123mm M10 tube passage

Rosette, bell, claw and socket cover

Lazova brass top-floor pavilion - diameter 123mm M10 tube passage

DIY167-hr2018-Lazova

€25.20

Lazova brass horn for antique luminaire

Rosette, bell, claw and socket cover

Irpine brass top-floor pavilion - diameter 143mm M10 tube passage

DIY167-hr2019-Irpine

€30.00

Irpine brass horn for antique luminaire

Rosette, bell, claw and socket cover

Brianka brass stepped top pavilion - diameter 153mm M10 tube passage

DIY167-hr2020-Brianka

€36.00

Brianka brass horn for antique luminaire

Rosette, bell, claw and socket cover

Prodicio brass tiered top horn - diameter 72mm M10 tube passage

DIY171750960-Prodicio

€7.20

Prodicio brass horn for antique luminaire

Rosette, bell, claw and socket cover

Sivlady brass stepped top pavilion - diameter 51mm M10 tube passage

DIY171502020-Sivlady

€4.40

Sivlady brass horn for antique luminaire

Rosette, bell, claw and socket cover

Kurtis brass top-floor pavilion - diameter 62mm M10 tube passage

DIY171622020-Kurtis

€4.80

Kurtis brass horn for antique luminaire

Rosette, bell, claw and socket cover

Clotaire brass stepped top pavilion - diameter 59mm M10 tube passage

DIY1715624020-Clotaire

€5.90

Clotaire brass bell for antique luminaire

Rosette, bell, claw and socket cover

Clodomir brass top-floor pavilion - diameter 72mm M10 tube passage

DIY171732150-clodomir

€6.60

Clodomir brass bell for antique luminaire

Rosette, bell, claw and socket cover

Neith brass bell - diameter 101mm M10 tube passage

DIY17210025-Neith

€13.20

Neith brass horn for antique luminaire

Hathor brass bell - diameter 188mm M10 threaded tube passage

Rosette, bell, claw and socket cover

Hathor brass bell - diameter 188mm M10 tube passage

DIY17218555-hathor

€65.70

Hathor brass pavilion for antique luminaire

Rosette, bell, claw and socket cover

Maïa brass bell - diameter 164mm M10 tube passage

DIY17216445-Maïa-164

€49.90

Maïa brass pavilion for antique luminaire

Rosette, bell, claw and socket cover

Shani brass bell - diameter 170mm M10 tube passage

DIY17217545-Shani

€52.50

Shani brass horn for antique luminaire

Socket, socket cover, spool, dummy plug, cable clamp

Tehanie brass wick for chandeliers or candleholders - candle diameter 24mm

DIY169-LST001

€25.30

Tehanie brass wick for chandelier, lamp or candlestick 34mm outer diameter for M10 threaded tube

Brass Poema wick for chandelier, lamp or candleholder diameter 27mm

Out-of-Stock

Socket, socket cover, spool, dummy plug, cable clamp

Brass Poema wick for chandelier, lamp or candle holder - candle diameter 27mm

DIY169-LST002

€25.50

Nausicaa brass wick for chandelier, lamp or candleholder external diameter 40mm M10 threaded

View

Socket, socket cover, spool, dummy plug, cable clamp

Brass Nausicaa wick for chandeliers or candlesticks - candle diameter 22mm

DIY169-LST005

€16.50

Nausicaa brass wick for chandelier, lamp or candlestick 30mm outer diameter M10 threaded

Socket, socket cover, spool, dummy plug, cable clamp

Felia brass wick for chandelier, lamp or candlestick - candle diameter 27mm

DIY169-LST006

€20.50

Felia brass wick for chandelier, lamp or candlestick 35mm outer diameter for M10 threaded tube

Socket, socket cover, spool, dummy plug, cable clamp

Brass Athena wick for chandeliers or candlesticks - 24mm diameter candle

DIY169-LST004

€26.50

Athena brass wick for chandelier, lamp or candlestick 38mm outer diameter for M10 threaded tube

Socket, socket cover, spool, dummy plug, cable clamp

Astrée brass wick for chandelier, lamp or candle holder - candle diameter 27mm

DIY169-LST003

€25.90

Astrée brass wick for chandelier, lamp or candlestick 34mm external diameter M10 thread

Rosette, bell, claw and socket cover

Stilpon brass lamp base - square base 118mm

DIY170-MST8014-16558

€104.00

Stilpon brass square foot for antique light fitting

Rosette, bell, claw and socket cover

Mégare brass lamp base - tripod base 130mm

DIY170-MST8015-13098

€92.00

Mégare brass horn with tripod base for antique light fitting

Rosette, bell, claw and socket cover

Lamp base in Diodore brass - on square base 155mm long

DIY170-MST8016-155117

€182.00

Diodore brass horn for antique luminaire

Tools and assembly accessories

Brass tube 12mm outside diameter and 8.4mm inside diameter - 50 centimetres long

Tube-laiton-Ø12mm-50cm

€18.00

Brass tube for fixing bulb sockets, tube length 50 centimetres.

Tools and assembly accessories

Brass tube with 12mm outer diameter and 8.4mm inner diameter - 1 metre long

Tube-laiton-Ø12mm-inpetit-1m

€34.70

Brass tube for fixing bulb sockets, tube length 1 metre.

Rosette, bell, claw and socket cover

Straton brass lamp base - three different sizes on square base 160, 130, 95mm

pied-laiton-Straton

€47.18

Straton brass horn for antique luminaire

Rosette, bell, claw and socket cover

Archytas brass rosette bell - three different sizes, diameter 105, 118, 133mm

pavillon-laiton-Archytas

€34.13

Archytas brass horn for antique luminaire

Tools and assembly accessories

Brass tube 12mm outside diameter and 9.9mm inside diameter - 1 metre long

Tube-laiton-Ø12mm-1m

€33.70

Brass tube for fixing bulb sockets, tube length 1 metre.

Socket, socket cover, spool, dummy plug, cable clamp

Oncidium brass wick for chandelier, lamp or candle holder diameter 122mm for M10...

DIY170-MST1114-12029

€39.50

Oncidium brass wick for chandeliers or candleholders diameter 122mm for M10 threaded tube

Socket, socket cover, spool, dummy plug, cable clamp

Rafflesia brass wick for chandelier, lamp or candlestick diameter 122mm for M10...

DIY170-MST1118-12351

€33.90

Rafflesia brass wick for chandelier lamp or candlestick diameter 122mm for M10 threaded tube

Brass sleeve drilled to 10.5mm diameter for installation on threaded pipes - height 54mm

Lampshade, luminaire attachment, luminaire body

Brass sleeve diameter 15.5mm drilled to diameter 10.5mm - height 54mm

DIY105236008

€5.40

A decorative brass element for assembling the luminaires, allowing cables to pass through on M10 hollow rods.

Lampshade, luminaire attachment, luminaire body

Threaded brass sleeve M10 diameter 15.5mm for installation on threaded pipes - height 54mm

DIY105228041

€5.80

A decorative brass element for assembling the luminaires, allowing cables to pass through on M10 hollow rods.

Lampshade, luminaire attachment, luminaire body

Brass sleeve, external diameter 21mm, drilled diameter 10.5mm - height 50mm

DIY105228015

€9.80

A decorative brass element for assembling luminaires, allowing cables to pass through hollow rods.

Socket, socket cover, spool, dummy plug, cable clamp

Endely brass wick for chandelier, lamp or candle holder diameter 28mm for M10 threaded...

DIY105224034

€8.30

Brass wick for chandelier, lamp or candle holder diameter 28mm for M10 threaded tube

Lampshade, luminaire attachment, luminaire body

22.5mm diameter brass ball socket with three M10 tapped outlets - 24mm high

DIY105221048

€6.90

This ball-shaped brass sleeve has three M10 threads for passing cables at 90°.

Lampshade, luminaire attachment, luminaire body

Brass sleeve, diameter 29.5mm, drilled through to diameter 13mm plus M10 tapping

DIY105221028

€18.70

This ball-shaped brass sleeve has three holes for passing cables at 90°.

Lampshade, luminaire attachment, luminaire body

29mm diameter brass ball socket with three M10 threaded outlets - height 24.5mm

DIY105221027

€11.70

This ball-shaped brass sleeve has three threads for 90° cable routing.

Lampshade, luminaire attachment, luminaire body

29.5mm diameter brass ball socket with three M10 tapped outlets

DIY105221016

€10.50

This ball-shaped brass sleeve has three threads for 90° cable routing.

Lampshade, luminaire attachment, luminaire body

18.5 mm diameter brass ball socket with three M10 threaded outlets

DIY105221005

€4.60

This ball-shaped brass sleeve has three threads for 90° cable routing.

Lampshade, luminaire attachment, luminaire body

27.5mm diameter M10 threaded ball-shaped brass luminaire tip

DIY105220021

€10.00

A decorative element for assembling M10 brass luminaires and chandeliers.

Lampshade, luminaire attachment, luminaire body

34mm diameter M10 threaded brass luminaire tip, hat shape

DIY105219047

€16.00

A decorative element for assembling M10 brass luminaires and chandeliers.

Lampshade, luminaire attachment, luminaire body

Brass sleeve, external diameter 26.5mm, drilled diameter 13mm - height 38mm

DIY105219044

€10.70

A decorative brass element for assembling luminaires, allowing cables to pass through hollow rods.

Lampshade, luminaire attachment, luminaire body

Brass sleeve with 30 mm external diameter and M10 thread - height 24 mm

DIY105219033

€13.70

A decorative brass element for assembling luminaires, allowing cables to pass through hollow rods.

Lampshade, luminaire attachment, luminaire body

Brass sleeve with 27.5 mm external diameter and M10 thread - height 21 mm

DIY105219020

€10.10

A decorative brass element for assembling luminaires, allowing cables to pass through hollow rods.

Lampshade, luminaire attachment, luminaire body

Brass sleeve, external diameter 27mm, drilled diameter 14mm, height 16mm

DIY105219018

€5.90

A decorative brass element for assembling luminaires, allowing cables to pass through hollow rods.

Lampshade, luminaire attachment, luminaire body

Brass sleeve, external diameter 29.5mm, drilled diameter 10mm - height 24mm

DIY105219016

€12.00

A decorative brass element for assembling luminaires, allowing cables to pass through hollow rods.

Lampshade, luminaire attachment, luminaire body

Brass sleeve, external diameter 29.5mm, drilled diameter 15mm - height 22.5mm

DIY105219013

€10.50

A decorative brass element for assembling luminaires, allowing cables to pass through hollow rods.

Brass sleeve, external diameter 24.5mm, M10 threaded

Lampshade, luminaire attachment, luminaire body

Brass sleeve, external diameter 24.5mm, M10 thread - height 20mm

DIY105219012

€6.20

A decorative brass element for assembling luminaires, allowing cables to pass through hollow rods.

Lampshade, luminaire attachment, luminaire body

Brass sleeve, external diameter 22mm, drilled diameter 13mm - height 25mm

DIY105219005

€4.50

A decorative brass element for assembling luminaires, allowing cables to pass through hollow rods.

Lampshade, luminaire attachment, luminaire body

Brass sleeve, external diameter 18mm, drilled diameter 15mm - height 33mm

DIY105219002

€4.00

A decorative brass element for assembling luminaires, allowing cables to pass through hollow rods.

Lampshade, luminaire attachment, luminaire body

Brass sleeve, external diameter 33.5mm, drilled diameter 16mm - height 39mm

DIY105209072

€19.80

A decorative brass element for assembling luminaires, allowing cables to pass through hollow rods.

Lampshade, luminaire attachment, luminaire body

Threaded brass sleeve M10 diameter 20mm for installation on threaded pipes - height 20mm

DIY104208003

€3.29

A decorative brass element for assembling the luminaires, allowing cables to pass through on M10 hollow rods.

Threaded brass sleeve M10 diameter 17mm for - height 16mm

Lampshade, luminaire attachment, luminaire body

Threaded brass sleeve M10 diameter 17mm for installation on threaded pipes - height 16mm

DIY104208040

€2.20

A decorative brass element for assembling the luminaires, allowing cables to pass through on M10 hollow rods.

Brass sleeve diameter 24mm drilled at 10.5mm for installation on threaded pipes - height 22mm

Lampshade, luminaire attachment, luminaire body

Brass sleeve diameter 24mm drilled to diameter 10.5mm for installation on threaded...

DIY104208024

€6.50

A decorative brass element for assembling the luminaires, allowing cables to pass through on M10 hollow rods.

Lampshade, luminaire attachment, luminaire body

Brass sleeve diameter 24mm drilled to diameter 10.5mm for installation on threaded...

DIY104208023

€4.70

A decorative brass element for assembling the luminaires, allowing cables to pass through on M10 hollow rods.

Brass sleeve diameter 23mm drilled diameter 10.5mm - height 10mm

Lampshade, luminaire attachment, luminaire body

Brass sleeve diameter 23mm drilled to diameter 10.5mm for installation on threaded...

DIY104208018

€3.80

A decorative brass element for assembling the luminaires, allowing cables to pass through on M10 hollow rods.

Lampshade, luminaire attachment, luminaire body

20 mm diameter brass sleeve with 10.5 mm diameter holes for installation on threaded...

DIY104208015

€3.40

A decorative brass element for assembling the luminaires, allowing cables to pass through on M10 hollow rods.

Lampshade, luminaire attachment, luminaire body

Brass knob diameter 16mm M6 threaded - height 15mm

DIY104208013

€3.35

A decorative brass element for assembling the luminaires.

10.5 mm diameter smooth brass sleeve for installation on threaded pipes - height 15 mm

Lampshade, luminaire attachment, luminaire body

Brass sleeve drilled to 10.5mm diameter for installation on threaded pipes - height 15mm

DIY104208010

€1.40

A decorative brass element for assembling the luminaires, allowing cables to pass through on M10 hollow rods.

Lampshade, luminaire attachment, luminaire body

Threaded brass sleeve M10 diameter 24mm for installation on threaded pipes - height 10mm

DIY104208009

€3.60

A decorative brass element for assembling the luminaires, allowing cables to pass through on M10 hollow rods.

Lampshade, luminaire attachment, luminaire body

Threaded brass sleeve M10 diameter 20mm for installation on threaded pipes - height 10mm

DIY104208005

€1.90

A decorative brass element for assembling the luminaires, allowing cables to pass through on M10 hollow rods.

Lampshade, luminaire attachment, luminaire body

M10 threaded brass sleeve, 14 mm diameter, for installation on threaded pipes - 15 mm high

DIY104208001

€1.40

A decorative brass element for assembling the luminaires, allowing cables to pass through on M10 hollow rods.

Threaded brass sleeve M10 diameter 30mm for - height 18mm

Lampshade, luminaire attachment, luminaire body

Threaded brass sleeve M10 diameter 30mm for installation on threaded pipes - height 18mm

DIY104207015

€6.20

A decorative brass element for assembling the luminaires, allowing cables to pass through on M10 hollow rods.

23 mm diameter M10 threaded brass sleeve for installation on threaded pipe

Lampshade, luminaire attachment, luminaire body

23 mm diameter M10 threaded brass sleeve for installation on M10 threaded pipe - height...

DIY104207021

€4.50

A decorative brass element for assembling the luminaires, allowing cables to pass through on M10 hollow rods.

Column, tube, ball, luminaire tip, suspension ring

Brass ball, diameter 10mm, M5 threaded, non-through-hole

DIY103229002-M5-Ø10mm

€1.20

Solid brass ball with M5 thread for assembling hollow polishing rods

17.5mm diameter brass ball with M10 thread

Out-of-Stock

Column, tube, ball, luminaire tip, suspension ring

17.5mm diameter brass ball with 1mm pitch M10 non-through thread

DIY103229011-M10-Ø17.5mm

€2.33

Solid brass ball with M10 thread for assembling hollow polishing rods

View

Column, tube, ball, luminaire tip, suspension ring

Brass ball, diameter 16mm, M10 threaded, 1mm pitch, non-through hole

DIY103229015-M10-Ø16mm

€1.60

Solid brass ball with M10 thread for assembling hollow polishing rods

Column, tube, ball, luminaire tip, suspension ring

10mm diameter brass ball with M4 non-through thread

DIY103229014-M4-Ø10mm

€1.00

Solid brass ball with M4 thread for assembling hollow polishing rods

Column, tube, ball, luminaire tip, suspension ring

12mm diameter brass ball with 1mm pitch M6 non-through thread

DIY103229017-M6-Ø12mm

€1.00

12 mm diameter solid brass ball with M6 thread for assembling hollow rods for chandeliers

20mm diameter brass ball with M12 thread

Column, tube, ball, luminaire tip, suspension ring

Brass ball, diameter 20mm, M12 threaded, 1mm pitch, non-through hole

DIY103229021-M12-Ø20mm

€3.20

20 mm diameter solid brass ball with M12 thread for assembling hollow polishing rods

Column, tube, ball, luminaire tip, suspension ring

21.5mm diameter brass ball with M4 non-through thread

DIY103229031-M4-Ø21.5mm

€6.50

Solid brass ball with M4 thread for assembling hollow polishing rods

Brass ball diameter 19.5mm through hole diameter 6mm

Column, tube, ball, luminaire tip, suspension ring

19.5mm diameter brass ball with 6mm diameter through-hole

DIY103229040-T6-Ø19.5mm

€4.36

Solid brass ball with 6mm diameter hole for assembling hollow polishing rods

25mm diameter brass ball with M12 thread

Column, tube, ball, luminaire tip, suspension ring

Brass ball, diameter 25mm, M12 threaded, 1mm pitch, non-through hole

DIY103229043-M12-Ø25mm

€8.10

25 mm diameter solid brass ball with M12 thread for assembling hollow polishing rods

Column, tube, ball, luminaire tip, suspension ring

10mm diameter brass ball with M3 non-through thread

DIY103229056-M3-Ø10mm

€0.70

10 mm diameter solid brass ball with M3 thread for assembling hollow polishing rods

Column, tube, ball, luminaire tip, suspension ring

7.5mm diameter brass ball with M4 non-through thread

DIY103229001-M4-Ø7.5mm

€0.60

7.5mm diameter solid brass ball with M4 thread for assembling hollow polishing rods

Column, tube, ball, luminaire tip, suspension ring

6mm diameter brass ball with M3 non-through thread

DIY103229007-M3-Ø6mm

€0.45

6 mm diameter solid brass ball with M3 thread for assembling hollow polishing rods

M6 zinc-plated steel screw without hollow hexagonal head - thread length according to variation

Cable clamp, cable fastener, screws, interlock button

M6 stainless steel screws without hollow hexagonal head - sold in packs of 10 - thread...

vis-inox-m6-HC

€0.70

201 - M6 stainless steel screws for luminaire assembly

Plastic end cap to protect electrical cable for M10 threaded tube

Tube and threaded accessory

Plastic end cap to protect electrical cable for M12 threaded tube

embout-plas-m12

€0.22

Plastic end cap to protect electrical cable for M12 threaded tube

Tools and connectors

Clamp for bulkhead terminal Strain relief cable feed-through

Pince-Borne-cloison

€16.80

Clamp for bulkhead terminal.

Cable clamp, cable fastener, screws, interlock button

Partition bollard for flat cable with strain relief - cable size according to declination

Borne-cloison-rond

€1.20

Black plastic grommet for bulkheads.

M10 brass threaded tube, 1mm pitch, 35mm long

Tools and assembly accessories

M10 brass threaded tube, 1mm pitch - 50mm long

DIY-146-50mm

€2.80

Hollow solid brass threaded rod sold individually in M10 standard with 1mm fine pitch for fixing bulb sockets.

Tools and assembly accessories

M10 brass threaded tube, 1mm pitch - 40mm long

DIY-146-40mm

€2.50

Hollow solid brass threaded rod sold individually in M10 standard with 1mm fine pitch for fixing bulb sockets.

Tube and threaded accessory

Plastic protection ring for bulkhead passage - diameter depending on version

Bag-plast-

€0.18

Transparent plastic grommet for bulkheads.

Chain, cable, rope, ball and pendant

4 metre roll of twisted brass wire - wire diameter 0.66mm to 1mm depending on declination

Rouleau-fil-laiton-tor

€7.16

Twisted brass wire for fixing and constructing luminaires.

Chain, cable, rope, ball and pendant

10 metre roll of brass wire - wire diameter 0.4mm to 2mm depending on declination

Rouleau-fil-laiton

€4.56

Brass wire for fixing and building luminaires.

Roll of 500 metres of stainless steel wire, diameter 0.5mm

Chain, cable, rope, ball and pendant

Roll of 500 metres of stainless steel wire - cable diameter 0.5mm

Rouleau-fil-acier-inox

€118.50

Stainless steel cable for fixing and building luminaires.

Chain, cable, rope, ball and pendant

Roll of 500 metres of gold or chrome-coloured link - PVC-coated metal wire, 4mm wide

Rouleau-fil-gainé

€34.50

These gold or silver-coloured ties are ideal for fixing electrical cables to old bronze and brass light fittings.

Tube and threaded accessory

M10 threaded transparent plastic cable gland, length 12mm

Passe-cable-transparent

€0.18

M10 threaded transparent plastic cable gland

Tube and threaded accessory

White rubber cable gland - size depending on version

Passe-cable-blanc

€0.25

White rubber grommet, size according to selected version

Tube and threaded accessory

Black rubber cable gland - size depending on version

Passe-cable-noir

€0.25

Black rubber grommet, size according to selected version

Glassware, stoneware, designer lighting

Double globes frosted glassware in diameter 100mm for D11 base and G4 lamp

Verre-double-globe-depoli-100-D11

€41.00

Frosted globe glass, diameter 100 mm for G4 lamp on D11 lampholder.

Out-of-Stock

Glassware, stoneware, designer lighting

Double globes frosted glassware in diameter 80mm for D11 base and G4 lamp

Verre-double-globe-depoli-80-D11

€19.40

80 mm diameter frosted globe glass for G4 lamp on D11 lampholder.

View

Glassware, stoneware, designer lighting

Double amber chrome globes in 80mm diameter for D11 base and G4 lamp

Verre-double-globes-ambre-80-D11

€19.40

Double amber chrome globes in 80mm diameter for G4 lamp on D11 socket.

Shaft leaf glassware in black chrome for D11 base and G4 lamp

Glassware, stoneware, designer lighting

Glassware with black chrome shaft in diameter 70mm for D11 base and G4 lamp

feuille-arbre-noir-D11

€8.60

70 mm diameter black chromed shaft glass for G4 lamp on D11 lampholder.

Glassware, stoneware, designer lighting

Tree leaf glassware in amber chrome in diameter 70mm for D11 base and G4 lamp

feuille-arbre-ambre-D11

€8.60

Tree leaf glassware in amber chrome in 70mm diameter for G4 lamp on D11 socket.

Transparent tree leaf glass for D11 base and G4 lamp

Glassware, stoneware, designer lighting

Transparent shaft glassware in diameter 70mm for D11 base and G4 lamp

feuille-arbre-trans-D11

€8.60

Transparent 70mm diameter tree leaf glass for G4 lamp on D11 socket.

Tree leaf glassware for D11 base and G4 lamp

Glassware, stoneware, designer lighting

70mm diameter frosted shaft glass for D11 base and G4 lamp

feuille-arbre-depoli-D11

€8.60

70mm diameter frosted shaft glass for G4 lamp on D11 lampholder.

Glassware, stoneware, designer lighting

50mm diameter frosted globe glass for D11 base and G4 lamp

Verrerie-globe-depoli-50mm-D11

€8.60

50 mm diameter frosted globe glass for G4 lamp on D11 lampholder.

Out-of-Stock

Glassware, stoneware, designer lighting

Transparent globe glassware in 50mm diameter for D11 base and G4 lamp

Verrerie-globe-trans-50mm-D11

€8.60

Transparent globe glassware, diameter 50mm, for G4 lamp on D11 socket.

View

M4 brass knurled slotted head screw - thread length 14mm

Cable clamp, cable fastener, screws, interlock button

M4 brass screw with knurled and slotted cylindrical head, thread length 14mm

DIY090216013-2

€1.60

Screws and bolts for brass luminaire assembly

Brass telescopic tube for luminaire on M10 threaded tube - pole length 108cm

Tube and threaded accessory

Brass telescopic tube for luminaire on M10 threaded tube with locking screw - pole...

Tube-telescopique-laiton-DIY162

€188.20

Telescopic tube in solid brass with M10 thread for assembling luminaires on hollow rods

Tube and threaded accessory

11.5mm diameter brass tube with M10 thread - length depending on declination, 5cm, 7cm,...

DIY160

€6.00

Brass tube for fixing lamp holders to luminaires.

M10 threaded brass tube - diameter 11.5mm - length depending on declination

Tube and threaded accessory

Brass-look steel tube, diameter 11.5mm, M10 threaded - length depending on the...

DIY159

€4.52

Brass-look steel tube for fixing lamp holders to luminaires.

Brass tube, elbow to elbow - length 340cm with M10 thread

Out-of-Stock

Tube and threaded accessory

Brass tube, elbow to elbow - length 340cm with M10 thread

DIY1581130

€66.90

Double elbow gooseneck brass tube for fixing lamp holders to luminaires.

View

Tube and threaded accessory

90° brass tube - length 17cm / 7.5cm with M10 thread

DIY1581127

€29.60

Brass tube, diameter 11.5 mm, 90° bend, for attaching lamp holders to luminaires.

Tube and threaded accessory

90° brass tube - length 15cm / 5.5cm with M10 thread

DIY1581125

€26.00

Brass tube, diameter 11.5 mm, 90° bend, for attaching lamp holders to luminaires.

Tube and threaded accessory

90° brass tube - length 10.5cm / 5.5cm with M10 thread

DIY1581126

€19.90

Brass tube, diameter 11.5 mm, 90° bend, for attaching lamp holders to luminaires.

Tube and threaded accessory

Double elbow gooseneck brass tube - length 23cm M10 threaded

DIY1581128

€42.70

Double elbow gooseneck brass tube for fixing lamp holders to luminaires.

Tube and threaded accessory

90° gooseneck brass tube - length 22.5cm / 9.5cm threaded M10 on spigot collar

DIY1571132

€28.50

Double elbow gooseneck brass tube for fixing lamp holders to luminaires.

Tube and threaded accessory

90° gooseneck brass tube - length 18cm / 9.5cm M10 threaded on spigot collar

DIY1571131

€24.60

Double elbow gooseneck brass tube for fixing lamp holders to luminaires.

Tube and threaded accessory

180° gooseneck brass tube - height 13cm threaded M10 on spigot collar

DIY1571134

€25.50

Brass gooseneck tube bent at 180° for fixing lamp holders to luminaires.

Tube and threaded accessory

90° gooseneck brass tube - length 9cm / 8.5CM threaded M10 on beaten collar

DIY1571130

€20.50

Double elbow gooseneck brass tube for fixing lamp holders to luminaires.

Double elbow gooseneck brass tube - length 16cm

Tube and threaded accessory

Double elbow gooseneck brass pipe - length 16cm threaded M10 on spigot collar

DIY1571133

€29.50

Double elbow gooseneck brass tube for fixing lamp holders to luminaires.

Tube and threaded accessory

180° gooseneck brass tube - height 18.5cm M10 threaded on beaten collar

DIY1571135

€31.50

Brass gooseneck tube bent at 180° for fixing lamp holders to luminaires.

Tube and threaded accessory

Plastic end cap to protect electrical cable for M10 threaded tube

embout-plas-m10

€0.20

Plastic end cap to protect electrical cable for M10 threaded tube

Stainless steel clevis bracket for ball link chain

Lighting and lighting design

Chrome-plated steel clevis bracket for ball link chain - diameter depending on version

Fixation chape

€1.20

A 6 mm diameter silver-coloured metal ball chain for hanging or securing small objects.

Flat electrical cable on transparent PVC sheath with two 0.5 mm² silver-plated copper conductors

Electrical cable on transparent sheath

Flat electrical cable on transparent PVC sheath with two 0.3mm² silver-plated copper...

cable-plat-0.3mm²-silver

€2.20

Electrical flat cable with two silver-plated copper conductors, with 0.3mm² wires - length in one-metre increments

Double-arm stainless steel leaf spring on cable

Ring, hook, ball joint and spring

Stainless steel leaf spring with two arms on cable - length 50mm

Ressort-cable-50mm

€1.20

Leaf spring on cable, total length 50mm, for recessed luminaires.

Ring, hook, ball joint and spring

M10 stainless steel leaf spring with retaining claw - length 98mm

Ressort-grif-lame-98mm

€1.25

Leaf spring on M10 rod, 98 mm total length, for recessed luminaires.

Stainless steel leaf spring on M10 rod - length 98mm

Ring, hook, ball joint and spring

Stainless steel leaf spring with two arms on M10 rod - length 98mm

Ressort-lame-98mm

€1.20

Leaf spring on M10 rod, 98 mm total length, for recessed luminaires.

Ring, hook, ball joint and spring

Stainless steel leaf spring with two arms on M10 rod - length 70mm

Ressort-lame-70mm

€1.20

Leaf spring on M10 rod, total length 70mm, for recessed luminaires.

Stainless steel leaf spring on M10 shank, length 50mm

Ring, hook, ball joint and spring

Stainless steel leaf spring with two arms on M10 rod - length 50mm

Ressort-lame-50mm

€1.20

Leaf spring on M10 rod, total length 50 mm, for recessed luminaires.

Ring, hook, ball joint and spring

Stainless steel leaf spring with two arms on M10 rod - length 42mm

Ressort-lame-42mm

€1.20

Leaf spring on M10 rod, total length 42mm, for recessed luminaires.

Ring, hook, ball joint and spring

Stainless steel leaf spring with two arms on M10 rod - length 33mm

Ressort-lame-33mm

€1.20

Leaf spring on M10 rod, total length 33mm, for recessed luminaires.

Ring, hook, ball joint and spring

Curved spring clamp with two arms on M10 rod, arm length 120mm

Ressort-bras-incurvé-120mm

€1.20

120 mm diameter spring for all recessed luminaires.

Lamp cord with switch

230 volt power cord with black foot switch - red fabric braid

Cordon-pied-rouge

€14.95

Cable for luminaire power supply with push-button switch

230 volt power cord with foot switch black and white tiger fabric braid

Lamp cord with switch

230 volt power cord with black foot switch - black and white tabby braided fabric

Cordon-pied-B&W

€14.95

Cable for luminaire power supply with push-button switch

Chrome-plated washer with straight edge - internal diameter from 13mm to 44mm

Tools and assembly accessories

Chrome-plated washer with straight edge - inside diameter from 13mm to 44mm - in 8...

Rondelle-chrome-droit

€2.16

Chromium-plated washers with straight edge, choose the diameter you need from the range.

Sockets, multipliers, risers, adapter sockets

M8 threaded D11 socket for G4 lamp with spring retainer for luminaire

D11-G4-chrome-m8

€2.90

This G4 lamp holder lets you easily install small G4 light sources on M8 threaded rods with a 1mm pitch.

Black plastic E12 socket - spring-mounted

Lampholder and base

Lampholder for E12 base in black plastic - spring-mounted

Douille-lisse-E12

€2.50

E12 lampholder in self-extinguishing black plastic for incandescent, halogen or low-energy lamps,

Chain, cable, rope, ball and pendant

Self-locking block for suspending LED panels, quick adjustment - cable diameter 2.0 to...

Bloc-auto-chrom-M10-2-3.3mm

€2.20

Self-locking block for cable suspension of LED panels

Ring, hook, ball joint and spring

Retaining spring on socket for M10 threaded tube, for mounting glassware or light fittings

ressort-douille-M10

€2.90

Retaining spring on M10 threaded tube

Sockets, multipliers, risers, adapter sockets

Mini G4 ceramic base with single connection cable and earth connection

Mini culot-G4-céramique

€1.40

A mini G4 ceramic base on a bare wire for G4 halogen lamps or low-voltage G4 LED bulbs.

Nut and washer

low zinc-plated nut 3/4 inch thread Gaz 14G for threaded tube nominal diameter 26.4mm

écrou-zinc-3/4-14G

€3.50

Low zinc-plated steel nuts are perfect for assembling light fittings and chandeliers mounted on 3/4" hollow rods.

Lampholder and base

E12 porcelain mini socket on M10 hollow threaded rods

mini-Douille-E12-M10

€3.90

E12 porcelain socket with support for M10 hollow threaded rods

Out-of-Stock

Sockets, multipliers, risers, adapter sockets

Porcelain base for G9 lamp with M20.8 thread - two Grip-connectors

culot-G9-filtage-2G

€3.50

Porcelain base for G9 lamp with M20.8 thread - Grip-connect for halogen or LED bulbs

View

Sockets, multipliers, risers, adapter sockets

Porcelain base for G9 lamp with M20.8 thread - four Grip-connect

culot-G9-filtage-4G

€3.60

Porcelain base for G9 lamp with M20.8 thread - Grip-connect for halogen or LED bulbs

Out-of-Stock

Ring, hook, ball joint and spring

Retaining spring on threaded sleeve for G9 base, for mounting on glassware or luminaire

ressort-douille

€1.90

Retaining spring on G9 threaded bushing

View

Sockets, multipliers, risers, adapter sockets

E40 lampholder in zamac for lamp with fixing bell

Douille-E40- Zamac-anneau

€14.20

E40 lampholder in zamac mounted on bell for lamp fitted with E40 lampholder

Sockets, multipliers, risers, adapter sockets

E27 lampholder in zamac for lamp with fixing bell

Douille-E27- Zamac-pavillon

€10.90

E27 lampholder in zamac mounted on bell for lamp fitted with E27 lampholder

Sockets, multipliers, risers, adapter sockets

E27 lampholder in zamac for lamp with suspension ring

Douille-E27- Zamac-anneau

€9.90

E27 lampholder in zamac with suspension ring for lamp with E27 lampholder

Brass and bronze creation for luminaire

Decorative cylindrical brass plug with 13mm diameter and M10 thread for lighting fittings

DIY097209022-CD

€1.45

Decorative cylindrical brass stopper used in the construction of brass chandeliers or light fittings.

Power cable and extension lead

Socket 230 volts 2 poles - 2.5 amps colour black

prise-mâle-femelle-N-230V-P 2.5A

€5.00

Socket for 230-volt high-power electrical equipment

Power cable and extension lead

Socket 230 volts 2 poles - 2.5 amps colours white

prise-mâle-femelle-B-230V-P 2.5A

€5.00

Socket for 230-volt high-power electrical equipment

Brass suspension ring 46mm x 18mm opening - M10 thread

Ring, hook, ball joint and spring

Large cast brass suspension ring 46mm x 18mm M10 thread

DIY147-anneau-UB

€10.50

M10 brass threaded ring with 1mm pitch for fixing luminaires

Alflora brass spool for chandelier lamp or candlestick diameter 122mm

Socket, socket cover, spool, dummy plug, cable clamp

Alflora brass wick for chandelier, lamp or candle holder diameter 122mm for M10...

Bobèche Alflora en laiton

€19.30

Alflora brass wick for chandelier, lamp or candle holder diameter 122mm for M10 threaded tube

Socket, socket cover, spool, dummy plug, cable clamp

Dryade brass spool for chandelier, lamp or candlestick diameter 100mm for M10 threaded...

Bobèche Dryade en laiton

€19.30

Dryade brass wick for chandelier, lamp or candlestick diameter 100mm for M10 threaded tube

Socket, socket cover, spool, dummy plug, cable clamp

Romuléa brass spool for chandelier, lamp or candlestick diameter 102mm for M10 threaded...

Romulea-Bobèche

€32.50

Romuléa brass wick for chandelier, lamp or candlestick diameter 102mm for M10 threaded tube

Rosette, bell, claw and socket cover

Swallow brass bell - diameter 75mm M10 tube passage

pavillon-laiton-Swallow

€12.90

Brass Swallow horn for antique luminaire

Rosette, bell, claw and socket cover

Nebula brass bell - diameter 160mm M10 tube passage

pavillon-laiton-Nebula

€32.90

Nebula brass bell for antique luminaire

Low zinc-plated nut for M8 tube, 1mm pitch, 3mm thick

Tube and threaded accessory

Low zinc-plated nut for M6 tube, 1mm pitch, 4.5mm thick

écrou-zinc-M6-4.5mm

€0.15

Low zinc-plated steel nuts are perfect for assembling light fittings and chandeliers mounted on M6 hollow rods.

Threaded tube M8 length from 1 to 10 cm an accessory for luminaire

Tube and threaded accessory

Threaded tube M6 1mm pitch length from 1 to 10 cm an accessory for luminaire

DIY-058-M6

€0.23

Hollow threaded rod sold individually in M6 standard with 1mm fine pitch for fixing bulb sockets. Choose the length you need from our range, available in this advert in lengths from 1cm to 10cm.

Zinc-plated steel ring nut diameter M28 2mm pitch

Tube and threaded accessory

Threaded zinc-plated steel ring nut M28mm with 2mm pitch for G9 GU10 base

écrou-acier-M28

€1.80

Zinc-plated steel ring nut diameter M28 2mm pitch

Smooth cable clamp, choice of colours, cable passage diameter 2.4mm

Cable clamp, cable fastener, screws, interlock button

Smooth cable clamp, choice of colours 2.4mm cable diameter

Serre-câble-lisse-2.4mm

€2.00

Greenhouses with lamp cables and chandelier pavilions

Cable clamp, cable fastener, screws, interlock button

Smooth cable clamp, choice of colours 4.3mm cable diameter

Serre-câble-lisse-4.3mm

€2.00

Greenhouses with lamp cables and chandelier pavilions

Cable clamp, cable fastener, screws, interlock button

M6 zinc-plated steel screws without hollow hexagonal head - sold in packs of 10 -...

vis-acier-m6-HC

€0.69

M6 galvanised steel screws for luminaire assembly

M5 zinc-plated steel screw without hollow hexagonal head - thread length according to variation

Cable clamp, cable fastener, screws, interlock button

M5 zinc-plated steel screws without hollow hexagonal head - sold in packs of 10 -...

vis-acier-m5-HC

€0.66

M5 galvanised steel screws for luminaire assembly

Cable clamp, cable fastener, screws, interlock button

Nylon cable clamp - black - pack of 10

Collier-ST-C

€1.32

Nylon clamp for passing electrical cables

Cable clamp, cable fastener, screws, interlock button

Nylon cable clamp - white - pack of 10

Collier-ST-C

€1.32

Nylon clamp for passing electrical cables

Lighting and lighting design

Dummy candle D27 for chandelier black colour length 100mm

bougie-noire-100-D27

€1.30

Natural black faux candle sleeve with imitation candle wax drippings.

M4 zinc-plated steel screw without hollow hexagonal head - thread length according to variation

Cable clamp, cable fastener, screws, interlock button

M4 zinc-plated steel screws without hollow hexagonal head - sold in packs of 10 -...

vis-acier-m4-HC

€0.60

M4 galvanised steel screws for luminaire assembly

Ring, hook, ball joint and spring

Fixing bracket for luminaire mounted on M10 or M12 threaded rod - Length 110mm

Pont-diamètre-10/12-110mm

€3.70

Luminaire fixing bracket for M10 or M12 threaded tube

Fixing bracket for luminaire mounted on M10 threaded rod - Length 70mm

Ring, hook, ball joint and spring

Fixing bracket for luminaire mounted on M10 threaded rod - Length 68mm

Pont-m10-68mm

€2.95

Luminaire fixing bracket with M10 thread

Fixing bracket for luminaire mounted on M10 threaded rod - Length 120mm

Ring, hook, ball joint and spring

Fixing bracket for luminaire mounted on M12 threaded rod - Length 120mm

Pont-m12-120mm

€3.90

Luminaire fixing bracket with M12 thread

Ring, hook, ball joint and spring

Three-arm spring clamp on M10 rod size according to declination

Ressort-3-bras

€1.32

Spring diameter 100mm to 210mm for all recessed luminaires.

Ring, hook, ball joint and spring

U-profile mounting rail for M10 threaded tube - any length, depending on version

Profil-rail

€0.53

Mounting rail for luminaire and M10 threaded tube

Ring, hook, ball joint and spring

Fixing bracket for luminaire with lashing hook - diameter of bracket 90mm

Bride-an-op-90

€5.60

Luminaire mounting bracket with 90mm diameter hook

Fixing flange for luminaire with open ring - flange diameter 73mm

Ring, hook, ball joint and spring

Fixing bracket for luminaire with lashing hook - diameter of bracket 73mm

Bride-an-op-73

€4.30

Luminaire mounting bracket with 73mm diameter hook

Mounting flange for luminaire mounted on threaded rod - flange diameter 135mm

Ring, hook, ball joint and spring

Mounting flange for luminaire mounted on threaded rod - flange diameter 125mm

Bride-fix-125

€12.50

125mm diameter luminaire mounting bracket

Fixing flange for luminaire mounted on threaded rod - diameter 90mm to 135mm depending on declination

Ring, hook, ball joint and spring

Mounting flange for luminaire mounted on threaded rod - flange diameter 90mm

Bride-fix-90

€8.90

90mm diameter luminaire mounting bracket

Ring, hook, ball joint and spring

Mounting flange for luminaire mounted on threaded rod - flange diameter 135mm

Bride-fix-135

€13.50

Luminaire mounting bracket diameter 135mm

Ring, hook, ball joint and spring

Mounting flange for luminaire mounted on threaded rod - flange diameter 110mm

Bride-fix-110

€10.50

Luminaire mounting flange diameter 110mm

On / Of / On dual-circuit toggle switch with three screw terminals

Electrical socket and switch

On / Off / On dual-circuit toggle switch with three screw terminals

inter-on-off-on-3-broches-13L

€7.80

Lamp power switch with lever knob

Rosette, bell, claw and socket cover

Baselitz brass bell - diameter 180mm M10 tube passage

pavillon-laiton-baselitz

€43.90

Brass horn with oak leaf for antique luminaire

Rosette, bell, claw and socket cover

Canova brass bell - diameter 180mm M10 tube passage

pavillon-laiton-canova

€32.92

Brass horn with oak leaf for antique luminaire

Electrical socket and switch

On / On dual-circuit toggle or rocker switch with six screw terminals

inter-on-on-6-broches-22L

€9.00

Lamp power switch with lever knob

Lever or rocker switch On / Off / On dual circuits

Out-of-Stock

Electrical socket and switch

On / Off / On dual-circuit toggle switch with six screw terminals

inter-on-off-on-6-broches-23L

€9.50

Lamp power switch with lever knob

View

Double-circuit toggle or rocker switch with screw terminal block

Electrical socket and switch

On / On toggle or rocker switch for in-and-out circuits screw terminal - chrome Gold

inter à levier-va-vient-12L-or

€6.60

Lamp power switch with lever knob

Tube and threaded accessory

1/8 inch zinc-plated nut, 3mm thick DN6

écrou-zinc-1/8

€0.18

Low zinc-plated steel nuts are perfect for assembling light fittings and chandeliers mounted on 1/8" hollow rods.

Electrical cable on transparent sheath

Flat electrical cable on transparent PVC sheath with two 0.5mm² gold-plated copper...

cable-plat-0.5mm²-or

€2.75

Flat electrical cable with two gold-plated copper conductors, with 0.5mm² wires - length in one-metre increments

Electrical cable on transparent sheath

Flat electrical cable on transparent PVC sheath with two 0.5 mm² silver-plated copper...

cable-plat-0.5mm²-silver

€2.75

Flat electrical cable with two silver-plated copper conductors, with 0.5mm² wires - length in one-metre variations

Flat electrical cable with transparent Teflon sheath and two 0.7 mm² conductors

Electrical cable on transparent sheath

Flat electrical cable on transparent PVC sheath with two silver-plated 0.75 mm² copper...

cable-plat-0.75mm²

€3.30

Two-wire flat electric cable with 0.75mm² wires - length in one-metre variations

Brass pavilion, lamp base, collar, rosette

Lagasse brass bell - diameter 107mm M10 tube passage

pavillon-Lagasse-107

€9.50

Brass bell for antique luminaire

Brass pavilion, lamp base, collar, rosette

Klimt brass horn - diameter 60mm M10 tube passage

pavillon-Klimt-60

€5.90

Brass bell for antique luminaire

Brass pavilion, lamp base, collar, rosette

Kahlo brass bell - diameter 70mm M10 tube passage

pavillon-Kahlo-70

€7.50

Brass bell for antique luminaire

Brass pavilion, lamp base, collar, rosette

Eyck brass bell - diameter 102mm M10 tube passage

pavillon-Eyck-102

€9.50

Brass bell for antique luminaire

Brass pavilion, lamp base, collar, rosette

Derain brass bell - diameter 62mm M10 tube passage

pavillon-Derain-62

€6.90

Brass bell for antique luminaire

Brass pavilion, lamp base, collar, rosette

Dassini brass bell - diameter 132mm M10 tube passage

pavillon-Dassini-132

€14.50

Brass bell for antique luminaire

Brass pavilion, lamp base, collar, rosette

Courbet brass bell - diameter 123mm M10 tube passage

pavillon-Courbet-123

€12.50

Brass bell for antique luminaire

Brass pavilion, lamp base, collar, rosette

Cordy brass bell - diameter 104mm M10 tube passage

pavillon-Cordy-104

€11.50

Brass bell for antique luminaire

Brass pavilion, lamp base, collar, rosette

Breton brass bell - diameter 81mm M10 tube passage

pavillon-Breton-81

€8.50

Brass bell for antique luminaire

Brass pavilion, lamp base, collar, rosette

Basquiat brass bell - diameter 72mm M10 tube passage

pavillon-Basquiat-72

€7.50

Brass bell for antique luminaire

Brass pavilion, lamp base, collar, rosette

Arsham brass bell - diameter 125mm M10 tube passage

pavillon-Arsham-125

€14.50

Brass bell for antique luminaire

Tube and threaded accessory

Solid brass tubular body for chandelier, suspension - height 149mm Ø 37mm

Clarinette-149*37

€22.10

A decorative brass element for assembling luminaires, it allows the construction of a hollow luminaire body.

Tube and threaded accessory

Solid brass tubular body for chandelier, suspension - height 200mm Ø 42mm

Clarinette-200*42

€24.80

A decorative brass element for assembling luminaires, it allows the construction of a hollow luminaire body.

Tube and threaded accessory

Solid brass tubular body for chandeliers, suspension - height 150mm Ø 27mm

Clarinette-150*27

€20.20

A decorative brass element for assembling luminaires, it allows the construction of a hollow luminaire body.

Tube and threaded accessory

Solid brass tubular body, clarinet type, for chandeliers, suspension - height 97mm Ø 46mm

Clarinette-97*46

€18.60

A decorative brass element for assembling luminaires, it allows the construction of a hollow luminaire body.

Tube and threaded accessory

Solid brass tubular body for chandeliers, suspension - height 89mm Ø 26mm

Clarinette-89*26

€16.10

A decorative brass element for assembling luminaires, it allows the construction of a hollow luminaire body.

Solid brass tubular body, clarinet type for chandeliers, suspension 81 * 33

Tube and threaded accessory

Solid brass tubular body, clarinet type, for chandeliers, suspension - height 81mm Ø 33mm

Clarinette-81*33

€12.90

A decorative brass element for assembling luminaires, it allows the construction of a hollow luminaire body.

Solid brass tubular body, clarinet type, for chandeliers, suspension 69 * 30

Tube and threaded accessory

Solid brass tubular body for chandeliers, suspension - height 69mm Ø 30mm

Clarinette-69*30

€11.20

A decorative brass element for assembling luminaires, it allows the construction of a hollow luminaire body.

Solid brass tubular body, clarinet type for chandeliers, suspension 55 * 42

Tube and threaded accessory

Solid brass tubular body for chandeliers, suspension - height 55mm Ø 42mm

Clarinette-55*42

€10.40

A decorative brass element for assembling luminaires, it allows the construction of a hollow luminaire body.

Rosette, bell, claw and socket cover

Brass lampholder cover with rolled edge for E27 lamp

Cache-douille-laiton-bordure rou

€9.60

Brass lampholder cover for E27 base luminaire

Rosette, bell, claw and socket cover

Brass lampholder cover with curved base for E27 lamp

Cache-douille-laiton-E27

€6.40

Brass lampholder cover for E27 base luminaire

Tube and threaded accessory

Black painted steel ball 50mm diameter with quadruple outlet M10 tapping

Boule-quatre-diam-50mm

€7.30

Hollow distribution ball with four M10 threads for cable routing, perfect for assembling M10 hollow rods.

M16 coloured threaded tube, 10 cm long an accessory for bulb sockets

Tube and threaded accessory

M16 coloured threaded tube, 10 cm long, 1.5 mm thread for luminaire

TC-M16X1.5-10cm

€8.90

Coloured threaded rod for fixing bulb sockets, tube length 10 centimetres. Choose the colour you need from the range.

M12 coloured threaded tube, 15 cm long, a chandelier accessory

Tube and threaded accessory

M12 coloured threaded tube, 15 cm long, 1 mm thread for chandeliers

TC-M12-15cm

€7.95

Coloured threaded rod for fixing bulb sockets, tube length 15 centimetres.Choose the colour you need from the range.

M12 coloured threaded tube, 10 cm long an accessory for bulb sockets

Tube and threaded accessory

M12 coloured threaded tube, 10 cm long, 1 mm thread for chandeliers

TC-M12-10cm

€5.50

Coloured threaded rod for fixing bulb sockets, tube length 10 centimetres. Choose the colour you need from the range.

LED filament bulb

T26 LED filament bulb with E14 base - 230 volts for 3-watt emergency power unit

T26-3W-E14

€5.90

The E14 lamp format means this bulb can be easily integrated into any luminaire.

MR16 porcelain lampholder with autogrip connection to bare wire

Sockets, multipliers, risers, adapter sockets

Porcelain lampholder for MR16 or G4 lamps with autogrip connection on bare wire

culot-MR16-autogrip

€0.85

MR16 base on bare wire in G4 or GU5.3 format for halogen or LED lamps.

Lampholder and base

E14 porcelain mini socket on M10 hollow threaded rods

mini-Douille-E14-M10

€3.90

E14 porcelain socket with support for M10 hollow threaded rods

Threaded tube M12 length 3 to 10 cm an accessory for luminaire

Tube and threaded accessory

Threaded tube M12 1mm pitch length 3 to 10 cm an accessory for luminaire

DIY-058-M12

€0.30

Hollow threaded rod sold individually in M12 standard with 1mm fine pitch for fixing bulb sockets. Choose the length you need from the range available in this advert in lengths from 3cm to 10cm.

Threaded tube M12 length from 15 to 50 cm an accessory for luminaire

Tube and threaded accessory

Threaded tube M12 1mm pitch length from 15 to 50 cm an accessory for luminaire

DIY-058-M12

€2.16

Hollow threaded rod sold individually in M12 standard with 1mm fine pitch for fixing bulb sockets. Choose the length you need from the range available in this advert in lengths from 15cm to 50cm.

Tube and threaded accessory

Threaded tube M8 1mm pitch length from 1 to 10 cm an accessory for luminaire

DIY-058-M8

€0.10

Hollow threaded rod sold individually in M8 standard with 1mm fine pitch for fixing bulb sockets. Choose the length you need from the variations available in this advert in lengths from 1cm to 10cm.

Single-pole ON/OFF toggle or rocker switch with screw terminal block

Electrical socket and switch

On / Off single-pole toggle or rocker switch with screw terminal - chrome Gold

inter à levier-cap-11L-OR

€6.20

Lamp power switch with lever knob

Single-pole ON/OFF mini toggle or rocker switch with trim cap

Electrical socket and switch

Mini single-pole toggle or rocker switch On / Off with trim cap

mini-inter à levier-cap

€5.95

Lamp power switch with lever knob

Brass and bronze creation for luminaire

Brass washer for M14 screw external diameter 28mm thickness 1.5mm

Rondelle-laiton-M14x28

€2.00

Brass washer for M14 screw, 1.5mm thick, used in the construction of chandeliers and luminaires

Brass and bronze creation for luminaire

Brass washer for M12 screw external diameter 24mm thickness 1.5mm

Rondelle-laiton-M12x24

€1.80

Brass washer for M12 screw, 1.5mm thick, used in the construction of chandeliers and lighting fixtures

Brass and bronze creation for luminaire

Brass washer for M8 screw external diameter 24mm thickness 1.5mm

Rondelle-laiton-M8x24

€1.60

Brass washer for M8 screw, thickness 1.5mm, used in the construction of chandeliers or luminaires

Sockets, multipliers, risers, adapter sockets

G9 porcelain lamp base for free-standing or bridge mounting

Culot-G9-P

€0.90

G9 porcelain lamp base for free or bridge mounting

M10 M8 brass reducer for electric threaded tube

Out-of-Stock

Tube and threaded accessory

Brass reduction M10 pitch 1mm to M8 pitch 1mm 15mm high

DIY206031-m10-m8-15

€1.80

Reducer for electrical brass tube, internal/external thread - choice of dimensions

View

Ring, hook, ball joint and spring

22 mm diameter brass suspension ring machined from solid with M12 threading

DIY089-204038

€4.40

M12 brass threaded ring with 1mm pitch for fixing luminaires

Ring, hook, ball joint and spring

Brass suspension ring, diameter 24 mm, machined from solid, M12 thread

DIY089-204026

€5.40

M12 brass threaded ring with 1mm pitch for fixing luminaires

Ring, hook, ball joint and spring

30 mm diameter brass suspension ring machined from solid with M16 threads

DIY089-204084

€12.60

M16 brass threaded ring with 1.5mm pitch for fixing luminaires

Ring, hook, ball joint and spring

Peebles brass ball joint, 50° articulation for M10 threaded tube with 1mm pitch

DIY155-231129-Peebles

€7.60

M10 threaded solid brass ball joint for assembling hollow polishing rods

Tube and threaded accessory

Brass articulated arm with M10 thread for luminaire on M10 threaded tube with 1mm pitch

DIY155-231110

€3.70

M10 threaded flexible brass sleeve for M10 threaded luminaire on gloss hollow rods

350° male rotating brass sleeve for lamp bases on M10 threaded tube

Tube and threaded accessory

350° rotating brass sleeve M-M for lamp bases on M10 threaded tube with 1mm pitch

DIY155-231117

€5.00

350° rotatable brass sleeve for M10 threaded lamp bases for assembling hollow rods for chandeliers

Ball-shaped brass sleeve with double M10 threaded outlets

Tube and threaded accessory

Ball-shaped brass sleeve with double 90° outlets M10 tapping

DIY093-221041C

€4.60

Ball-shaped brass sleeve with M10 thread for passing electrical cables.

Rounded brass washer, diameter 30mm, thickness 5mm

Brass and bronze creation for luminaire

Rounded brass washer with M10 thread for 30mm diameter lighting fittings

DIY101-207101

€3.99

Rounded brass washer, diameter 30mm, thickness 5mm, used for the construction of brass chandeliers or light fittings.

Zinc-plated serrated washer for M4 threaded tube

Nut and washer

M4 fan washer with internal teeth type JZ in galvanised steel

Rondelle dentelée M4

€0.06

This fan lock washer is particularly suitable for assembling luminaires fitted with a socket on a hollow stem.

Ring, hook, ball joint and spring

Orella brass ball joint, a joint for M10 threaded tube with 1mm pitch

DIY155-Orella-231021

€9.60

M10 threaded solid brass ball joint for assembling hollow polishing rods

Ring, hook, ball joint and spring

Solis brass ball joint, a joint for M10 threaded tube with 1mm pitch

DIY155-Solis-231055

€6.95

M10 threaded solid brass ball joint for assembling hollow polishing rods

Tube and threaded accessory

350° rotating brass sleeve for lamp bases on M10 threaded tube with 1mm pitch

DIY155-231085

€5.60

350° rotatable brass sleeve for M10 threaded lamp bases for assembling hollow rods for chandeliers

Brass sleeve Rosalind brass ball joint, one joint for M10 threaded tube with 1mm pitch

Ring, hook, ball joint and spring

Rosalind brass ball joint for M10 threaded tubes with 1mm pitch

DIY155-231182

€8.80

Rosalind M10 threaded solid brass ball joint for assembling hollow polishing rods

Out-of-Stock

Rosette, bell, claw and socket cover

Tenuous brass bell - diameter 118mm pre-drilled diameter 5mm

DIY086-209170

€34.60

Tenuous brass horn for antique luminaire

View

Electrical cable on transparent sheath

Round electrical cable 2x0.3mm² on transparent Teflon with stainless steel support cable

cable-porteur-2x-0.3mm+1-TP

€2.95

Two-wire electrical cable, with 0.3mm² wires plus suspension cable - length in one-metre variations

Out-of-Stock

Tube and threaded accessory

Brass hexagon nut for M8 threaded tube, 1.25 mm pitch

Ecrou-laiton-M8-1.25

€0.40

The low brass nuts are perfect for assembling light fittings and chandeliers mounted on M8x1.25 hollow rods.

View

Tools and assembly accessories

M10 brass threaded tube, 1mm pitch - 35mm long

DIY-146-35mm

€2.24

Hollow solid brass threaded rod sold individually in M10 standard with 1mm fine pitch for fixing bulb sockets.

Tools and assembly accessories

M10 brass threaded tube, 1mm pitch - 30mm long

DIY-146-30mm

€1.65

Hollow solid brass threaded rod sold individually in M10 standard with 1mm fine pitch for fixing bulb sockets.

Tools and assembly accessories

M10 brass threaded tube, 1mm pitch - 25mm long

DIY-146-25mm

€1.38

Hollow solid brass threaded rod sold individually in M10 standard with 1mm fine pitch for fixing bulb sockets.

Tools and assembly accessories

M10 brass threaded tube, 1mm pitch - 20mm long

DIY-146-20mm

€1.15

Hollow solid brass threaded rod sold individually in M10 standard with 1mm fine pitch for fixing bulb sockets.

M12 brass threaded tube, 1mm pitch, 15mm long

Tools and assembly accessories

M10 brass threaded tube, 1mm pitch - 15mm long

DIY-146-15mm

€0.62

Hollow solid brass threaded rod sold individually in M10 standard with 1mm fine pitch for fixing bulb sockets.

Tools and assembly accessories

M12 brass threaded tube, 1mm pitch - 15mm long

DIY-146-206017

€0.80

Hollow solid brass threaded rod sold individually in M12 standard with 1mm fine pitch for fixing bulb sockets.

Tools and assembly accessories

M8 brass threaded tube, 1mm pitch - 18mm long

DIY-146-206069

€0.95

Hollow solid brass threaded rod sold individually in M8 standard with 1mm fine pitch for fixing bulb sockets.

Brass luminaire tip diameter 16mm M10 threaded cone shape

Tube and threaded accessory

Brass cone-shaped luminaire tip, diameter 16mm, M10 threaded

DIY094-203074

€1.60

A decorative element for assembling M10 brass luminaires and chandeliers.

E27 elegant vintage bronze lampholder for Edison style lamp

Lampholder and base

Thylacine lampholder in machined solid brass for Edison-style lamp with long thread

DIY154-23325

€8.45

Thylacine lampholder in vintage brass, for a resolutely neo-retro style, ideal for Edison-style incandescent or LED filament lamps,

M4 brass threaded rod, 0.8mm standard pitch, headless, 15mm long

Cable clamp, cable fastener, screws, interlock button

M4 brass threaded rod, 0.7mm standard pitch, headless, 15mm long

DIY146-206013

€0.36

M4 brass screws for luminaire assembly

M4 brass threaded rod, 0.8mm standard pitch, headless, 25mm long

Cable clamp, cable fastener, screws, interlock button

M4 brass threaded rod, 0.7mm standard pitch, headless, 25mm long

DIY146-206002

€0.46

M4 brass screws for luminaire assembly

Straight bridge in galvanised steel with M10 thread, 20 mm high

Tube and threaded accessory

Straight M10 threaded zinc-plated steel trigger guard with 1mm pitch - trigger guard...

pontet-1-droit-M10-h20

€0.60

M10 threaded bridge in galvanised steel for porcelain lamp bases

Straight bridge in galvanised steel with M10 thread, height 13mm

Tube and threaded accessory

Straight galvanised steel trigger guard M10 threaded at 1mm pitch - trigger guard...

pontet-1-droit-M10-h13

€0.60

M10 threaded bridge in galvanised steel for porcelain lamp bases

Straight bridge in galvanised steel with M12 thread, height 12mm

Tube and threaded accessory

Straight galvanised steel trigger guard M12 threaded at 1mm pitch - trigger guard...

pontet-droit-M12-h12

€0.60

M12 threaded bridge in galvanised steel for porcelain lamp bases

Tube and threaded accessory

Straight galvanised steel trigger guard M10 threaded at 1mm pitch - trigger guard...

pontet-droit-M10-h20

€0.60

M10 threaded bridge in galvanised steel for porcelain lamp bases

Tube and threaded accessory

Straight galvanised steel trigger guard M10 threaded at 1mm pitch - trigger guard...

pontet-droit-M10-h13

€0.40

M10 threaded bridge in galvanised steel for porcelain lamp bases

brass threaded ring for M12 tube 15mm diameter

Nut and washer

M12 brass threaded ring, diameter 15mm, height 20mm

DIY092-205022-M12

€2.20

Brass bushes are perfect for assembling light fittings and chandeliers mounted on M12 hollow rods.

Straight bridge in galvanised steel with M10 thread, height 12mm

Out-of-Stock

Tube and threaded accessory

Straight galvanised steel trigger guard M10 threaded at 1mm pitch - trigger guard...

pontet-droit-M10-h12

€0.60

M10 threaded bridge in galvanised steel for porcelain lamp bases

View

Straight bridge in galvanised steel with M10 thread, height 9mm

Tube and threaded accessory

Straight galvanised steel trigger guard M10 threaded at 1mm pitch - height of trigger...

pontet-droit-M10-h9

€0.60

M10 threaded bridge in galvanised steel for porcelain lamp bases

Curved bridge in galvanised steel with M10 thread, height 10mm

Tube and threaded accessory

M10 threaded bridge with 1mm pitch - bridge height 10mm - internal feet

pontet-courbe-M10-h10

€0.60

M10 threaded bridge in galvanised steel for porcelain lamp bases

M12 threaded curved bridge in galvanised steel for porcelain lamp bases

Out-of-Stock

Tube and threaded accessory

M12 threaded trigger guard in curved galvanised steel with 1mm pitch - height of...

pontet-courbe-M12-h13

€0.60

M12 threaded bridge in galvanised steel for porcelain lamp bases

View

Twisted electrical cable

Transparent twisted electrical cable with two 2 x 0.75mm² conductors on a transparent...

cable-2x-0.75mm

€4.25

Transparent twisted electric cable with two conductors and 0.75 mm² wires - length in one metre increments

Brass-coloured plastic E27 socket for light bulb

Out-of-Stock

Lampholder and base

Smooth brass-coloured plastic E27 base lampholder for lamps fitted with a lampholder cap

Douille-lisse-E27-laiton

€2.45

E27 lampholder in smooth brass-coloured plastic, self-extinguishing, for incandescent, halogen or low-energy lamps,

View

Sockets, multipliers, risers, adapter sockets

Adaptor sleeve - E12 to MR16

EF-E12-MR16TC

€1.90

Easily convert your E12 socket into an MR16 base in an instant with this adapter socket

0.5mm² coaxial electric cable on transparent Teflon, 1m long

Round electric cable

Coaxial electrical cable on transparent Teflon with two 0.75mm² conductors

cable-coax-0.75mm²

€3.60

Two-core coaxial electrical cable with 0.75 mm² wires - length in 1 metre increments

2x0.5mm electrical cable on transparent Teflon with stainless steel support cable

Round electric cable

Round electrical cable 2x0.75mm² on transparent Teflon with stainless steel support cable

cable-porteur-2x0.75+1-TP

€3.95

Two-wire electrical cable, with 0.75mm² wires plus suspension cable - length in one-metre variations

Round electric cable

Round electrical cable with two 2x0.3mm² conductors on transparent PVC sheath and...

cable-2x-0.3mm

€2.40

Transparent two-core electric cable with 0.3mm² wires - length in one-metre variations

Machined solid brass D11 socket for G4 lamp - M6 threaded

Lampholder and base

D11 brass socket with M6 thread for G4 lamp with spring retainer for luminaire

D11-G4-laiton-m6

€4.38

D11 socket in vintage brass, for a resolutely neo-retro style, ideal for Edison-style incandescent or LED filament lamps,

Out-of-Stock

Sockets, multipliers, risers, adapter sockets

M10 threaded D11 socket for G4 lamp with spring retainer for luminaire

D11-G4-chrome-filete-m10

€2.90

This G4 lamp holder makes it easy to install small G4 light sources in luminaires.

View

Sockets, multipliers, risers, adapter sockets

D11 socket for G4 lamp with one-metre coaxial supply cable with spring for luminaire...

manchon-D11-cable-coax

€6.90

D11 socket for G4 lamps, for easy installation of small G4 light sources in luminaires.

Glassware, stoneware, designer lighting

60mm diameter pearl drop glassware for D11 base and G4 lamp

verrerie-goutte-D11

€9.90

60mm diameter pearl drop glassware for D11 base and G4 lamp

Zinc-plated steel ring nut diameter M28mm

Tube and threaded accessory

Threaded zinc-plated steel ring nut M28mm with 2mm pitch for GU10 base

écrou-acier-M28

€1.20

Zinc-plated steel ring nut diameter M28 2mm pitch

M10 threaded bridge in galvanised steel for G9 porcelain lamp bases

Tube and threaded accessory

M10 threaded trigger guard in curved galvanised steel with 1mm pitch - height of...

pontet-courbe-M10-h13

€0.62

M10 threaded bridge in galvanised steel for porcelain lamp bases

Porcelain base for G9 lamp without ring-threaded cables

Sockets, multipliers, risers, adapter sockets

Porcelain base for G9 lamp without Grip-connect cables and thread-ring

culot-G9-filtage

€3.50

Standard G9 porcelain socket for halogen or LED bulbs

Brass and bronze creation for luminaire

Chrome-plated brass electrical cable clamp with cable gland - M10 thread

serre-cable-chrome-presse-M10

€2.95

Chrome-plated brass electrical cable clamp for light bulb socket or ceiling rose with M10 thread, 1 mm pitch.

Brass and bronze creation for luminaire

Chrome-plated brass electrical cable clamp with cable gland - M8 thread

serre-cable-chrome-presse-M8

€2.80

Chrome-plated brass electrical cable clamp for light bulb socket or ceiling rose with 1 mm M8 thread.

M14 threaded tube with 1.5mm pitch - 100cm long

Tools and assembly accessories

Threaded tube in galvanised steel, diameter 1/8 inch - length 1 metre

Tube-acier-1/8"-1m

€12.95

Hollow galvanised steel threaded rod sold individually in 1/8" standard for fixing bulb sockets.

Tools and assembly accessories

1/8 inch diameter threaded brass tube - 1 metre long

Tube-laiton-1/8"-1m

€30.50

Hollow solid brass threaded rod sold individually in 1/8" standard for fixing bulb sockets.

E12 porcelain socket on M10 hollow threaded rods with cables

Lampholder and base

E12 porcelain socket on M10 hollow threaded rods with terminal block

Douille-E12-M10

€3.50

E12 porcelain socket with socket cover and support for M10 hollow threaded rods

Lampholder and base

E12 porcelain socket on M10 hollow threaded rods with cables

Douille-E12-M10

€3.10

E12 porcelain socket with support for M10 hollow threaded rods

Sockets, multipliers, risers, adapter sockets

Spring for D11 sleeve for G4 lamp holder - to hold glassware, lampshade, luminaire

Ressort-D11

€0.25

Spring for G4 lamp holder to hold glassware, lampshade, luminaire

Sockets, multipliers, risers, adapter sockets

M6 threaded D11 socket for G4 lamp with spring retainer for luminaire

D11-G4-chrome-m6

€2.90

This G4 lamp holder makes it easy to install small G4 light sources in luminaires.

Sockets, multipliers, risers, adapter sockets

M10 threaded D11 socket for G4 lamp with spring retainer for luminaire, glassware

manchon-D11-G4-Male-M10

€3.20

D11 socket for G4 lamps, for easy installation of small G4 light sources in luminaires.

M6 threaded brass column for luminaire assembly - diameter 15mm length 90mm

Out-of-Stock

Tube and threaded accessory

M5 threaded brass column for luminaire assembly - diameter 15mm length 90mm

DIY094-236001-15

€12.90

A decorative brass element for assembling the luminaires.

View

Tube and threaded accessory

M5 threaded brass column for luminaire assembly - diameter 20mm length 90mm

DIY094-236002-20

€19.92

A decorative brass element for assembling the luminaires.

Half-moon brass wall light / M10 tapped base plate

Rosette, bell, claw and socket cover

Brass half-moon wall bracket / M10 threaded base plate

DIY153-222037-demie-lune

€14.90

M10 threaded half-moon brass wall bracket for antique luminaire

Out-of-Stock

Tools and assembly accessories

Threaded brass tube M10 1mm pitch - length 12 cm

DIY120-12cm

€6.00

Brass threaded tube for fixing bulb sockets, tube length 12 centimetres.

View

Tube and threaded accessory

Brass luminaire point diameter 22mm length 60mm - tapped M10

DIY094-226001Y

€13.50

A decorative element for assembling M10 brass luminaires and chandeliers.

Brass luminaire tip, diameter 25mm, double tapped M10

Tube and threaded accessory

Brass luminaire tip, diameter 25mm, length 81mm - double tapped M10 at 90°.

DIY094-225812Y

€22.50

A decorative element for assembling M10 brass luminaires and chandeliers.

Tube and threaded accessory

Square Brass Dogwood Flower Luminaire Point with M10 Thread

DIY094-242450Y-Cornouiller

€23.75

A decorative element for assembling M10 brass luminaires and chandeliers.

Rosette, bell, claw and socket cover

Nancy brass bell - diameter 125mm M10 tube passage

pavillon-laiton-Nancy

€34.60

Large horn in Nancy brass for antique luminaire

Daum E27 socket with chain on/off switch in brass

Lampholder and base

Daum brass E27 socket with chain on/off switch, smooth Edison style

Daum-233003

€19.80

Daum E27 lampholder in vintage brass, for a resolutely neo-retro style, ideal for Edison-style incandescent or LED filament lamps,

Bailly E27 socket with chain on/off switch in brass

Lampholder and base

Bailly brass E27 socket with chain Edison-style on/off switch, threaded

Bailly-233092

€19.80

Bailly E27 lampholder in vintage brass, for a resolutely neo-retro style, ideal for Edison-style incandescent or LED filament lamps,

brass ring for threaded tube M10 diameter 14mm

Nut and washer

Ring - brass ring 10.5mm internal diameter - M3 locking screw

DIY151-215044-10

€1.30

Brass bushes are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

brass ring for threaded tube M14 diameter 18mm

Nut and washer

Ring - brass ring 14.3mm internal diameter - M3 locking screw

DIY151-205100-14

€1.50

Brass bushes are perfect for assembling light fittings and chandeliers mounted on M14 hollow rods.

Tools and assembly accessories

Threaded brass tube M12 1mm pitch - 92mm long

DIY120-92mm

€6.80

Brass threaded tube for fixing bulb sockets, tube length 92 mm

Tools and assembly accessories

Threaded brass tube M10 1mm pitch - 30 cm long

DIY120-30cm

€16.90

Brass threaded tube for fixing bulb sockets, tube length 30 cm.

Tools and assembly accessories

Threaded brass tube M10 1mm pitch - length 20 cm

DIY120-20cm

€12.00

Brass threaded tube for fixing bulb sockets, tube length 20 cm.

M10 electric cable clamp in transparent plastic

Cable clamp, cable fastener, screws, interlock button

M10 electrical cable clamp in transparent plastic for lamp socket or ceiling rose with...

Serre-M10-transparent

€0.96

Transparent plastic electrical cable clamp for light bulb socket or ceiling rose with M10 thread.

M10 black plastic electrical cable clamp

Cable clamp, cable fastener, screws, interlock button

Black plastic M10 electrical cable clamp for lamp socket or ceiling rose with M6...

Serre-M10-noir

€0.96

Black plastic electrical cable clamp for light bulb socket or ceiling rose with M10 thread.

Cable clamp, cable fastener, screws, interlock button

White plastic M10 electrical cable clamp for lamp socket or ceiling rose with M6...

Serre-M10-blanc

€0.96

White plastic electrical cable clamp for light bulb socket or ceiling rose with M10 thread.

Electrical cable 2x0.75mm on transparent Teflon

Round electric cable

Round electrical cable with two 2x0.75mm² conductors on transparent PVC sheath and...

cable-R-2x-0.75mm

€3.50

Transparent two-core electrical cable with 0.75mm² wires - length in one-metre variations

2x0.5mm electrical cable on transparent Teflon

Round electric cable

Round electrical cable with two 2x0.5mm² conductors on transparent PVC sheath and...

cable-2x-0.5mm

€2.90

Transparent two-core electrical cable with 0.5 mm² wires - length in one-metre variations

Round electric cable

Round electrical cable 2x0.5mm² on transparent Teflon with stainless steel support cable

cable-porteur-2x-0.5mm+1-TP

€3.60

Two-wire electrical cable, with 0.5mm² wires plus suspension cable - length in one-metre variations

0.3mm² transparent Teflon gold-coloured coaxial electric cable, 1m long

Round electric cable

Gold-coloured coaxial electric cable on transparent Teflon with two 0.3 mm² conductors

cable-coax-or-0.3mm²

€2.59

Two-core coaxial electrical cable with 0.3 mm² wires - length in 1 metre increments

Threaded insert for M4 tube, 0.7 mm pitch

Tube and threaded accessory

Threaded insert in dichromated steel for M4 tube with 0.7 mm pitch

Insert fileté-M4-0.7

€0.35

Self-tapping sockets ideal for assembling light fittings and chandeliers mounted on M4 hollow rods.

Threaded insert for M5 tube, 0.8 mm pitch

Tube and threaded accessory

Threaded insert in dichromated steel for M5 tube with 0.8 mm pitch

Insert fileté-M5-0.8

€0.36

Self-tapping sockets ideal for assembling luminaires and lighting fixtures mounted on M5 hollow rods.

Tube and threaded accessory

Threaded insert in dichromated steel for M6 tube with 1 mm pitch

Insert fileté-M6-1

€0.38

Self-tapping sockets ideal for assembling light fittings and chandeliers mounted on M6 hollow rods.

Threaded insert for M8 tube, 1.25 mm pitch

Tube and threaded accessory

Threaded insert in dichromated steel for M8 tube with 1.25 mm pitch

Insert fileté-M8-1.25

€0.40

Self-tapping sockets ideal for assembling light fittings and chandeliers mounted on M8 hollow rods.

Ring, hook, ball joint and spring

Retaining spring on threaded socket for GU10 base, E12 and E14 sockets or luminaire...

ressort-douille

€2.10

Retaining spring on threaded bushing

16mm diameter M10 threaded teardrop-shaped brass light fitting tip

Tube and threaded accessory

Brass luminaire point diameter 16mm length 85mm M10 threaded - water drop

DIY094-160853Y

€9.96

A decorative element for assembling M10 brass luminaires and chandeliers.

Straight-edged brass ring kit - fixing for luminaire glassware

Rosette, bell, claw and socket cover

Brass rose Ø 33 to 46mm - mounting kit for glass luminaire or other suspended...

DIY150228206-3346

€9.60

The perfect fixing kit for creators of luminaires on glass or any other self-made suspended structure.

Brass ring fixing kit for luminaire glassware

Rosette, bell, claw and socket cover

Brass rose Ø 35 to 48mm - mounting kit for glass luminaire or other suspended...

DIY150228157-3548

€8.70

The perfect fixing kit for creators of luminaires on glass or any other self-made suspended structure.

Rosette, bell, claw and socket cover

Brass rose Ø 50 to 61mm - mounting kit for glass luminaire or other suspended...

DIY150228077-5061

€11.50

The perfect fixing kit for creators of luminaires on glass or any other self-made suspended structure.

Rosette, bell, claw and socket cover

Brass rose Ø 53 to 70mm - mounting kit for glass luminaire or other suspended...

DIY150228156-5370

€13.50

The perfect fixing kit for creators of light fittings on glass or any other self-made suspended structure.

Product available with different options

Cable clamp, cable fastener, screws, interlock button

M3 dichromate-plated steel screw, oval-head, cross-head, any length, depending on version

vis-acier-m3-cruci

€0.28

M3 dichromate-coated steel screws for luminaire assembly

View

Rosette, bell, claw and socket cover

Brass rose Ø 65 to 85mm - mounting kit for glass luminaire or other suspended...

DIY150228026-6585

€24.50

The perfect fixing kit for creators of light fittings on glass or any other self-made suspended structure.

Brass collar for luminaire or lampshade diametre 33 mm

Rosette, bell, claw and socket cover

Brass suspension claw for luminaire support or lampshade - diameter 33 mm for E27...

DIY149228079-33

€4.90

Brass suspension claw, for holding a lampshade or glass luminaire with an integrated lampholder.

Brass collar to support light fitting or 28 mm diameter lampshade

Rosette, bell, claw and socket cover

Brass suspension claw for light fitting or lampshade - diameter 28 mm for E14...

DIY149228089-28

€4.90

Brass suspension claw to hold a lampshade or glass luminaire with integrated lampholder.

Lampholder and base

Smooth black plastic E14 base lampholder for lamps fitted with a lampholder cap

Douille-lisse-E14-noir

€2.25

E14 lampholder in smooth black self-extinguishing plastic for incandescent, halogen or low-energy lamps,

Socket with E12 base in smooth black plastic for bulb

Lampholder and base

Socket with E12 base in smooth black plastic for lamps fitted with a socket cover

Douille-lisse-E12-noir

€1.96

E12 lampholder in smooth black self-extinguishing plastic for incandescent, halogen or low-energy lamps,

Dummy candle D22 for chandelier colour white 100mm

Lighting and lighting design

Dummy candle D22 for chandelier white colour length 100mm

bougie-blanc-100mm-d22

€1.20

White D22 fake candle case with imitation candle wax drippings.

G45 4 watt LED globe bulb with B22 base and four filaments

B22 LED bulbs

4-watt G45 LED globe bulb with B22 base - four dimmable filaments - polyethylene globe

G45 -4W-B22-dim-plas

€5.60

Filament bulbs are back, now with standard dimensions

low stainless steel nut for M12 tube with 1mm pitch

Tube and threaded accessory

low stainless steel nut for M12 tube, 1mm pitch, 6mm thick

écrou-inox-M12-6mm

€0.60

The low stainless steel nuts are perfect for assembling light fittings and chandeliers mounted on M12 hollow rods.

low stainless steel nut for M8 tube with 1mm pitch

Tube and threaded accessory

low stainless steel nut for M8 tube, 1mm pitch, 4mm thick

écrou-inox-M8-4mm

€0.42

The low stainless steel nuts are perfect for assembling light fittings and chandeliers mounted on M8 hollow rods.

M12 stainless steel threaded tube, 1mm pitch

Tools and assembly accessories

Threaded tube in 304 L stainless steel - M12 with 1mm pitch - 1 metre long

DIY-066-inox-M12-1m

€40.00

Hollow stainless steel threaded rod sold individually in M12 standard with 1mm fine pitch for fixing bulb sockets.

M16 stainless steel threaded tube, 1.5 mm pitch

Tools and assembly accessories

Threaded tube in 304 L stainless steel - M16 with 1.5mm pitch - 1 metre long

DIY-066-inox-M16-1m

€72.00

Hollow stainless steel threaded rod sold individually, standard M16 with 1.5mm fine pitch for fixing bulb sockets.

M18 stainless steel threaded tube, 1 mm pitch

Out-of-Stock

Tools and assembly accessories

Threaded tube in 304 L stainless steel - M8 with 1mm pitch - 1 metre long

DIY-066-inox-M8-1m

€27.50

Hollow stainless steel threaded rod sold individually in M8 standard with 1mm fine pitch for fixing bulb sockets.

View

low stainless steel nut for M10 tube with 1mm pitch

Tube and threaded accessory

low stainless steel nut for M10 tube, 1mm pitch, 6mm thick

écrou-inox-M10-6mm

€0.55

The low stainless steel nuts are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

M10 stainless steel threaded tube, 1 mm pitch

Tools and assembly accessories

Threaded tube in 304 L stainless steel - M10 with 1mm pitch - 1 metre long

DIY-066-inox-M10-1m

€34.90

Hollow stainless steel threaded rod sold individually in M10 standard with 1mm fine pitch for fixing bulb sockets.

Ultra-flat LED panel spotlight, diameter 80 mm, 12 volts, 5 watts

LED Panel and Downlight

Kit of 6 ultra-flat LED panels for shelf or cabinet lighting or for decorating bar...

Kit 6 Panels-5watts

€119.70

These spotlights make it easy to install small light sources on shelves or under kitchen units to illuminate work surfaces.

LED Panel and Downlight

Kit of 4 ultra-flat LED panels for shelf or cabinet lighting or for decorating bar...

Kit 4 Panels-5watts

€87.18

These spotlights make it easy to install small light sources on shelves or under kitchen units to illuminate work surfaces.

Kit of 12 LED bottle lighting panels Ø 80mm 12 volts for colour lighting of bar bottles

Decorative coloured LED bulbs

Kit of 6 LED bottle lighting panels Ø 80mm 12 volts for colour lighting of bar bottles

Kit 6 Panel-bouteille

€119.70

This kit of 6 LED plates makes it easy to install light sources under your bar bottles.

LED Deco & Celebrations

Kit of 4 LED bottle lighting panels Ø 80mm 12 volts for colour lighting of bar bottles

Kit 4 Panel-bouteille

€87.18

This kit of 4 LED plates makes it easy to install light sources under your bar bottles.

LED Deco & Celebrations

Kit of 12 LED bottle lighting panels Ø 80mm 12 volts for colour lighting of bar bottles

Kit 12 Panel-bouteille

€228.78

This kit of 12 LED plates makes it easy to install light sources under your bar bottles.

M4 brass screw with knurled head, thread length 4mm

Cable clamp, cable fastener, screws, interlock button

M4 brass screw with slotted head, length to be chosen according to version

vis-laiton-m4L-fendu

€0.25

M4 brass screws for luminaire assembly

LED Panel and Downlight

Kit of 12 ultra-flat LED panels for shelf or cabinet lighting or for decorating bar...

Kit 12 Panels-5watts

€228.78

These spotlights make it easy to install small light sources on shelves or under kitchen units to illuminate work surfaces.

LED bulbs

6-watt E14 base LED six-filament flame bulb - dimmable satin glass

Fil-C35 -6W-E14-dim-sat

€7.20

Filament bulbs are back, now with standard dimensions

LED bulbs

4 watt E14 base - dimmable satin glass four filament LED bulb

Fil-C32 -4W-E14-dim-sat

€6.50

Filament bulbs are back, now with standard dimensions

12 watt LED spherical bulb Ø A60 with E27 base - twelve LED filaments

Spherical LED bulbs

12 watt Ø A60 E27 base spherical LED bulb - twelve dimmable LED filaments - satin glass

Fil -A60 -12W-E27-dim-sat

€9.95

Filament bulbs are back, now with standard dimensions

6 watt LED spherical bulb Ø A60 with E27 base - eight LED filaments

Spherical LED bulbs

8 watt LED spherical bulb Ø A60 E27 base - eight dimmable LED filaments - satin glass

Fil -A60 -8W-E27-dim-sat

€9.60

Filament bulbs are back, now with standard dimensions

Spherical LED bulbs

6 watt LED spherical bulb Ø A60 E27 base - six dimmable LED filaments - satin glass

Fil -A60 -6W-E27-dim-sat

€7.00

Filament bulbs are back, now with standard dimensions

Dummy candle for brass chandelier, length 100mm

Lighting and lighting design

Fake candle D24 material raw brass length 80mm

bougie-laiton-D24-80mm

€9.10

D24 faux candle scabbard in brass with imitation candle wax drippings.

4-watt dimmable LED filament bulb with G9 base

G9 LED bulbs

G9 LED bulb with four LED filaments - dimmable to 4 watts at 230 volts - colour from...

STG971-filament-4-G9

€5.95

The G9 lamp format means this dimmable bulb can be easily integrated into any luminaire,

Programmable Sonoff socket with WiFi control for Smart phone or tablet

Electrical socket and switch

Programmable Sonoff socket with radio frequency or WiFi Smartphone or tablet control

Sonoff-prise

€18.50

Programmable Sonoff switch box, control via Smartphone and digital tablet.

Programmable Sonoff 3-button touch switch with WiFi control for Smart phone or tablet

Electrical socket and switch

Programmable Sonoff switch box with radio frequency or WiFi control Smartphone or tablet

Sonoff-basic

€18.50

Programmable Sonoff switch box, control via Smartphone and digital tablet.

Electrical socket and switch

Sonoff programmable 3-button touch wall switch with WiFi Smartphone or tablet control -...

Sonoff-T2EU-3-blanc

€35.50

Programmable Sonoff touch switch, control via smartphone and digital tablet.

Electrical socket and switch

Sonoff programmable 2-button touch wall switch with WiFi Smartphone or tablet control -...

Sonoff-T2EU-2-blanc

€33.50

Programmable Sonoff touch switch, control via smartphone and digital tablet.

Programmable Sonoff touch switch with WiFi control for Smart phone or tablet

Electrical socket and switch

Sonoff programmable touch wall switch with WiFi Smartphone or tablet control - colour...

Sonoff-T2EU-1-blanc

€28.50

Programmable Sonoff touch switch, control via smartphone and digital tablet.

low zinc-plated nut for M12 tube, 1mm pitch, 5mm thick

Nut and washer

Low zinc-plated nut for M12 tube, 1.5 mm pitch, 5 mm thick

écrou-zinc-M12-pas-1.5m-H5mm

€0.28

Low zinc-plated steel nuts are perfect for assembling light fittings and chandeliers mounted on M12 hollow rods.

Tube and threaded accessory

Square brass sleeve 12 x 12mm with three M8 threads

Manchon-234001-3t

€3.50

This 12 x 12 mm square brass sleeve with three 90° cable entry threads is perfect for assembling M8 hollow rods.

Tube and threaded accessory

Square brass sleeve 12 x 12mm with four M8 threads

Manchon-234001-4t

€3.75

This 12 x 12 mm square brass sleeve with four 90° cable entry threads is perfect for assembling M8 hollow rods.

Tube and threaded accessory

Square brass sleeve 12 x 12mm with five M8 threads

Manchon-234001-5t

€3.95

This 12 x 12 mm square brass sleeve with five 90° cable entry threads is perfect for assembling M8 hollow rods.

brass threaded ring for tube M6 diameter 16mm

Nut and washer

Threaded ring M6 1mm pitch in brass diameter 16mm height 10mm

DIY092-205020-M6

€1.95

Brass bushes are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

M8 brass threaded tube 1mm pitch 50 centimetres

Out-of-Stock

Tools and assembly accessories

M8 brass threaded tube, 1mm pitch - 50 cm long

DIY-066-laiton-M8-50cm

€10.50

Hollow solid brass threaded rod sold individually in M8 standard with 1mm fine pitch for fixing bulb sockets.

View

M12 brass threaded tube 1mm pitch 50 centimetres

Out-of-Stock

Tools and assembly accessories

M12 brass threaded tube, 1mm pitch - 50 cm long

DIY-066-laiton-M12-50cm

€19.00

Hollow solid brass threaded rod sold individually in M12 standard with 1mm fine pitch for fixing bulb sockets.

View

Tools and assembly accessories

M10 brass threaded tube, 1mm pitch - 1 metre long

DIY-066-laiton-M10-1m

€36.00

Hollow solid brass threaded rod sold individually in M10 standard with 1mm fine pitch for fixing bulb sockets.

Threaded brass tube M12 1mm pitch 1 metre

Tools and assembly accessories

M12 brass threaded tube, 1mm pitch - 1 metre long

DIY-066-laiton-M12-1m

€39.00

Hollow solid brass threaded rod sold individually in M12 standard with 1mm fine pitch for fixing bulb sockets.

Threaded brass tube M10 1mm pitch 50 centimetres

Tools and assembly accessories

M8 brass threaded tube, 1mm pitch - 1 metre long

DIY-066-laiton-M8-1m

€29.00

Hollow solid brass threaded rod sold individually in M8 standard with 1mm fine pitch for fixing bulb sockets.

Nut and washer

low zinc-plated nut for M12 tube, 1mm pitch, 5mm thick

écrou-zinc-M12-5mm

€0.28

Low zinc-plated steel nuts are perfect for assembling light fittings and chandeliers mounted on M12 hollow rods.

Nut and washer

Low zinc-plated nut for M18 tube, 1.5 mm pitch, 8 mm thick

écrou-zinc-M18-pas1.5mm-ép8mm

€1.20

Low zinc-plated steel nuts are perfect for assembling light fittings and chandeliers mounted on M18 hollow rods with a 1.5 mm pitch.

Nut and washer

Low zinc-plated nut for M20 tube, 1.5 mm pitch, 9 mm thick

écrou-zinc-M20-1.5mm-ep9mm

€1.45

Low zinc-plated steel nuts are perfect for assembling light fittings and chandeliers mounted on M20 hollow rods.

Nut and washer

Low zinc-plated nut for M16 tube, 1.5 mm pitch, 7 mm thick

écrou-zinc-M16-pas1.5mm-ép7mm

€0.75

Low zinc-plated steel nuts are perfect for assembling light fittings and chandeliers mounted on M16 hollow rods with a 1.5 mm pitch.

low zinc-plated nut for Ø32.2- 11 inch thick 12mm extruded tube

Nut and washer

Low zinc-plated nut for 1" inch G11 threaded tube, 12mm thick

écrou-zinc-1pouce

€3.95

Low zinc-plated steel nuts are perfect for assembling light fittings and chandeliers mounted on M20 hollow rods.

Lampholder and base

E27 chain socket on/off switch white

E27-M/A-chain-blanc

€6.80

E27 base with chain on/off switch for mounting on 10 mm diameter threaded tube.

Brass hexagon nut for M10 threaded tube, 1.5 mm pitch

Out-of-Stock

Tube and threaded accessory

Brass hexagon nut for M10 threaded tube, 1.5 mm pitch

Ecrou-laiton-M10-1.5mm

€0.70

Brass nuts are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

View

Mini format flame bulb with four LED filaments

Product available with different options

LED filament bulb

3 watt E12 base LED mini flame bulb with four filaments - 230 volts

Mini-Flamme-4-filament-E12

€5.60

A 3 watt 230 volt four filament LED flame bulb with a clear glass globe

View

LED filament bulb

3 watt E14 base LED mini flame bulb with four filaments - 230 volts

Mini-Flamme-4-filament

€5.60

A 3 watt 230 volt four filament LED flame bulb with a clear glass globe

Brass suspension ring machined from solid M10 thread

Ring, hook, ball joint and spring

Large cast brass suspension ring 35mm x 28mm M10 thread

DIY147-anneau-UA

€9.40

Large M10 threaded brass suspension ring for mounting lamp sockets or luminaires

Electric cable clamp, brass, M10 thread.

Brass and bronze creation for luminaire

Brass electrical cable clamp with M8 threaded cable gland

serre-cable-laiton-presse-M8

€2.55

Brass electrical cable clamp for light bulb socket or ceiling rose with M8 thread

Brass and bronze creation for luminaire

Brass electrical cable clamp with M12 threaded cable gland

serre-cable-laiton-presse-M12

€2.70

Brass electrical cable clamp for light bulb socket or ceiling rose with M12 thread

Tube and threaded accessory

Low zinc-plated nut for M10 tube, 1.5 mm pitch, 7 mm thick

écrou-zinc-M10x1.5-7mm

€0.40

Low zinc-plated steel nuts are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

Socket, socket cover, spool, dummy plug, cable clamp

Brass Buie leaf wick for chandelier, lamp or candle holder diameter 22mm for M10...

DIY122-Buie

€15.30

Brass wick for chandelier, lamp or candle holder diameter 28mm for M10 threaded tube

Tube and threaded accessory

Brass honeysuckle light point length 70 x 60mm with M10 thread

DIY123-chèvrefeuille

€19.20

A decorative element for assembling M10 brass luminaires and chandeliers.

Socket, socket cover, spool, dummy plug, cable clamp

Brass beech leaf wick for chandelier, lamp or candle holder diameter 22mm for M10...

DIY124-Bobèche

€15.80

Brass wick for chandelier, lamp or candlestick diameter 32mm for M10 threaded tube

Socket, socket cover, spool, dummy plug, cable clamp

Brass fern leaf spool for chandelier, lamp or candle holder diameter 32mm for M10...

DIY125-Bobèche

€26.60

Brass wick for chandelier, lamp or candlestick diameter 32mm for M10 threaded tube

Out-of-Stock

Socket, socket cover, spool, dummy plug, cable clamp

Brass chalice wick for chandelier, lamp or candleholder diameter 30mm for M10 threaded...

DIY126-Bobèche

€14.60

Brass wick for chandelier, lamp or candle holder diameter 30mm for M10 threaded tube

View

Socket, socket cover, spool, dummy plug, cable clamp

Brass oak leaf wick for chandeliers, lamps, candleholders diameter 32mm for M10...

DIY128-Bobèche

€30.40

Brass cup for chandelier, lamp or candlestick diameter 32mm for M10 threaded tube

Decorative hemispherical brass dish, diameter 60mm

Brass and bronze creation for luminaire

Decorative hemispherical brass cap diameter 60mm with M10 thread for chandeliers

DIY129-coupelle-M10

€13.50

Decorative cylindrical brass stopper used in the construction of brass chandeliers or light fittings.

M10 threaded wing nut thread length 10mm

Brass and bronze creation for luminaire

brass screw with M10 threaded butterfly head, thread length 10mm

DIY130-papillon

€12.60

M10 butterfly screw for brass luminaire assembly

Ring, hook, ball joint and spring

Insillot brass ball joint, one quadruple outlet for M10 threaded tube

Rotule-DIY119-Insillot

€33.80

M10 threaded solid brass ball joint for assembling hollow polishing rods

Ring, hook, ball joint and spring

Insillot brass ball joint, one triple outlet for M10 threaded tube

Rotule-DIY118-Insillot

€28.90

M10 threaded solid brass ball joint for assembling hollow polishing rods

Brass sleeve Barlettani brass ball joint, one joint for M10 threaded tube with 1mm pitch

Out-of-Stock

Ring, hook, ball joint and spring

Barlettani brass ball joint, a joint for M10 threaded tube with 1mm pitch

Rotule-DIY117-Barlettani

€19.80

M10 threaded solid brass ball joint for assembling hollow polishing rods

View

E27 screw lampholder in steel with bronze chrome finish

Lampholder and base

E27 Neliam screw lampholder in steel with bronze chrome finish

DIY-067 E27 acier chrome bronze

€9.90

A resolutely modern bronze chrome lampholder for use with E27 incandescent or low-energy bases,

M6 brass screw with knurled domed head, length 12mm

Cable clamp, cable fastener, screws, interlock button

M6 brass screw with knurled domed head, thread length 12mm

DIY-210139-M6-BV

€1.50

Screws and bolts for brass luminaire assembly

Lampholder and base

E27 hygie lampholder in solid brass for Edison style single ring lamp

DIY112233085-hygie

€23.60

E27 lampholder in hygie brass for a resolutely neo-retro style, ideal for Edison-style incandescent or LED filament lamps,

Tethys socket in solid brass with E27 base

Lampholder and base

E27 Tethys lampholder in solid brass for Edison style single ring lamp

DIY113233088-Tethys

€30.20

E27 socket in Tethys brass for a resolutely neo-retro style, ideal for Edison-style incandescent or LED filament lamps,

Out-of-Stock

Lampholder and base

Niels lampholder in solid brass with G9 E12 or E14 base depending on version - double...

DIY114233083-Niels

€9.90

E12 E14 or G9 lampholder in Niels brass for a resolutely neo-retro style, ideal for Edison-style incandescent or LED filament lamps,

View

Heraclite E27 lampholder with brass rotary knob

Lampholder and base

E27 Heraclite lampholder with solid brass rotary knob for Edison double-ring style lamp

DIY111233054-E27-Héraclite

€16.50

Heraclite E27 brass lampholder for a resolutely neo-retro style, ideal for Edison-style incandescent or LED filament lamps,

Lampholder and base

Avicenne E14 lampholder in machined solid brass for Edison-style lamp with double...

DIY110233079-avicenne

€13.50

E14 lampholder in vintage brass, for a resolutely neo-retro style, ideal for Edison-style incandescent or LED filament lamps,

Out-of-Stock

Tools and assembly accessories

M10 brass threaded tube, 1mm pitch - 50cm long

DIY-066-laiton-50cm

€18.00

Hollow solid brass threaded rod sold individually in M10 standard with 1mm fine pitch for fixing bulb sockets.

View

Brass and bronze creation for luminaire

Brass knurled nut for M12 threaded tube for lighting fixtures, external diameter 15mm

DIY101215010-M12

€0.75

M12 brass knurled nut, 2mm thick, used in the construction of chandeliers and luminaires

Decorative steel square head nails size 42 x 42mm

The antique dealers' corner

Square-headed decorative steel nails, size 42 x 42mm, for decorating medieval furniture...

DIY131

€6.36

Steel nails ideal for decorating medieval furniture or doors

Decorative forged iron nails diameter 36mm

Tools and assembly accessories

Hammered-head nails in decorative steel, diameter 36mm, to decorate a piece of...

DIY132

€6.80

Steel nails ideal for decorating medieval furniture or doors

Decorative forged iron nails diameter 35mm

Tools and assembly accessories

Hammered-head nails in decorative steel, diameter 35mm, to decorate a piece of...

DIY133

€2.75

Steel nails ideal for decorating medieval furniture or doors

Decorative forged iron nails diameter 12mm

Tools and assembly accessories

19mm diameter hammered steel nails to decorate medieval furniture and doors

DIY134

€2.75

Steel nails ideal for decorating medieval furniture or doors

Tools and assembly accessories

Decorative steel nails with half-round heads, diameter 12mm, to decorate a piece of...

DIY135-R1-D12

€0.44

Steel nails ideal for decorating medieval furniture or doors

Decorative forged iron nails diameter 15mm

Tools and assembly accessories

Decorative steel nails with half-round head, diameter 15mm, for decorating a piece of...

DIY136-R2-D15

€0.80

Steel nails ideal for decorating medieval furniture or doors

Decorative forged iron nails diameter 26mm

Tools and assembly accessories

Decorative steel nails with half-round head, diameter 26mm, for decorating a piece of...

DIY137-R3-D26

€3.20

Steel nails ideal for decorating medieval furniture or doors

Decorative forged iron nails diameter 47mm

Tools and assembly accessories

Decorative steel nails with half-round head, diameter 30mm, for decorating a piece of...

DIY138-R4-D30

€3.50

Steel nails ideal for decorating medieval furniture or doors

Tools and assembly accessories

Decorative steel nails with half-round head, diameter 40mm, for decorating a piece of...

DIY139-R5-D40

€5.20

Steel nails ideal for decorating medieval furniture or doors

Tools and assembly accessories

Decorative steel nails with half-round head, diameter 47mm, to decorate a piece of...

DIY140-R6-D47

€8.80

Steel nails ideal for decorating medieval furniture or doors

Decorative forged iron nails diameter 50mm

Tools and assembly accessories

Decorative steel nails with half-round head, diameter 5cm, to decorate a piece of...

DIY141-R7-D50

€11.20

Steel nails ideal for decorating medieval furniture or doors

Decorative forged iron nails diameter 60mm

Tools and assembly accessories

Decorative steel nails with half-round head, diameter 7cm, to decorate a piece of...

DIY143-R9-D70

€18.40

Steel nails ideal for decorating medieval furniture or doors

Tools and assembly accessories

Decorative steel nails with half-round heads, diameter 6cm, to decorate a piece of...

DIY142-R8-D60

€12.40

Steel nails ideal for decorating medieval furniture or doors

Decorative forged iron nails diameter 80mm

Tools and assembly accessories

Decorative steel nails with a half-round head, diameter 8cm, to decorate a piece of...

DIY144-R10-D80

€24.10

Steel nails ideal for decorating medieval furniture or doors

Decorative forged iron nails diameter 98mm

Tools and assembly accessories

Decorative steel nails with half-round head, diameter 10cm, for decorating a piece of...

DIY145-R11-D98

€38.50

Steel nails ideal for decorating medieval furniture or doors

Tools and assembly accessories

Threaded brass tube M10 1mm pitch - 10 cm long

DIY120

€5.20

Brass threaded tube for fixing bulb sockets, tube length 10 cm.

Power cable and extension lead

Plug or socket 230 volts 2 poles - 2.5 amps colours white or black

prise-mâle-230V-2 P 2.5A

€2.40

Socket for 230-volt high-power electrical equipment

Chain, cable, rope, ball and pendant

Brass cable entry terminal - M12 threaded for suspended cable

DIY100209041

€1.35

Brass bollard for passing electrical wires through a suspended cable.

M10 knurled brass plug, diameter 18mm with Ø 4mm hole

Brass and bronze creation for luminaire

18 mm diameter M10 knurled brass plug with Ø 4 mm hole for light fittings

DIY100209040

€1.10

Decorative brass stopper used in the construction of brass chandeliers or light fittings.

38mm diameter brass stopper with 10.5mm Ø hole

Brass and bronze creation for luminaire

38mm diameter brass plug with 10.5mm Ø hole for chandeliers

DIY100207039

€6.20

Decorative brass stopper used in the construction of brass chandeliers or light fittings.

Socket, socket cover, spool, dummy plug, cable clamp

Bobèche - Brass cup for chandelier, lamp or candlestick diameter 22mm thread M10

DIY099224083

€1.80

Brass cup for chandelier, lamp or candlestick diameter 22mm thread M10

Socket, socket cover, spool, dummy plug, cable clamp

Bobèche - Brass socket for chandelier, lamp or candlestick diameter 33mm M10 threaded

DIY099224082

€4.40

Brass cup for chandelier, lamp or candle-holder diameter 33mm thread M10

Out-of-Stock

Socket, socket cover, spool, dummy plug, cable clamp

Bobèche - Brass socket for chandelier lamp or candlestick diameter 29mm threaded M10

DIY099224081

€2.75

Brass cup for chandelier, lamp or candlestick diameter 29mm thread M10

View

Socket, socket cover, spool, dummy plug, cable clamp

Bobèche - Brass cup for chandelier, lamp or candlestick diameter 31mm threaded M10

DIY099224055

€3.00

Brass cup for chandelier, lamp or candlestick diameter 31mm thread M10

Socket, socket cover, spool, dummy plug, cable clamp

Bobèche - Brass socket for chandelier, lamp or candlestick diameter 30mm threaded M10

DIY099224040

€3.80

Brass cup for chandelier, lamp or candlestick diameter 30mm thread M10

Socket, socket cover, spool, dummy plug, cable clamp

Bobèche - Brass socket for chandelier, lamp or candlestick diameter 19mm threaded M10

DIY099224033

€1.45

Brass cup for chandelier, lamp or candlestick diameter 19mm thread M10

Socket, socket cover, spool, dummy plug, cable clamp

Bobèche - Brass cup for chandelier, lamp or candlestick diameter 26mm thread M10

DIY099224030

€5.20

Brass cup for chandelier, lamp or candlestick diameter 26mm thread M10

Socket, socket cover, spool, dummy plug, cable clamp

Bobèche - Brass cup for chandelier, lamp or candlestick diameter 28mm threaded M10

DIY099224022

€5.80

Brass cup for chandelier, lamp or candlestick diameter 28mm thread M10

Socket, socket cover, spool, dummy plug, cable clamp

Bobèche - Brass cup for chandelier, lamp or candlestick diameter 29mm thread M10

DIY099224020

€2.80

Brass cup for chandelier, lamp or candlestick diameter 29mm thread M10

Socket, socket cover, spool, dummy plug, cable clamp

Bobèche - Brass cup for chandelier, lamp or candlestick diameter 19mm threaded M10

DIY099224018

€1.50

Brass cup for chandelier, lamp or candlestick diameter 19mm thread M10

Out-of-Stock

Socket, socket cover, spool, dummy plug, cable clamp

Bobèche - Brass cup for chandelier lamp or candlestick diameter 23.5mm threaded M10

DIY099224008

€1.80

Brass cup for chandelier lamp or candle holder diameter 23.5mm thread M10

View

Socket, socket cover, spool, dummy plug, cable clamp

Bobèche - brass cup for chandelier, lamp or candlestick diameter 27mm thread M10

DIY099224004

€2.10

Brass cup for chandelier, lamp or candlestick diameter 27mm thread M10

24mm diameter ringed hemispherical brass stopper

Brass and bronze creation for luminaire

24mm diameter ringed hemispherical brass plug with M10 thread for lighting fittings

DIY097222011

€1.40

Ringed hemispherical brass stopper used for the construction of brass chandeliers or light fittings.

Decorative hemispherical brass stopper diameter 23mm

Brass and bronze creation for luminaire

Decorative hemispherical brass plug with 23mm diameter and M10 thread for chandeliers

DIY097222010

€1.60

Decorative hemispherical brass stopper used in the construction of brass chandeliers or light fittings.

20mm diameter knurled hemispherical brass stopper

Brass and bronze creation for luminaire

Knurled hemispherical brass plug with 20mm diameter and M10 thread for lighting fittings

DIY097222006

€1.20

Knurled hemispherical brass stopper used for the construction of brass chandeliers or luminaires.

Knurled hemispherical brass stopper, diameter 19mm

Brass and bronze creation for luminaire

Knurled hemispherical brass plug with 19mm diameter and M10 thread for lighting fittings

DIY097222003

€1.10

Knurled hemispherical brass stopper used for the construction of brass chandeliers or luminaires.

Decorative hemispherical brass stopper, diameter 28mm

Brass and bronze creation for luminaire

Decorative hemispherical brass plug with 28mm diameter and M10 thread for chandeliers

DIY097222002

€2.05

Decorative hemispherical brass stopper used in the construction of brass chandeliers or light fittings.

Decorative hemispherical brass stopper, diameter 18mm

Brass and bronze creation for luminaire

Decorative 18mm diameter hemispherical brass plug with M10 thread for chandeliers

DIY097222001

€0.90

Decorative cylindrical brass stopper used in the construction of brass chandeliers or light fittings.

Brass and bronze creation for luminaire

18mm diameter decorative cylindrical brass plug with M10 thread for chandeliers

DIY097209021

€1.50

Decorative cylindrical brass stopper used in the construction of brass chandeliers or light fittings.

Brass and bronze creation for luminaire

20mm diameter decorative cylindrical brass plug with M10 thread for chandeliers

DIY097209008

€2.10

Decorative cylindrical brass stopper used in the construction of brass chandeliers or light fittings.

Decorative brass ball cap nut with 6-sided M10 threaded base

Brass and bronze creation for luminaire

15.5mm diameter decorative cylindrical brass plug with M10 thread for chandeliers

DIY097209001

€1.20

Decorative cylindrical brass stopper used in the construction of brass chandeliers or light fittings.

Brass and bronze creation for luminaire

Brass lock washer for M10 threaded tube for lighting fixtures, external diameter 18mm

DIY101215024

€1.80

M10 brass notched washer, 3mm thick, used in the construction of chandeliers and luminaires

Brass ring - nut diameter 9mm for M4 threaded tube

Nut and washer

Brass ring - nut diameter 9mm for threaded tube M4 height 2mm

DIY101215020

€1.52

M4 brass ring nuts are perfect for assembling light fittings and chandeliers mounted on hollow rods.

Nut and washer

Brass ring - nut diameter 9mm for threaded tube M6 height 2mm

DIY101215012

€1.50

M6 brass ring nuts are perfect for assembling light fittings and chandeliers mounted on hollow rods.

Slightly rounded notched brass washer for M10 threaded tube

Brass and bronze creation for luminaire

Slightly rounded notched brass washer for threaded tube M10 external diameter 13mm

DIY101215005

€1.35

M10 brass notched washer, 3mm thick, used in the construction of chandeliers and luminaires

Nut and washer

Brass ring - nut diameter 9mm for threaded tube M5 height 2mm

DIY101215004

€1.32

M5 brass ring nuts are perfect for assembling light fittings and chandeliers mounted on hollow rods.

Brass and bronze creation for luminaire

Notched brass washer for M10 threaded tube for lighting fixtures, external diameter 13mm

DIY101215003-M10

€0.75

M10 brass notched washer, 2mm thick, used in the construction of chandeliers and luminaires

Tools and assembly accessories

Brass tube, diameter 8mm, length 1 metre

Tube-laiton-Ø8mm-1m

€24.75

Brass tube for fixing bulb sockets, tube length 1 metre.

Tools and assembly accessories

Brass tube, diameter 6mm, length 1 metre

Tube-laiton-Ø6mm-1m

€22.30

Brass tube for fixing bulb sockets, tube length 1 metre.

Tools and assembly accessories

Brass tube, diameter 10mm, length 1 metre

Tube-laiton-Ø10mm-1m

€29.75

Brass tube for fixing bulb sockets, tube length 1 metre.

Mini G4 Holder in machined solid brass for G4 lamp - M6 threaded

Lampholder and base

D11 brass socket with M6 thread for G4 incandescent or LED filament lamps

D11-227013-m6

€4.20

D11 socket in vintage brass, for a resolutely neo-retro style, ideal for Edison-style incandescent or LED filament lamps,

Out-of-Stock

Column, tube, ball, luminaire tip, suspension ring

Brass tube 12mm outside diameter and 9.9mm inside diameter - 50 centimetres long

Tube-laiton-Ø12mm-50cm

€16.90

Brass tube for fixing bulb sockets, tube length 50 centimetres.

View

Out-of-Stock

Tools and assembly accessories

Brass tube, diameter 8mm, length 50 centimetres

Tube-laiton-Ø8mm-50cm

€9.90

Brass tube for fixing bulb sockets, tube length 50 centimetres.

View

Out-of-Stock

Tools and assembly accessories

Brass tube, 6mm diameter, 50 centimetres long

Tube-laiton-Ø6mm-50cm

€10.30

Brass tube for fixing bulb sockets, tube length 50 centimetres.

View

Tools and assembly accessories

M10 threaded chrome-gold steel tube - length to suit application

Tube-chrome or-M10-double

€1.45

M10 threaded chrome-gold tube for mounting old luminaires, tube length according to declination.

Out-of-Stock

Tools and assembly accessories

Brass tube diameter 10mm length 50 centimetres

Tube-laiton-Ø10mm-50cm

€11.90

Brass tube for fixing bulb sockets, tube length 50 centimetres.

View

LED filament bulb

T26 LED filament bulb with E14 base - 10 to 60 volts AC/DC for 3 watt emergency pack

T26-3W-E14

€5.90

The E14 lamp format makes this bulb easy to fit into any light fitting. It operates on 48 volt direct current.

Brass and bronze creation for luminaire

M10 brass stepped washer for 32mm diameter light fittings

DIY101209063

€2.65

brass washers with Ø 11 mm holes for passing electrical cables.

ball-shaped brass nipple with four M10 threaded outlets

Tube and threaded accessory

Ball-shaped brass sleeve with four M10 threaded outlets

DIY093221041B

€4.90

Ball-shaped brass sleeve with M10 thread for passing electrical cables.

M10 brass sleeve with hex base, 1mm pitch - 25mm long

Screw, nut, threaded tube and plug, sleeve, washer, reducer

Brass sleeve M10 1mm pitch with knurled base - 25mm long

DIY-94216084

€1.10

Hollow brass sleeve sold individually as standard M10 with 1mm fine pitch, length 25mm.

M10 ogive diameter 18mm tapped brass tip

Tube and threaded accessory

Brass luminaire tip, diameter 18mm, M10 threaded, ogive shape

DIY094203018

€2.90

A decorative element for assembling M10 brass luminaires and chandeliers.

M10 threaded brass point, ogive shape, 14mm diameter

Tube and threaded accessory

Brass luminaire tip, diameter 14mm, M10 threaded, ogive shape

DIY094212033

€3.10

A decorative element for assembling M10 brass luminaires and chandeliers.

Brass luminaire tip diameter 28.5mm M10 threaded hat shape

Tube and threaded accessory

Brass luminaire tip, diameter 25mm, M10 threaded, cross drilled Ø 12mm

DIY094221012

€4.90

A decorative element for assembling M10 brass luminaires and chandeliers.

Tube and threaded accessory

Brass luminaire tip diameter 28.5mm M10 threaded hat shape

DIY094224037

€16.80

A decorative element for assembling M10 brass luminaires and chandeliers.

Tube and threaded accessory

29.5mm diameter M10 threaded brass luminaire tip, hat shape

DIY094224035

€17.80

A decorative element for assembling M10 brass luminaires and chandeliers.

Brass luminaire tip - brass trim reduction M10 to M4

Brass and bronze creation for luminaire

Brass luminaire tip with M10 to M4 trim reduction

DIY094212085

€2.04

Brass trim reducer M10 to M4 tapping

Tube and threaded accessory

18mm diameter M10 threaded teardrop-shaped brass light fitting tip

DIY094212084

€1.65

A decorative element for assembling M10 brass luminaires and chandeliers.

Tube and threaded accessory

22mm diameter M10 threaded teardrop-shaped brass light fitting tip

DIY094212082

€5.40

A decorative element for assembling M10 brass luminaires and chandeliers.

Tube and threaded accessory

12mm diameter M6 threaded teardrop-shaped brass light fitting tip

DIY094212080

€2.90

A decorative element for assembling M6 brass luminaires and chandeliers.

Tube and threaded accessory

21.5mm diameter M10 threaded brass luminaire tip, hat shape

DIY094212063

€2.40

A decorative element for assembling M10 brass luminaires and chandeliers.

Tube and threaded accessory

19mm diameter M10 threaded brass luminaire tip, hat shape

DIY094212059

€1.80

A decorative element for assembling M10 brass luminaires and chandeliers.

Tube and threaded accessory

Brass luminaire tip, diameter 40mm, M10 threaded, ball-shaped

DIY094212054

€11.70

A decorative element for assembling M10 brass luminaires and chandeliers.

Tube and threaded accessory

20mm diameter M10 threaded ball knurled brass light point

DIY094212046

€2.50

A decorative element for assembling M10 brass luminaires and chandeliers.

Tube and threaded accessory

24.5mm diameter M10 threaded arrowhead for brass light fitting

DIY094212040

€6.00

A decorative element for assembling M10 brass luminaires and chandeliers.

23.5mm diameter M10 threaded obus-shaped brass luminaire tip

Tube and threaded accessory

23.5mm diameter M10 threaded obus-shaped brass light point

DIY094212038

€5.50

A decorative element for assembling M10 brass luminaires and chandeliers.

14.5mm diameter M10 threaded ball-shaped brass light point

Tube and threaded accessory

14.5mm diameter M10 threaded brass luminaire ball tip with suspension hole

DIY094212034

€2.00

A decorative element for assembling M10 brass luminaires and chandeliers.

Brass luminaire tip diameter 12mm M10 threaded obus shape

Tube and threaded accessory

12mm diameter M10 threaded obus-shaped brass luminaire tip

DIY094212032

€5.90

A decorative element for assembling M10 brass luminaires and chandeliers.

Tube and threaded accessory

30mm diameter M10 threaded brass luminaire tip, hat shape

DIY094212026

€4.75

A decorative element for assembling M10 brass luminaires and chandeliers.

Tube and threaded accessory

17mm diameter M10 threaded brass luminaire tip, hat shape

DIY094212021

€1.92

A decorative element for assembling M10 brass luminaires and chandeliers.

Tube and threaded accessory

20.5mm diameter M10 threaded ball-shaped brass luminaire spike

DIY094212019

€4.32

A decorative element for assembling M10 brass luminaires and chandeliers.

Tube and threaded accessory

14.5mm diameter M10 threaded ball-shaped brass luminaire spike

DIY094212016

€1.32

A decorative element for assembling M10 brass luminaires and chandeliers.

M10 threaded brass point, short ball shape, diameter 17mm

Tube and threaded accessory

17mm diameter M10 threaded brass light point, short ball shape

DIY094212015

€2.10

A decorative element for assembling M10 brass luminaires and chandeliers.

M10 threaded brass point with 16mm diameter obus shape

Tube and threaded accessory

Brass luminaire tip, diameter 16mm, M10 threaded, obus shape

DIY094212013

€3.00

A decorative element for assembling M10 brass luminaires and chandeliers.

M10 threaded brass ball point, diameter 18mm

Tube and threaded accessory

Brass luminaire tip, diameter 18mm, M10 threaded, ball-shaped

DIY094212009

€2.10

A decorative element for assembling M10 brass luminaires and chandeliers.

M10 threaded brass ball point, diameter 17mm

Tube and threaded accessory

17mm diameter M10 threaded ball-shaped brass luminaire spike

DIY094212008

€2.10

A decorative element for assembling M10 brass luminaires and chandeliers.

M10 threaded brass ball point, diameter 17.5mm

Tube and threaded accessory

17.5mm diameter M10 threaded ball-shaped brass luminaire spike

DIY094212003

€2.30

A decorative element for assembling M10 brass luminaires and chandeliers.

M10 threaded brass ball point, diameter 14.5mm

Tube and threaded accessory

14.5mm diameter M10 threaded ball-shaped brass luminaire spike

DIY094212002

€2.10

A decorative element for assembling M10 brass luminaires and chandeliers.

M10 threaded brass ball point, diameter 15mm

Tube and threaded accessory

Brass luminaire tip diameter 15mm M10 threaded ball shape

DIY094212001

€2.10

A decorative element for assembling M10 brass luminaires and chandeliers.

M10 threaded brass point, ogive shape, 16mm diameter

Tube and threaded accessory

Brass luminaire tip, diameter 16mm, M10 threaded, ogive shape

DIY094208019

€3.10

A decorative element for assembling M10 brass luminaires and chandeliers.

M10 threaded brass ball point, diameter 19mm

Tube and threaded accessory

19mm diameter M10 threaded ball-shaped brass luminaire spike

DIY094204042

€3.60

A decorative element for assembling M10 brass luminaires and chandeliers.

M10 ball-point brass spike, diameter 25mm

Tube and threaded accessory

Brass luminaire spike diameter 25mm M10 threaded ball shape

DIY094204032

€6.95

A decorative brass element for assembling luminaires on M10 hollow rods.

M6 threaded brass ball point, diameter 25mm

Tube and threaded accessory

Brass luminaire spike diameter 25mm M6 threaded ball shape

DIY094204021

€6.96

A decorative brass element for assembling luminaires on M6 hollow rods.

Out-of-Stock

Tools and assembly accessories

Hand die holder with 65mm cage diameter and two removable steel handles

Porte-filière-65mm

€38.75

Closed or slotted cage die holder in 65mm diameter with removable handles

View

Out-of-Stock

Tools and assembly accessories

55mm cage diameter hand die holder with two removable steel handles

Porte-filière-55mm

€32.75

55mm diameter closed or slotted cage die holder with removable handles

View

Tools and assembly accessories

45mm cage diameter hand die holder with two removable steel handles

Porte-filière-45mm

€28.75

Closed or slotted cage die holder in 45mm diameter with removable handles

Out-of-Stock

Tools and assembly accessories

16mm cage diameter hand die holder with two removable steel handles

Porte-filière-16mm

€18.75

Closed or slotted cage die holder in 16mm diameter with removable handles

View

Tools and assembly accessories

25mm cage diameter hand die holder with two removable steel handles

Porte-filière-25mm

€20.75

Closed or slotted cage die holder in 25mm diameter with removable handles

Tube and threaded accessory

Chrome-plated steel trim reduction M10 to M6 with locking screw

Réduction-M10-M6

€1.00

Chrome-plated steel reducer with M10 to M6 thread

Tube and threaded accessory

Chrome-plated steel trim reduction M10 to M8 with locking screw

Réduction-M10-M8

€1.00

Chrome-plated steel reducer with M10 to M8 thread

Zinc-plated serrated washer for M16 threaded tube

Tube and threaded accessory

Zinc-plated serrated fan washer for M16 threaded tube

Rondelle dentelée M16

€0.48

This fan lock washer is particularly suitable for assembling luminaires fitted with a socket on a hollow stem.

Zinc-plated serrated washer for M14 threaded tube

Nut and washer

Zinc-plated serrated fan washer for M14 threaded tube

Rondelle dentelée M14

€0.42

This fan lock washer is particularly suitable for assembling luminaires fitted with a socket on a hollow stem.

Zinc-plated serrated washer for M12 threaded tube

Tube and threaded accessory

Zinc-plated serrated fan washer for M12 threaded tube

Rondelle dentelée M12

€0.24

This fan lock washer is particularly suitable for assembling luminaires fitted with a socket on a hollow stem.

Zinc-plated serrated washer for M8 threaded tube

Tube and threaded accessory

Zinc-plated serrated fan washer for M8 threaded tube

Rondelle dentelée M8

€0.10

This fan lock washer is particularly suitable for assembling luminaires fitted with a socket on a hollow stem.

Zinc-plated serrated washer for M6 threaded tube

Tube and threaded accessory

Zinc-plated serrated fan washer for M6 threaded tube

Rondelle dentelée M6

€0.10

This fan lock washer is particularly suitable for assembling luminaires fitted with a socket on a hollow stem.

M4 brass screw with knurled head, thread length 10mm

Cable clamp, cable fastener, screws, interlock button

Brass-finish steel screw M4, oval-head, large cross-head, thread length 10mm

vis-laiton-m4L-10-cruci

€0.25

M4 brass-look steel screws for luminaire assembly

M3 brass screw with knurled head, thread length 9mm

Cable clamp, cable fastener, screws, interlock button

Brass screw M4, oval head, large cross-head, thread length 8mm

vis-laiton-m4L-8-cruci

€0.22

M4 brass-look steel screws for luminaire assembly

Cable clamp, cable fastener, screws, interlock button

M3 brass slotted headless screw, thread length 6mm

vis-laiton-m3L-6-fendu

€0.22

M3 brass screws for luminaire assembly

Knurled decorative brass cap nut with M3 thread, 10mm diameter

Brass and bronze creation for luminaire

M3 knurled decorative brass cap nut with 10mm dia. thread for light fittings

DIY095-210056

€1.00

Decorative brass cap nut with knurling Ø 10mm used for the construction of brass chandeliers or luminaires.

M3 knurled decorative brass cap nut for Ø 10mm

Brass and bronze creation for luminaire

M10 knurled decorative brass cap nut with 15mm dia. thread for light fittings

DIY095-210070

€2.20

Decorative brass cap nut with knurling Ø 10mm used for the construction of brass chandeliers or luminaires.

Decorative brass cap nut with knurled hemispherical head and M5 thread for Ø 10mm

Brass and bronze creation for luminaire

Decorative brass cap nut with knurled hemispherical head M5 Ø 10mm for lighting fittings

DIY095-210004

€1.00

Decorative brass cap nut with knurling Ø 10mm used for the construction of brass chandeliers or luminaires.

M5 knurled head decorative brass cap nut for lighting fittings

Brass and bronze creation for luminaire

M5 Ø 12mm knurled hemispherical head decorative brass cap nut for lighting fittings

DIY095-210036

€1.00

Decorative brass cap nut with knurling Ø 12mm used for the construction of brass chandeliers or luminaires.

Kit of four stainless steel cables for LED panel

Chain, cable, rope, ball and pendant

Kit of four stainless steel cables with fixing system for LED panel, length depending...

Kit-4-cables

€7.44

Kit of four cables for hanging LED panels

Decorative brass cap nut, short knurled head, tapped M5

Brass and bronze creation for luminaire

M5 tapped knurled short head decorative brass cap nut for lighting fittings

DIY095-210015

€1.00

Decorative brass cap nut with knurling Ø 9mm used for the construction of brass chandeliers or luminaires.

M6 tapped knurled hemispherical head decorative brass cap nut for lighting fittings

Brass and bronze creation for luminaire

Decorative brass cap nut with knurled hemispherical head M6 Ø 12mm for lighting fittings

DIY095-210007

€1.00

Decorative brass cap nut with knurling Ø 12mm used for the construction of brass chandeliers or luminaires.

Decorative brass cap nut, hemispherical knurled head, M6 threaded

Brass and bronze creation for luminaire

M6 tapped knurled hemispherical head decorative brass cap nut for lighting fittings

DIY095-210003

€1.00

Decorative brass cap nut with knurling Ø 12mm used for the construction of brass chandeliers or luminaires.

Knurled decorative brass cap nut with M6 thread

Brass and bronze creation for luminaire

M5 tapped knurled decorative brass cap nut for lighting fittings

DIY095-204016

€1.00

Decorative ball-shaped brass cap nut with knurling Ø 12mm used for the construction of brass chandeliers or luminaires.

Brass and bronze creation for luminaire

M5 threaded decorative brass ball cap nut for lighting fittings

DIY095-204011

€1.10

Decorative Ø 10mm ball-shaped brass cap nut used in the construction of brass chandeliers or light fittings.

Brass and bronze creation for luminaire

Decorative brass ball cap nut with M10 threaded hexagonal profile for lighting fittings

DIY095-204009

€1.00

Decorative ball-shaped brass cap nut with hex base used for the construction of brass chandeliers or light fittings.

Brass and bronze creation for luminaire

M6 threaded decorative brass ball cap nut for lighting fittings

DIY095-204004

€1.10

Decorative Ø 10mm ball-shaped brass cap nut used in the construction of brass chandeliers or light fittings.

Brass and bronze creation for luminaire

M6 tapped knurled decorative brass cap nut for lighting fittings

DIY095-204002

€1.00

Decorative ball-shaped brass cap nut with knurling Ø 12mm used for the construction of brass chandeliers or luminaires.

Knurled decorative cylindrical brass cap nut with M4 thread

Brass and bronze creation for luminaire

M4 tapped decorative knurled brass cap nut for lighting fittings

DIY095-210031

€1.00

Decorative brass cylindrical cap nut with knurling Ø 8mm used for the construction of brass chandeliers or luminaires.

M4 knurled ball head cap nut in decorative brass

Brass and bronze creation for luminaire

M4 tapped knurled ball head decorative brass cap nut for lighting fittings

DIY095-210023

€1.10

Decorative brass cap nut with knurling Ø 10mm used for the construction of brass chandeliers or luminaires.

Decorative brass cap nut with knurled hemispherical head and M4 thread

Brass and bronze creation for luminaire

M4 tapped knurled hemispherical head decorative brass cap nut for lighting fittings

DIY095-210018

€1.00

Decorative brass cap nut with knurling Ø 12mm used for the construction of brass chandeliers or luminaires.

Knurled decorative brass cap nut with M4 thread

Brass and bronze creation for luminaire

M4 tapped decorative brass ball cap nut for lighting fittings

DIY095-204044

€1.00

Decorative ball-shaped brass cap nut with knurling Ø 12mm used for the construction of brass chandeliers or luminaires.

Brass and bronze creation for luminaire

M4 threaded decorative brass ball cap nut for lighting fittings

DIY095-204008

€1.10

Decorative Ø 10mm ball-shaped brass cap nut used in the construction of brass chandeliers or light fittings.

Tube and threaded accessory

Stainless steel reducer size according to version

Réduction-inox

€3.24

Stainless steel reducer ISO internal - external thread - choice of dimensions

M10 brass triple outlet olive nut sleeve

Tube and threaded accessory

M10 brass olive nut sleeve with triple M10 thread outlets

DIY093-221041

€2.90

This olive-shaped brass sleeve with three cable entry threads is perfect for assembling M10 hollow rods.

Tube and threaded accessory

M12 to M10 brass reduction sleeve, olive type, 12 mm high

DIY093-220012

€1.50

A decorative brass element for assembling the luminaires, allowing cables to be installed on M10 hollow rods.

Smooth brass sleeve with double cone for threaded tube M6 length 15mm

Tube and threaded accessory

Smooth brass sleeve with double cone for M6 threaded pipes, height 15mm

DIY093-219024

€0.82

A decorative brass element for assembling the luminaires, allowing cables to pass through on M6 hollow rods.

Tapered cylindrical brass sleeve, 3 turns, M10 threaded

Tube and threaded accessory

Cylindrical brass sleeve, ringed, 3 turns, M10 threaded, 1mm pitch

DIY93-209024

€2.20

M10 threaded solid brass corrugated sleeve for assembling hollow polishing rods

Brass ring - nut diameter 20.5mm thickness 6mm

Nut and washer

Brass ring - nut diameter 20.5mm for threaded tube M10 height 6mm

DIY093-202022

€1.64

Brass bushes are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

Brass ring - nut diameter 24mm thickness 14mm

Nut and washer

Brass ring - nut diameter 24mm for M10 threaded tube, height 14mm

DIY093-202019

€3.50

Brass bushes are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

Brass ring - nut diameter 35mm thickness 8mm

Nut and washer

Brass ring - nut diameter 35mm for threaded tube M10 height 8mm

DIY093-202018

€4.45

Brass bushes are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

Brass ring - nut diameter 25mm thickness 10mm

Nut and washer

Brass ring - nut diameter 25mm for threaded tube M10 height 10mm

DIY093-202016

€2.70

Brass bushes are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

Brass ring - nut diameter 40mm thickness 8mm

Nut and washer

Brass ring-nut diameter 40mm for threaded tube M10 height 8mm

DIY093-202015

€6.52

Brass bushes are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

Brass ring - nut diameter 25mm thickness 8mm

Nut and washer

Brass ring - nut diameter 25mm for threaded tube M10 height 8mm

DIY093-202014

€2.10

Brass bushes are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

Brass ring - nut diameter 30mm thickness 6mm

Nut and washer

Brass ring - nut diameter 30mm for threaded tube M10 height 8mm

DIY093-202013

€3.48

Brass bushes are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

Nut and washer

Brass ring - nut diameter 20.5mm for threaded tube M10 height 6mm

DIY093-202012

€1.30

Brass bushes are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

Brass ring - nut diameter 22mm thickness 6mm

Nut and washer

Brass ring - nut diameter 22mm for threaded tube M10 height 6mm

DIY093-202010

€1.70

Brass bushes are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

Brass ring - nut diameter 22mm for M10 threaded tube

Nut and washer

Brass ring - nut diameter 22mm for threaded tube M10 height 10mm

DIY093-202009

€1.90

Brass bushes are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

Nut and washer

Brass ring - nut diameter 22mm for threaded tube M10 height 8mm

DIY093-202008

€1.95

Brass bushes are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

Nut and washer

Brass ring-nut, diameter 19mm, for M10 threaded tube, height 6mm

DIY093-202007

€1.00

Brass bushes are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

Brass ring nut for threaded tube M10 diameter 16mm

Nut and washer

Brass ring - nut diameter 16mm for threaded tube M10 height 8mm

DIY093-202006

€0.90

Brass bushes are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

Brass ring diameter 18mm threaded M10 with 33mm wolf's mouth machining

Nut and washer

Brass ring nut diameter 18mm threaded M10 with wolf's mouth machining Ø 33mm

DIY093-202005

€1.00

Brass bushes are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

Brass ring diameter 18mm threaded M10 with radial wolf's mouth machining

Nut and washer

Brass ring nut diameter 18mm threaded M10 with wolf's mouth machining Ø 19mm

DIY093-202004

€1.10

Brass bushes are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

Nut and washer

Brass ring - nut diameter 20mm for threaded tube M10 height 10mm

DIY093-202003

€1.44

Brass bushes are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

Nut and washer

Brass ring-nut, diameter 19mm, for M10 threaded tube, height 8mm

DIY093-202002

€1.20

Brass bushes are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

Brass ring nut for threaded tube M10 diameter 16.5mm

Nut and washer

Brass ring - nut diameter 16.5mm for threaded tube M10 height 6mm

DIY093-202001

€1.20

Brass bushes are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

Nut and washer

16 mm diameter brass tube with M10 thread, 45 mm high

DIY092-205048

€5.90

Brass tubes are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

threaded brass ring for M10 tube 13mm diameter

Nut and washer

M10 brass threaded ring, diameter 12mm, height 20mm

DIY092-205023

€1.25

Brass bushes are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

brass threaded ring for M10 15mm diameter tube

Nut and washer

M10 brass threaded ring, diameter 15mm, height 20mm

DIY092-205022-M10

€2.20

Brass bushes are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

Nut and washer

M10 threaded brass ring, diameter 13mm, height 15mm

DIY092-205021

€1.84

Brass bushes are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

threaded brass ring for M10 tube, 16 mm diameter

Nut and washer

M10 threaded brass ring, diameter 16mm, thickness 10mm

DIY092-205020

€1.60

Brass bushes are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

brass threaded ring for tube M10 diameter 18mm

Nut and washer

M10 threaded brass ring, diameter 18mm, thickness 7mm

DIY092-205017

€1.20

Brass bushes are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

Hexagonal brass sleeve with M10 side hole thread

Tube and threaded accessory

Hexagonal threaded brass socket for M12 electrical tube with side hole

DIY091-225023

€2.95

This hexagonal brass sleeve is perfect for assembling M12 hollow rods.

Tube and threaded accessory

Threaded brass hexagonal socket for M12 electrical tube with side opening

DIY091-225019

€3.36

This hexagonal brass sleeve is perfect for assembling M12 hollow rods.

Tube and threaded accessory

Hexagonal brass bushing M16 to M10 reduction with side drilling

DIY091-225007

€4.60

This M16 M10 hexagonal brass reduction sleeve is perfect for assembling hollow rods.

Tube and threaded accessory

Cylindrical brass sleeve, M16 to M10 reduction, 24 mm diameter

DIY092-205053

€7.50

This M16 to M10 cylindrical brass reduction sleeve is perfect for assembling hollow rods.

Tube and threaded accessory

Hexagonal brass sleeve M12 to M10 reduction with side drilling

DIY091-205031

€1.56

This M12 M10 hexagonal brass reduction sleeve is perfect for assembling hollow rods.

Nut and washer

Low zinc-plated nut for M20 tube, 1.5 mm pitch, 3 mm thick

écrou-zinc-M20-pas1.5mm

€1.20

Low zinc-plated steel nuts are perfect for assembling light fittings and chandeliers mounted on M20 hollow rods.

Nut and washer

Low zinc-plated nut for M16 tube, 1.5 mm pitch, 4 mm thick

écrou-zinc-M16-pas1.5mm

€0.65

Low zinc-plated steel nuts are perfect for assembling light fittings and chandeliers mounted on M16 hollow rods.

Tube and threaded accessory

Low zinc-plated nut for M14 tube, 1.5 mm pitch, 7 mm thick

écrou-zinc-M14-pas1.5mm

€0.55

Low zinc-plated steel nuts are perfect for assembling light fittings and chandeliers mounted on M14 hollow rods.

Tube and threaded accessory

Low zinc-plated nut for M14 tube, 1mm pitch, 7mm thick

écrou-zinc-M14-pas1mm

€0.55

Low zinc-plated steel nuts are perfect for assembling light fittings and chandeliers mounted on M14 hollow rods.

Lampholder and base

Additional ring for chain socket on/off switch

Bague supplémentaire-M/A-chain

€1.00

Additional ring for chain socket with on/off switch for mounting on 10 mm diameter threaded tube.

30mm diameter flanged washer for M10 threaded luminaire - colours in 8 variations

Tools and assembly accessories

Washer with flange diameter 52mm for M10 threaded luminaire - colours in 8 variations

Rondelle-rebord-Ø52

€2.10

Washers with 52mm diameter rim. Choose the colour you need from the range.

Tools and assembly accessories

Washer with flange diameter 45mm for M10 threaded luminaire - colours in 8 variations

Rondelle-rebord-Ø45

€2.00

Washers with 45mm diameter rim. Choose the colour you need from the range.

Tools and assembly accessories

Washer with flange diameter 38mm for M10 threaded luminaire - colours in 8 variations

Rondelle-rebord-Ø38

€1.90

Washers with 38mm diameter rim. Choose the colour you need from the range.

Product available with different options

Tools and assembly accessories

35mm diameter flanged washer for M10 threaded luminaire - colours in 8 variations

Rondelle-rebord-Ø35

€1.80

Washers with 35mm diameter rim. Choose the colour you need from the range.

View

Tools and assembly accessories

Washer with flange diameter 32mm for M10 threaded luminaire - colours in 8 variations

Rondelle-rebord-Ø32

€1.60

Washers with flange in 32mm diameter. Choose the colour you need from the range.

Tools and assembly accessories

Washer with flange diameter 16mm for M10 threaded luminaire - colours in 8 variations

Rondelle-rebord-Ø16

€1.35

Washers with 16mm diameter rim. Choose the colour you need from the range.

Tools and assembly accessories

Washer with flange diameter 19mm for M10 threaded luminaire - colours in 8 variations

Rondelle-rebord-Ø19

€1.38

Washers with 19mm diameter rim. Choose the colour you need from the range.

Tools and assembly accessories

25mm diameter flanged washer for M10 threaded luminaire - colours in 8 variations

Rondelle-rebord-Ø25

€1.43

Washers with 27mm diameter rim. Choose the colour you need from the range.

Sockets, multipliers, risers, adapter sockets

Crimp connector for bakelite G4 base

Connecteur-sertir-G4

€0.05

Crimp plug for G4 bakelite base on bare wire for G4 format bulbs.

Tools and assembly accessories

M10 threaded grey chrome steel tube - length to suit range

Tube-chrome gris-M10-double

€1.32

M10 threaded grey chrome tube for mounting old luminaires, tube length depending on variant.

M10 threaded chrome-plated steel tube with double flanged collar

Tools and assembly accessories

M10 threaded chrome-plated steel tube with two flanged collars - choice of length...

Tube-chromé-M10-double

€1.65

Chrome-plated M10 threaded tube for mounting old luminaires, tube length according to declination.

Mini 2 watt 12 volt LED spotlight on M10 threaded sleeve with spherical lens

Glassware, stoneware, designer lighting

Mini LED spotlight in 12 volts of 3 watts on threaded sleeve M10 spherical lens of...

Lampe-STM1073

€5.40

This mini format means that the bulb can be easily integrated into any luminaire.

Sockets, multipliers, risers, adapter sockets

Mini LED spotlight, green, 12 volts, 3 watts on M10 threaded sleeve

Mini-lampe-STM1073-vert

€5.40

A 3-watt, 12-volt LED spotlight in orange.

Sockets, multipliers, risers, adapter sockets

Mini orange LED spotlight, 12 volts, 3 watts on M10 threaded sleeve

Mini-lampe-STM1073-orange

€5.40

A 3-watt, 12-volt LED spotlight in orange.

Sockets, multipliers, risers, adapter sockets

Mini blue LED spotlight, 12 volts, 3 watts on M10 threaded sleeve

Mini-lampe-STM1073-bleue

€5.40

A 3-watt, 12-volt LED spotlight in blue.

Sockets, multipliers, risers, adapter sockets

Mini red LED spotlight, 12 volts, 3 watts on M10 threaded sleeve

Mini-lampe-STM1073-rouge

€5.40

A 12-volt, 3-watt LED spotlight in red.

Brass sleeve Carducci brass ball joint, one joint for M10 threaded tube with 1mm pitch

Ring, hook, ball joint and spring

Carducci brass ball joint, 180° articulation for M10 threaded tube with 1mm pitch

DIY091-231023-Carducci

€7.20

M10 threaded solid brass ball joint for assembling hollow polishing rods

Brass sleeve Dariofallo brass ball joint, one joint for M10 threaded tube with 1mm pitch

Ring, hook, ball joint and spring

Dariofallo brass ball joint, 90° articulation for M10 threaded tube with 1mm pitch

DIY091-231016-Dariofallo

€7.20

M10 threaded solid brass ball joint for assembling hollow polishing rods

Brass sleeve Moravia brass ball joint, one joint for M10 threaded tube with 1mm pitch

Ring, hook, ball joint and spring

Moravia brass ball joint, 180° articulation for M10 threaded tube with 1mm pitch

DIY091-231005-Moravia

€3.90

M10 threaded solid brass ball joint for assembling hollow polishing rods

Brass sleeve Pirendello brass ball joint, one joint for M10 threaded tube with 1mm pitch

Ring, hook, ball joint and spring

Pirendello brass ball joint, 30° articulation for M10 threaded tube with 1mm pitch

DIY091-231002-Pirendello

€7.20

M10 threaded solid brass ball joint for assembling hollow polishing rods

Brass sleeve Tabucchi brass ball joint, one joint for M10 threaded tube with 1mm pitch

Ring, hook, ball joint and spring

Tabucchi brass ball joint, 15° articulation for M10 threaded tube with 1mm pitch

DIY091-231001-Tabucchi

€7.20

M10 threaded solid brass ball joint for assembling hollow polishing rods

Ring, hook, ball joint and spring

Balmont brass ball joint, a joint for M10 threaded tube with 1mm pitch

DIY091-Balmont-231024

€7.39

M10 threaded solid brass ball joint for assembling hollow polishing rods

Articulated brass hanger for 1/4" threaded tube

Tube and threaded accessory

Hippius articulated brass luminaire suspension for 1/4" threaded tube

Hippius-231017

€18.20

M10 threaded solid brass ball joint for assembling hollow polishing rods

Brass sleeve Orwell brass ball joint, one joint for M10 threaded tube with 1mm pitch

Ring, hook, ball joint and spring

Orwell brass ball joint, a joint for M10 threaded tube with 1mm pitch

Rotule-m10-Orwell-231006

€9.20

M10 threaded solid brass ball joint for assembling hollow polishing rods

Brass sleeve Huxley brass ball joint, one joint for M10 threaded tube with 1mm pitch

Ring, hook, ball joint and spring

Huxley brass ball joint, a joint for M10 threaded tube with 1mm pitch

Rotule-m10-Huxley-231012

€10.20

M10 threaded solid brass ball joint for assembling hollow polishing rods

Ring, hook, ball joint and spring

Carroll brass ball joint, one joint for M10 threaded tube with 1mm pitch

Rotule-m10-Carroll-231030

€11.80

M10 threaded solid brass ball joint for assembling hollow polishing rods

M6 transparent plastic screw, cylindrical head, length 15mm

Out-of-Stock

Cable clamp, cable fastener, screws, interlock button

Clear plastic screw M6 cylindrical head length 15mm sold in packs of 10, 100 or 1000...

vis-cyl-M6-15mm

€0.96

Headless plastic screws for socket glands.

View

M6 transparent plastic screw with cylindrical head, length 12mm

Cable clamp, cable fastener, screws, interlock button

M6 cylindrical head transparent plastic screw, length 12mm sold in packs of 10, 100 or...

vis-cyl-M6-12mm

€0.74

Headless plastic screws for socket glands.

M6 transparent plastic screw, cylindrical head, length 10mm

Cable clamp, cable fastener, screws, interlock button

Clear plastic screw M6 cylindrical head length 10mm sold in packs of 10, 100 or 1000...

vis-cyl-M6-10mm

€0.66

Plastic screws with cylindrical head for socket gland.

M5 transparent plastic screw with cylindrical head, length 12mm

Cable clamp, cable fastener, screws, interlock button

Transparent plastic screw M5 cylindrical head length 12mm sold in packs of 10, 100 or...

vis-cyl-M5-12mm

€0.70

Headless plastic screws for socket glands.

M4 transparent plastic screw with cylindrical head, length 10mm

Cable clamp, cable fastener, screws, interlock button

Clear plastic screw M5 cylindrical head length 10mm sold in packs of 10, 100 or 1000...

vis-cyl-M5-10mm

€0.60

Headless plastic screws for socket glands.

Clear plastic screw M5 with cylindrical head, length 8mm

Cable clamp, cable fastener, screws, interlock button

Clear plastic screw M5 cylindrical head length 8mm sold in packs of 10, 100 or 1000 pieces

vis-cyl-M5-8mm

€0.58

Plastic screws with cylindrical head for socket gland.

Cable clamp, cable fastener, screws, interlock button

M4 transparent plastic screw, cylindrical head, length 10mm sold in packs of 10, 100 or...

vis-cyl-M4-10mm

€0.60

Headless plastic screws for socket glands.

Cable clamp, cable fastener, screws, interlock button

M4 transparent plastic screw with cylindrical head, length 8mm sold in packs of 10, 100...

vis-cyl-M4-8mm

€0.58

Headless plastic screws for socket glands.

Cable clamp, cable fastener, screws, interlock button

M4 transparent plastic screw with cylindrical head, length 6mm sold in packs of 10, 100...

vis-cyl-M4-6mm

€0.48

Plastic screws with cylindrical head for socket gland.

Cable clamp, cable fastener, screws, interlock button

M6 transparent plastic screw, headless, length 10mm sold in packs of 10, 100 or 1000...

vis-trans-M6-10mm

€0.70

Headless plastic screws for socket glands.

Cable clamp, cable fastener, screws, interlock button

M6 transparent plastic screw, headless, length 8mm sold in packs of 10, 100 or 1000 pieces

vis-trans-M6-8mm

€0.68

Headless plastic screws for socket glands.

Cable clamp, cable fastener, screws, interlock button

M6 transparent plastic screw, headless, length 6mm sold in packs of 10, 100 or 1000 pieces

vis-trans-M6-6mm

€0.62

Headless plastic screws for socket glands.

Cable clamp, cable fastener, screws, interlock button

M5 transparent plastic screw, headless, length 8mm sold in packs of 10, 100 or 1000 pieces

vis-trans-M5-8mm

€0.60

Headless plastic screws for socket glands.

M5 transparent plastic screw, headless, length 6mm

Cable clamp, cable fastener, screws, interlock button

M5 transparent plastic headless screw, length 6mm sold in packs of 10, 100 or 1000 pieces

vis-trans-M5-6mm

€0.58

Headless plastic screws for socket glands.

Cable clamp, cable fastener, screws, interlock button

M5 transparent plastic screw, headless, length 4mm sold in packs of 10, 100 or 1000 pieces

vis-trans-M5-4mm

€0.50

Headless plastic screws for socket glands.

M4 transparent plastic screw, headless, length 8mm

Cable clamp, cable fastener, screws, interlock button

M4 transparent plastic headless screw, length 8mm sold in packs of 10, 100 or 1000 pieces

vis-trans-M4-8mm

€0.58

Headless plastic screws for socket glands.

M4 transparent plastic screw, headless, length 6mm

Cable clamp, cable fastener, screws, interlock button

M4 transparent plastic headless screw, length 6mm sold in packs of 10, 100 or 1000 pieces

vis-trans-M4-6mm

€0.52

Headless plastic screws for socket glands.

Cable clamp, cable fastener, screws, interlock button

M4 transparent plastic screw, headless, length 4mm sold in packs of 10, 100 or 1000 pieces

vis-trans-M4-4mm

€0.48

Headless plastic screws for socket glands.

Out-of-Stock

Lampholder and base

Lynch E27 lampholder in natural or satin finish solid brass - short threaded

DIY233121-E27-lynch-laiton-court

€18.90

E27 socket in vintage brass, for a resolutely neo-retro style, ideal for Edison-style incandescent or LED filament lamps,

View

Tube and threaded accessory

Square brass sleeve with six M10 thread outlets

Bloc-laiton-232032

€5.50

This square brass sleeve with sixfold threading for cable routing is perfect for assembling M10 hollow rods.

Square link brass block with centring pin and threaded hole

Tube and threaded accessory

Square link brass block with centring pin and M10 threaded through hole

Bloc-laiton-232020

€8.60

This square-shaped brass block with threaded cable entry is perfect for assembling M10 hollow rods.

Rectangular brass block with through thread M10

Tube and threaded accessory

Rectangular brass block with M10 thread and 11mm diameter hole

Bloc-laiton-232017

€6.80

This rectangular brass block with threaded holes for cable routing is perfect for assembling M10 hollow rods.

Tube and threaded accessory

Flat link brass block with through thread M10

Bloc-laiton-232008

€6.80

This square-shaped brass block with threaded cable entry is perfect for assembling M10 hollow rods.

Tube and threaded accessory

Brass link block with through thread M10

Bloc-laiton-232004

€6.80

This rectangular brass block with threaded cable entry is perfect for assembling M10 hollow rods.

Tube and threaded accessory

90° angled brass link block with M10 thread

Bloc-laiton-232002

€6.40

This rectangular brass block with double tapping for 90° cable routing is perfect for assembling M10 hollow rods.

Tube and threaded accessory

low dichromate nut for M8 tube, 0.75mm pitch, 2.5mm thick

écrou-bichromaté-M8-2.5mm

€0.16

The low, dichromate-coated steel nuts are perfect for assembling light fittings and chandeliers mounted on M8 hollow rods.

Nut and washer

Low zinc-plated nut for M12 tube, 1mm pitch, 3mm thick

écrou-zinc-M12-3mm

€0.20

Low zinc-plated steel nuts are perfect for assembling light fittings and chandeliers mounted on M12 hollow rods.

Tube and threaded accessory

Low zinc-plated nut for M8 tube, 1mm pitch, 3mm thick

écrou-zinc-M8-3mm

€0.15

Low zinc-plated steel nuts are perfect for assembling light fittings and chandeliers mounted on M8 hollow rods.

Tube and threaded accessory

Low zinc-plated nut for M10 tube, 1mm pitch, 3mm thick

écrou-zinc-M10-3mm

€0.15

Low zinc-plated steel nuts are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

low zinc-plated nut for M10 tube, 1mm pitch, 2.2mm thick

Tube and threaded accessory

Low zinc-plated nut for M10 tube, 1mm pitch, 2mm thick

écrou-zinc-M10-2mm

€0.14

Low zinc-plated steel nuts are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

Ring, hook, ball joint and spring

Suspension ring machined brass M16 thread smooth finish

DIY089-218017

€7.20

M16 brass threaded ring for fixing lamp sockets or luminaires

Ring, hook, ball joint and spring

Suspension ring machined brass M26 thread smooth rough finish

DIY089-218010

€20.00

M26 threaded brass ring for fixing lamp sockets or luminaires

mounting ring brass M12 threaded raw ring finish

Ring, hook, ball joint and spring

Suspension ring machined brass M12 thread with raw corrugated finish

DIY089-218003

€5.80

M12 brass threaded ring for fixing lamp sockets or luminaires

Suspension ring machined brass M20 thread smooth finish

Ring, hook, ball joint and spring

Suspension ring machined brass M20 thread, 1.75mm pitch

DIY089-218008-M20-1.75

€9.90

M20 brass threaded ring for fixing lamp sockets or luminaires

Ring, hook, ball joint and spring

Suspension ring machined brass M10 thread smooth rough finish

DIY089-218023

€5.40

M10 brass threaded ring for fixing lamp sockets or luminaires

Ring, hook, ball joint and spring

Knurled knurled brass suspension ring with M10 thread

DIY089-218021

€5.40

M10 threaded brass ring for fixing lamp sockets or luminaires

Ring, hook, ball joint and spring

Knurled knurled brass suspension ring with M12 thread

DIY089-218001

€5.60

M12 threaded brass ring for fixing lamp sockets or luminaires

Cable clamp, cable fastener, screws, interlock button

M4 brass screw with wide knurled cylindrical head, thread length 18mm

DIY090216038

€1.62

Screws and bolts for brass luminaire assembly

Cable clamp, cable fastener, screws, interlock button

M4 brass screw with butterfly head, thread length 4mm

DIY090206059

€1.50

Screws and bolts for brass luminaire assembly

M4 round-head brass screw, thread length 4mm

Cable clamp, cable fastener, screws, interlock button

M4 brass screw with round knurled head, drilled 2mm, thread length 4mm

DIY090210027

€1.52

Screws and bolts for brass luminaire assembly

M4 brass screw with knurled head, thread length 14mm

Cable clamp, cable fastener, screws, interlock button

M4 brass screw with knurled cylindrical head, thread length 14mm

DIY090216013

€1.50

Screws and bolts for brass luminaire assembly

Cable clamp, cable fastener, screws, interlock button

Brass M5 knurled pan head slotted screw thread length 20mm

DIY090216073

€1.60

Screws and bolts for brass luminaire assembly

Cable clamp, cable fastener, screws, interlock button

M4 brass screw with knurled head, thread length 9mm

DIY090216089

€1.40

Screws and bolts for brass luminaire assembly

Cable clamp, cable fastener, screws, interlock button

M3 brass screw with knurled head, thread length 9mm

DIY090216004

€1.40

Screws and bolts for brass luminaire assembly

M5 brass screw with knurled domed head, length 14mm

Cable clamp, cable fastener, screws, interlock button

M5 brass screw with knurled domed head, thread length 14mm

DIY090216092

€1.70

Screws and bolts for brass luminaire assembly

M3 brass screw with knurled head, thread length 16mm

Cable clamp, cable fastener, screws, interlock button

Wide-head knurled brass screw with M3 thread

DIY090216001

€1.80

Screws and bolts for brass luminaire assembly

Cable clamp, cable fastener, screws, interlock button

M4 brass screw with knurled head, thread length 23mm

DIY090216086

€3.00

Screws and bolts for brass luminaire assembly

Cable clamp, cable fastener, screws, interlock button

M4 brass screw with cylindrical head, thread length 7mm

DIY090216104

€1.25

Screws and bolts for brass luminaire assembly

M4 brass screw with knurled head, thread length 12mm

Cable clamp, cable fastener, screws, interlock button

M4 brass screw with knurled head, thread length 8mm

DIY090216028

€1.35

Screws and bolts for brass luminaire assembly

Cable clamp, cable fastener, screws, interlock button

M4 brass screw with knurled head, thread length 12mm

DIY090216065

€1.45

Screws and bolts for brass luminaire assembly

M4 brass screw with domed head, thread length 8mm

Cable clamp, cable fastener, screws, interlock button

Brass screw M6 with domed head, thread length 14mm

DIY090216103

€1.70

Screws and bolts for brass luminaire assembly

Cable clamp, cable fastener, screws, interlock button

M4 brass screw with domed head, thread length 8mm

DIY090216016

€1.40

Screws and bolts for brass luminaire assembly

Cable clamp, cable fastener, screws, interlock button

M5 brass screw with knurled head, thread length 14mm

DIY090216051

€1.50

Screws and bolts for brass luminaire assembly

M4 brass screw with knurled domed head, length 14mm

Cable clamp, cable fastener, screws, interlock button

M4 brass screw with knurled domed head, thread length 14mm

DIY090216009

€1.60

Screws and bolts for brass luminaire assembly

M10 cylindrical brass cable clamp, diameter 15mm, with M4 locking screw

Cable clamp, cable fastener, screws, interlock button

M10 cylindrical brass cable clamp, 12mm diameter, with M4 locking screw

DIY214009-12

€1.95

Cylindrical brass electrical cable clamp for light bulb socket or ceiling rose with M10 thread.

Cable clamp, cable fastener, screws, interlock button

M10 cylindrical brass cable clamp, diameter 15mm, with M4 locking screw

DIY214007-15

€2.60

Cylindrical brass electrical cable clamp for light bulb socket or ceiling rose with M10 thread.

Cable clamp, cable fastener, screws, interlock button

M10 knurled brass electric cable clamp with M6 locking screw

DIY-211011-serre-cable-bm6

€2.70

Knurled brass electrical cable clamp for light bulb socket or ceiling rose with M10 thread.

Cable clamp, cable fastener, screws, interlock button

M10 knurled brass electric cable clamp with M4 locking screw

DIY-211012-Bm4

€2.70

Knurled brass electrical cable clamp for light bulb socket or ceiling rose with M10 thread.

Conical brass cable clamp with M10 thread.

Cable clamp, cable fastener, screws, interlock button

M10 tapered brass electric cable clamp with M4 locking screw

DIY095203003-SC-conique-bm4

€2.60

Conical brass electrical cable clamp for light bulb socket or ceiling rose with M10 thread.

Brass and bronze creation for luminaire

Brass electrical cable clamp with M10 threaded cable gland

serre-cable-laiton-presse-M10

€2.60

Brass electrical cable clamp for light bulb socket or ceiling rose with M10 thread.

Brass and bronze creation for luminaire

Brass washer with M10 hole flange for light fittings - diameter 15 to 50mm

DIY086-laiton-bord

€1.48

Brass washer with flange used for the construction of brass chandeliers or light fittings.

Single-core electrical cable with Teflon sheath

Electrical cable with Teflon sheath, conductor cross-section 0.3mm², choice of colours

cable-teflon-1C-0.3

€0.65

PTFE Teflon electric cable with 0.3mm² wires - length in 1 metre increments

G4 bakelite with self-grip connection on bare wire

Sockets, multipliers, risers, adapter sockets

Mini G4 bakelite cap with Autogrip connection on bare wire

culot-G4-bakelite-autogrip

€0.75

A mini G4 bakelite base on a bare wire for G4 halogen or G4 LED bulbs.

Round electric cable

Coaxial electrical cable on transparent Teflon with two 0.5mm² conductors

cable-coax-0.5mm²

€3.10

Two-core coaxial electrical cable with 0.5 mm² wires - length in 1 metre increments

0.3mm² coaxial electric cable on transparent Teflon, 1m long

Round electric cable

Coaxial electrical cable on transparent Teflon with two 0.3mm² conductors

cable-coax-0.3mm²

€2.59

Two-core coaxial electrical cable with 0.3 mm² wires - length in 1 metre increments

G4 lamp holder for bulkhead feed-through

Out-of-Stock

Sockets, multipliers, risers, adapter sockets

G4 lamp holder on bulkhead sold without G4 base

support-G4-sans-culot

€3.00

This small G4 lamp holder makes it easy to install small light sources simply by going through a partition, on shelves or on kitchen units to light a work surface.

View

304 L stainless steel cable with transparent PVC sheath for LED panels, length 1m

Chain, cable, rope, ball and pendant

Stainless steel cable 304 L Ø 1.5mm PVC sheathed transparent length according to variation

cable-acier-Ø1.5mm

€0.90

PVC-coated stainless steel cable for hanging LED panels

Tube and threaded accessory

Threaded brass sleeve for installation of 30 mm high M10 threaded tubes

DIY105219011

€4.90

A decorative brass element for assembling the luminaires, allowing cables to pass through on M10 hollow rods.

Smooth brass sleeve for M10 threaded pipes, length 20mm

Out-of-Stock

Tube and threaded accessory

Threaded brass sleeve for installation of 20 mm high M10 threaded tubes

Manchon-laiton-fileté-20mm

€4.90

A decorative brass element for assembling the luminaires, allowing cables to pass through on M10 hollow rods.

View

Tube and threaded accessory

Smooth brass sleeve for M10 threaded tubes, length 31mm

Manchon-laiton-lisse-31mm

€8.60

A decorative brass element for assembling the luminaires, allowing cables to pass through on M10 hollow rods.

M10 chrome-plated steel cable feed-through terminal for suspension cable feed-through

Chain, cable, rope, ball and pendant

M10 threaded chrome-plated steel terminal for suspension cable mounting

Borne-cable-suspendu-M10

€0.70

Chrome-plated steel terminal for suspension cable.

Cable clamp, cable fastener, screws, interlock button

M10 chrome-plated steel electrical cable feed-through terminal on suspended cable

Borne-cable-suspendu-M10

€0.70

Chrome-plated steel bollard for passing electrical wires through suspended cables.

Electrical cable terminal on tensioned cable

Cable clamp, cable fastener, screws, interlock button

Chrome-plated steel electrical cable bollard on tensioned cable

Borne-cable-tendu

€0.70

Chrome-plated steel bollard for passing electrical wires over tensioned cable.

Brass reducer for electric threaded tube

Tube and threaded accessory

Reducer for brass electrical threaded tube size according to variant

Réduction-laiton

€1.49

Reducer for electrical brass tube, internal/external thread - choice of dimensions

Brass ring nut for threaded tube M10 diameter 13mm

Nut and washer

Brass ring - nut diameter 13mm for M10 threaded tube

DIY101215002-laiton-M10-13mm

€0.80

Brass bushes are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

Tube and threaded accessory

Hexagonal threaded brass socket for M10 electrical tube with side hole

DIY091225017-M10-laiton-perçage

€6.60

This hexagonal brass sleeve is perfect for assembling M10 hollow rods.

Tube and threaded accessory

Threaded brass hexagonal socket for M10 electrical tube with side opening

DIY091-225022

€6.60

This hexagonal brass sleeve is perfect for assembling M10 hollow rods.

Porcelain bases for G9 lamps on M20.8MM sockets

Sockets, multipliers, risers, adapter sockets

G9 porcelain lamp base for claw support

culot-G9-sur-douille

€1.10

G9 porcelain lampholder for steel base with retaining claws.

Sockets, multipliers, risers, adapter sockets

GH20 lamp socket for G4 or G9 lamp with M10 thread

Douille-GH20

€2.16

This small metal holder can be used to insert G4 or G9 porcelain lampholders.

Mini G4 bakelite base for LED or halogen bulbs

Sockets, multipliers, risers, adapter sockets

Mini G4 bakelite base for LED or halogen lamps

Mini culot-G4-bakelite

€0.50

A mini G4 bakelite base on a bare wire for G4 halogen or G4 LED bulbs.

G4 LED bulbs

ISA G4 base LED bulb with four 2835 LEDs - 2 watts - 12 volts

EFG4-ISA-12

€3.95

The G4 lamp format means this bulb can be easily integrated into any luminaire,

M12 threaded tube with 1mm pitch - 100cm long

Tube and threaded accessory

Threaded tube in galvanised steel M12 with 1.5mm pitch - length 100cm

DIY-085-M12x1.5-100cm

€14.90

Hollow threaded rod sold individually in M12 standard with 1mm fine pitch, 1 metre long.

Classic Théme E27 lampholder in machined solid brass for Edison-style lamp in a choice of 3 colours

Lampholder and base

Classic Théme E27 lampholder machined from solid for loft style Edison 3 colours to...

Douille-E27-Classic-Théme

€32.90

E27 Classic Theme lampholder for a resolutely neo-retro style, ideal for Edison-style incandescent or LED filament lamps.

Flat electric cable

3-conductor flat cable for Dimma color LED strip

cable-dimmacolor

€1.20

Flat electrical cable with three conductors, one red, one green and one white with 0.3mm² wires, length 1m

M10 thread brass electrical cable clamp.

Cable clamp, cable fastener, screws, interlock button

Conical brass electrical cable clamp with cable gland - M10 thread

DIY203002-serre-cable-laiton-con

€2.80

Conical brass electrical cable clamp for light bulb socket or ceiling rose with M10 thread.

Smooth brass bushing 23mm for M10 threaded pipes

Tube and threaded accessory

M10 brass olive sleeve nut for fitting M10 threaded tubes, length 15mm

DIY093-205068

€1.30

A decorative brass element for assembling the luminaires, allowing cables to be installed on M10 hollow rods.

Tube and threaded accessory

Smooth brass sleeve for M10 threaded pipes, length 23mm

Manchon-C01190040-23MM

€5.90

A decorative brass element for assembling the luminaires, allowing cables to pass through on M10 hollow rods.

30mm diameter brass ball with M10 thread

Column, tube, ball, luminaire tip, suspension ring

30mm diameter brass ball with 1mm pitch M10 non-through thread

DIY103229039-M10-Ø30mm

€11.00

Solid brass ball with M10 thread for assembling hollow polishing rods

Brass ball 25mm diameter with M10 thread

Tube and threaded accessory

Brass ball, diameter 25mm, M10 threaded, 1mm pitch, non-through hole

DIY103229026-M10-Ø25mm

€7.90

Solid brass ball with M10 thread for assembling hollow polishing rods

20mm diameter brass ball with M10 thread

Tube and threaded accessory

Brass ball, diameter 20mm, M10 threaded, 1mm pitch, non-through hole

DIY103229019-M10-Ø20mm

€4.90

Solid brass ball with M10 thread for assembling hollow polishing rods

Ring, hook, ball joint and spring

Two-arm spring clamp on M10 rod, size depending on declination

Ressort-deux

€0.85

100mm to 120mm diameter spring for all recessed luminaires.

Nut and washer

Chrome-plated ring nut for M10 threaded tube with M4 screw lock

anneau-ecrou-chrome-M10

€0.70

Chrome-plated steel bushes are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

Round washer Ø 100mm colour for luminaire / M10 threaded lamp socket

Tools and assembly accessories

Domed washer diameter 100mm for M10 threaded luminaire - colours in 9 variations

Rondelle-bombé-Ø100-

€4.44

Domed washers with a diameter of 100mm. Choose the colour you need from the range.

Convex washer Ø 90mm colour for luminaire / M10 threaded lamp socket

Tools and assembly accessories

90mm diameter domed washer for M10 threaded luminaire - colours in 9 variations

Rondelle-bombé-Ø90-

€3.10

Domed washers with a diameter of 90mm. Choose the colour you need from the range.

Convex washer Ø 80mm colour for luminaire / M10 threaded lamp socket

Out-of-Stock

Tools and assembly accessories

80mm diameter domed washer for M10 threaded luminaire - colours in 9 variations

Rondelle-bombé-Ø80-

€2.50

Domed washers with a diameter of 80mm. Choose the colour you need from the range.

View

Round washer Ø 70mm colour for luminaire / M10 threaded lamp socket

Tools and assembly accessories

Cambered washer diameter 70mm for M10 threaded luminaire - colours in 9 variations

Rondelle-bombé-Ø70-

€2.00

Curved washers with a diameter of 70mm. Choose the colour you need from the range.

Convex washer Ø 60mm colour for luminaire / M10 threaded lamp socket

Tools and assembly accessories

Domed washer diameter 60mm for M10 threaded luminaire - colours in 9 variations

Rondelle-bombé-Ø60-

€1.60

Domed washers with a diameter of 60mm. Choose the colour you need from the range.

Convex washer Ø 50mm colour for luminaire / M10 threaded lamp socket

Tools and assembly accessories

Domed washer diameter 50mm for M10 threaded luminaire - colours in 9 variations

Rondelle-bombé-Ø50-

€1.00

Domed washers in 50mm diameter. Choose the colour you need from the range.

Domed washer Ø 40mm colour for luminaire / M10 threaded lamp socket

Tools and assembly accessories

40mm diameter domed washer for M10 threaded luminaire - colours in 9 variations

Rondelle-bombé-Ø40-

€0.80

Domed washers with a diameter of 40mm. Choose the colour you need from the range.

Domed washer Ø 30mm colour for luminaire / M10 threaded lamp socket

Tools and assembly accessories

30mm diameter domed washer for M10 threaded luminaire - colours in 9 variations

Rondelle-bombé-Ø30-

€0.60

Domed washers with a diameter of 30mm. Choose the colour you need from the range.

Product available with different options

Nut and washer

M10 domed chrome washer for lighting fittings - diameter from 30 to 160mm

DIY-080-chrome-bombée

€0.60

Domed chrome washer with hole for M10 electrical tube.

View

GU10 cap on M20.8mm zinc notched nut ring

Bulb caps

GU10 cap on M28 threaded zinc nut with 2mm pitch

Culot GU10-M28

€4.26

ThreadedGU10 base Ø M28mm for assembling luminaires and light fittings.

Sockets, multipliers, risers, adapter sockets

Adapter sleeve - E12 to E10

EF-E12-E10

€1.80

Easily convert your E12 socket into an E10 base in an instant with this adapter socket

E40 Classic Club solid machined lampholder for Edison-style lamp in a choice of 3 colours

Lampholder and base

E40 Classic Club solid machined lampholder for E40 base lamps - choice of 3 colours

Douille-E40-Classic-Club

€59.90

E40 Classic Club lampholder for large format bulbs in a resolutely neo-retro style, ideal for Edison-style incandescent or LED filament lamps,

Natural white fake chandelier candle 100mm D27

Lighting and lighting design

Dummy candle D27 for chandelier natural white colour length 100mm

bougie-blanc naturel-100-D27

€1.30

Natural white faux candle sleeve with imitation candle wax drippings.

Lighting and lighting design

Dummy candle D27 for chandelier white colour length 100mm

bougie-blanc-100mm-d27

€1.30

White faux candle case with imitation candle wax drippings.

Lighting and lighting design

Dummy candle D40 for chandelier white colour length 60mm

bougie-blanc-60-d40

€1.75

Faux candle sleeve D40, white with imitation candle wax drippings.

Fake chandelier candle ivory colour 100mm diameter d27

Lighting and lighting design

Fake candle D27 for chandelier ivory colour length 100mm

bougie-ivoire-100-d27

€1.30

D27 ivory faux candle sleeve with imitation candle wax drippings.

Lighting and lighting design

Dummy candle D24 for chandelier colour black length 100mm

bougie-noir-100-D24

€1.20

Natural black faux candle sleeve with imitation candle wax drippings.

Lighting and lighting design

Dummy candle D24 for chandelier natural white colour length 100mm

bougie-blanc naturel-100-D24

€1.20

D24 faux candle sleeve in natural white with imitation candle wax drippings.

LED filament bulb

2.5 watt dimmable E14 LED bulb with 4 LED filaments in 230 volts

STE1469-filament

€5.90

The E14 lamp format makes this bulb easy to fit into any light fitting. It operates on 230 volts alternating current.

G9 LED bulbs

2.5 watt dimmable LED G9 flame bulb with 4 LED filaments, 230 volts

STG965-G9-flamme-filament

€5.50

The G9 flame format makes this bulb easy to fit into any luminaire. It operates on 230 volts alternating current.

Spherical bulb Filament LED G125 amber black

Spherical LED bulbs

Twisted LED spherical globe filament bulb with black amber glass G125 - 5 watts E27 base

Globe-Filament-ambré-noir-G125

€38.20

A new LED bulb with an amber-black glass with a retro look, to delight lovers of beautiful decorative lighting.

Spherical LED bulbs

Twisted LED spherical globe filament bulb with G125 pearl glass - 5 watts E27 base

Globe-Filament-perlé-G125

€44.20

A new LED bulb with amber and pearl glass and a retro look, to delight lovers of beautiful decorative lighting.

G4 lamp holder on bulkhead with removable head

Sockets, multipliers, risers, adapter sockets

AC LED 230 volt 3 watt spotlight on M10 socket

Spot-lampe-AC-LED-3watts

€5.75

The AC LED spotlight makes it easy to install small light sources simply by going through a partition, or on shelves or kitchen units to illuminate a work surface.

G9 LED bulbs

G9 LED bulb with four LED filaments - dimmable to 2.5 watts at 230 volts

STG968-filament-4-G9

€5.90

The G9 lamp format makes this bulb easy to fit into any luminaire. It operates on 230 volts alternating current and is very similar in size to a standard halogen bulb.

Priape lampshade in natural brass or aged black brass

Glassware, stoneware, designer lighting

Priape lampshade in natural brass or antiqued black brass - creating a vintage luminaire

Abat-jour-laiton- Priape

€112.60

The Priape shade in brushed and varnished brass is perfect with an E27 brass lampholder for a retro effect.

Glassware, stoneware, designer lighting

Ouréa lampshade in brushed and varnished brass - creating a vintage light fitting

Abat-jour-laiton-Ouréa

€102.80

The Ouréa shade in brushed and varnished brass will look great with an E27 brass lampholder for a retro effect.

Ananké pendant luminaire for vintage T30 filament lamp

Out-of-Stock

Glassware, stoneware, designer lighting

Ananké lampshade in brushed and varnished brass - creating a vintage luminaire

Abat-jour-laiton-Ananké

€142.60

The Ananké shade in brushed and varnished brass is perfect with an E27 brass lampholder for a retro effect.

View

Paoli brass bell - diameter from 70mm to 130mm depending on version

Rosette, bell, claw and socket cover

Paoli brass bell - diameter from 70mm to 120mm depending on version

pavillon-laiton-paoli

€34.20

Paoli brass horn for antique luminaire diameter 120mm, 103mm or 70mm

Pendant luminaire for vintage T30 filament lamp

Glassware, stoneware, designer lighting

Oprah lampshade in brushed and varnished brass - creating a vintage light fitting

Abat-jour-laiton-Oprah

€158.60

The Oprah shade in brushed and varnished brass is perfect with an E27 brass lampholder for a retro effect.

Tube and threaded accessory

Brass telescopic tube for luminaire on M10 threaded tube - pole length depending on...

Tube-telescopique-laiton

€21.95

Telescopic tube in solid brass with M10 thread for assembling luminaires on hollow rods

Tools and assembly accessories

Threaded tube in galvanised steel M14 with 1mm pitch - length 100cm

DIY-085-M14x1-100cm

€19.50

Hollow threaded rod sold individually, standard M14, 1mm fine pitch, 1 metre long.

M14 threaded tube, 1.5mm pitch - 100cm long

Tools and assembly accessories

Threaded tube in galvanised steel M10 with 1.5mm pitch - length 100cm

DIY-085-M10x1.5-100cm

€12.50

Hollow threaded rod sold individually, diameter M10, standard pitch 1.5 mm, length 1 metre.

Tools and assembly accessories

Threaded tube in galvanised steel M8 1.25mm pitch - 100cm long

DIY-085-M8x1.25-100cm

€11.50

Hollow threaded rod sold individually, standard M8, 1.25 mm pitch, 1 metre long.

Otiorine brass bell - diameter 220mm M10 tube passage

Rosette, bell, claw and socket cover

Otiorine brass bell - diameter 127mm M10 tube passage

pavillon-laiton-373

€34.60

Otiorine brass horn for antique luminaire

Rosette, bell, claw and socket cover

Otiorine brass bell - diameter 220mm M10 tube passage

pavillon-laiton-372

€84.96

Large Otiorine brass bell for antique light fitting

Rosette, bell, claw and socket cover

Amaro brass bell - diameter 180mm M10 tube passage

pavillon-laiton-327

€43.55

Amaro brass horn for antique luminaire

Asterace brass bell - diameter 152mm M10 tube passage

Rosette, bell, claw and socket cover

Asteraceous brass bell - diameter 152mm M10 tube passage

pavillon-laiton-080

€38.60

Asterace brass horn for antique luminaire

Brass horn for luminaire diameter 132mm M10 tube passage

Rosette, bell, claw and socket cover

Brass bell with lacquered maple leaf - diameter 125mm M10 tube passage

pavillon-laiton-039

€32.20

Brass bell for antique luminaire

Biloba brass horn for 158mm diameter luminaire with M10 tube passage

Rosette, bell, claw and socket cover

Brass bell with biloba leaf - diameter 88mm M10 tube passage

pavillon-laiton-026

€15.50

Biloba brass bell for antique luminaire

Brass horn for 150mm diameter luminaire with M10 tube passage

Rosette, bell, claw and socket cover

Brass bell with lacquered maple leaf - diameter 150mm M10 tube passage

pavillon-laiton-004

€34.20

Brass bell for antique luminaire

Lighting and lighting design

Fake candle D27 material raw brass length 100mm

bougie-laiton-D27-100mm

€9.20

D27 faux candle scabbard in brass with imitation candle wax drippings.

Cable clamp, cable fastener, screws, interlock button

Wall-mounted brass bollard for electrical cables

DIY179-Borne-laiton-4S

€7.50

Brass bollard for decorative wall-mounted electrical cables

Flat brass washer, thickness 2mm, diameter 20 to 90mm

Screw, nut, threaded tube and plug, sleeve, washer, reducer

M10 brass washer for light fittings - diameter 20 to 100mm

DIY101-laiton

€0.72

Brass washer, thickness 1.5-2mm, used for the construction of brass chandeliers or light fittings.

Rounded brass washer, thickness 1mm, diameter 51-155mm

Screw, nut, threaded tube and plug, sleeve, washer, reducer

Rounded brass washer M10 for light fittings - diameter 51 to 155mm

DIY169-laiton-bombée

€5.12

Curved brass washer, thickness 1mm, used for the construction of brass chandeliers or light fittings.

Power cable and extension lead

Plug or socket 230 volts 2 P + Earth in rubber with straight outlet - choice of colours

prise-mâle-230V-2 P + T

€4.95

Socket for 230-volt high-power electrical equipment

Sockets, multipliers, risers, adapter sockets

E27 socket with wired output or E27 flyer socket

E27-to-cable-connect

€4.90

E27 lampholder with wired output.

Lampholder and base

G9 screw-in socket in steel with grey chrome finish

DIY-G9-acier chrome gris

€3.95

G9 lampholder in grey chromed steel with a resolutely modern style for incandescent or low-energy G9 base lamps,

E14 screw lampholder in steel with silver chrome finish

Lampholder and base

E14 Aspasia screw lampholder in steel with silver chrome finish

Aspasia-E14 acier chrome argent

€8.50

Chrome-plated silver lampholder in a resolutely modern style for use with E14 incandescent or low-energy bases,

E14 screw lampholder in steel with brass chrome finish

Lampholder and base

Aspasia E14 screw lampholder in steel with gold chrome finish

Aspasia-E14 acier chrome Or

€8.50

Chrome-plated gold lampholder in a resolutely modern style for E14 incandescent or low-energy lamps,

Socket with E27 base in smooth black plastic for bulb

Lampholder and base

Smooth black plastic E27 base lampholder for lamps fitted with a lampholder cap

Douille-lisse-E27-noir

€2.45

E27 lampholder in smooth black self-extinguishing plastic for incandescent, halogen or low-energy lamps,

Socket with E27 base in smooth plastic for bulb

Lampholder and base

Smooth white plastic E27 base lampholder for lamps fitted with a lampholder cap

Douille-lisse-E27-blanc

€2.45

E27 lampholder in smooth white self-extinguishing plastic for incandescent, halogen or low-energy lamps,

Tools and assembly accessories

Vintage bracket for luminaire / M10 threaded lampholder

Crochet-lum-M10

€1.75

Coloured M10 threaded hook for fixing bulb sockets, Choose the colour you need from the range.

Lighting and lighting design

Pine and brass pendant for pull switch mounted on ball chain or cord

Boule-pin-laiton

€3.50

Pine and brass teardrop pendant for chain switches

Lampholder and base

White plastic ring for E12 lampholder

bag-blanc-E12

€0.60

Self-extinguishing white plastic screw ring for E12 lampholder

Lampholder and base

Black plastic ring for E12 lamp socket

bag-noir-E12

€0.60

Self-extinguishing black plastic screw ring for E14 lampholder

Lampholder and base

Black plastic ring for E14 lampholder

bag-noir-E14

€0.60

Self-extinguishing black plastic screw ring for E14 lampholder

Lampholder and base

White plastic ring for E14 lampholder

bag-blanc-E14

€0.60

Self-extinguishing white plastic screw ring for E14 lampholder

Out-of-Stock

Lampholder and base

Black plastic ring for E27 lamp holder

bag-noir-E27

€0.65

Self-extinguishing black plastic screw ring for E27 lamp socket

View

Lampholder and base

White plastic ring for E27 lampholder

bag-blanc-E27

€0.65

Self-extinguishing white plastic screw ring for E27 lampholder

G4 LED bulbs

2 watt LED filament bulb with G4 base, 230 volts

STG471-Filament-230v

€3.95

The G4 lamp format makes this bulb easy to fit into any luminaire. It operates on 230 volts alternating current and is very similar in size to a standard halogen bulb.

G4 LED bulbs

2 watt LED filament bulb with G4 base - 12 volts

EFG446-Filament

€3.95

The G4 lamp format makes this bulb easy to fit into any luminaire. It operates on 12 volt DC and is very similar in size to a standard halogen bulb.

Tools and assembly accessories

38mm cage diameter hand die holder with two removable steel handles

Porte-filière-38mm

€21.75

Closed or slotted cage die holder in 38mm diameter with removable handles

Tools and assembly accessories

30mm cage diameter hand die holder with two removable steel handles

Porte-filière-30mm

€20.75

Closed or slotted cage die holder in 30mm diameter with removable handles

Tools and assembly accessories

Hand die holder with 20mm cage diameter and two removable steel handles

Porte-filière20mm

€18.75

Closed or slotted cage die holder in 20mm diameter with removable handles

Metric fine-pitch die, HSS, for electric threaded tube - size according to variation

Tools and assembly accessories

Metric fine-pitch die in HSS steel for electric threaded tube - size according to...

Filière-HSS

€12.75

Metric fine-pitch die, HSS, for electric threaded tube - size according to variant any size

Tube and threaded accessory

Reducer for electric threaded tube in galvanised steel size according to variant

Réduction

€0.54

Reducer for internally/externally threaded electrical pipe in galvanised steel - choice of dimensions

Glassware, stoneware, designer lighting

Reproduction of the famous Marconi marine SL039 projector on Dimma-color stands

Marconi-dimacolor

€468.60

A reproduction of a Marconi projector used on warships to transmit messages in Morse code.

Socket with E12 base in smooth plastic for bulb

Lampholder and base

Socket with E14 base in smooth white plastic for fake candle or lamp fitted with a...

Douille-lisse-E14

€2.25

E14 lampholder in self-extinguishing white plastic for incandescent, halogen or low-energy lamps,

Lampholder and base

Socket with E12 base in smooth white plastic for fake candle or lamp fitted with a...

Douille-lisse-E12

€1.96

E12 lampholder in self-extinguishing white plastic for incandescent, halogen or low-energy lamps,

LED filament bulb

1 watt LED filament candle flame bulb with E12 base

Ampoule-e12-bougie

€4.90

A tiny LED bulb that imitates the flame of a candle , to the delight of lovers of beautiful traditional lighting!

Dummy plug support D24 E12 socket for M10 threaded tube height depending on declination

Lighting and lighting design

Dummy plug support D20 E12 socket for M10 threaded tube height depending on version

Support fausse bougie e12

€1.30

D20 dummy candle holder on E12 socket for M10 threaded tube, perfect for assembling candle lighting.

Sockets, multipliers, risers, adapter sockets

G9 porcelain lampholder on M10 support with threaded ring

Douille-G9-M10-bague

€4.26

This G9 lamp holder makes it easy to install small G9 light sources in luminaires.

Ring, hook, ball joint and spring

Insillot brass ball joint, one joint for M10 threaded tube with 1mm pitch

Rotule-m10-Insillot

€16.90

M10 threaded solid brass ball joint for assembling hollow polishing rods

Brass sleeve Herald brass ball joint, one joint for M10 threaded tube with 1mm pitch

Ring, hook, ball joint and spring

Herald brass ball joint, a joint for M10 threaded tube with 1mm pitch

DIY231028-Rotule-m10-Herald

€11.20

M10 threaded solid brass ball joint for assembling hollow polishing rods

6-turn brass tapered ring bushing with M10 thread

Ring, hook, ball joint and spring

Brass ball joint, one joint for M10 threaded tube with 1mm pitch

DIY091-Rotule-231015

€6.95

M10 threaded solid brass ball joint for assembling hollow polishing rods

Jieldé lamp-style brass industrial loft light for E27 lamp

Brass and bronze creation for luminaire

Reflector for industrial loft luminaire in brass in the Jieldé lamp style for E27 lamp

réflecteur-type-Jieldé-laiton

€68.80

Made entirely from raw brass, this reflector is a small-format version of the famous Jieldé industrial lamp.

Lampholder and base

MR16 or G4 porcelain socket with M10 support

Douille-mr16-M10

€3.20

MR16 porcelain socket with support for M10 hollow threaded rods

Lampholder and base

E14 porcelain lampholder with threaded ring and M10 support

Douille-bague-E14-M10

€4.20

E14 porcelain socket with support for M10 hollow threaded rods

Lampholder and base

E27 porcelain socket with threaded ring and M10 support

Douille-bague-E27-M10

€4.50

E27 porcelain socket with support for M10 hollow threaded rods

Brass washer for 30mm diameter M10 lighting tube

Brass and bronze creation for luminaire

Brass washer for M10 screw external diameter 30mm thickness 2mm

Rondelle-laiton-M10X30

€1.90

Brass washer, thickness 2mm, used for the construction of chandeliers or luminaires

Tube and threaded accessory

6-turn brass tapered corrugated bushing with M10 thread in 1mm increments

DIY093203008-M10-6-spire

€3.00

M10 threaded solid brass sleeve for assembling hollow polishing rods

3-turn brass tapered ring bushing M10 threaded

Tube and threaded accessory

3-turn brass tapered corrugated bushing with M10 thread in 1mm increments

DIY203005-M10-3-spire

€3.00

M10 threaded solid brass sleeve for assembling hollow polishing rods

Tube and threaded accessory

Smooth brass sleeve for M10 threaded pipes, length 36mm

DIY105219022

€9.80

A decorative brass element for assembling the luminaires, allowing cables to pass through on M10 hollow rods.

ST64 format bulb with linear optical diffuser

Spherical LED bulbs

LED bulb in ST64 format with linear optical diffuser, 4 watts, E27 base

ST64 optique-line

€24.50

An LED bulb with three glass finishes: amber, transparent or smoke black for a neo-retro look that will delight lovers of beautiful light.

Lampholder and base

E27 Classic Théme XXL lampholder machined from solid for loft style Edison 3 colours to...

Douille-E27-Classic-Théme-XXL

€58.80

E27 Classic Theme lampholder for a resolutely neo-retro style, ideal for Edison-style incandescent or LED filament lamps.

E27 Classic Club brass lampholder for Edison-style lamp

Lampholder and base

E27 Classic Club solid machined socket for Edison-style lamp in a choice of 3 colours

Douille-E27-Classic-Club

€32.90

Classic Club E27 brass lampholder for a resolutely neo-retro style, ideal for Edison-style incandescent or LED filament lamps,

Lampholder and base

Lynch E27 lampholder in machined solid brass for Edison-style lamp with long thread

DIY233031-Douille-E27-lynch-laiton

€18.90

E27 socket in vintage brass, for a resolutely neo-retro style, ideal for Edison-style incandescent or LED filament lamps,

Rosette, bell, claw and socket cover

Brass lampholder cover with straight outer rim for E27 lamp

Cache-douille-laiton-E27

€5.20

Brass cover for E27 lampholder

Glassware, stoneware, designer lighting

GlobeOne coloured borosilicate glassware for a designer crystal pendant light

GlobeOne

€44.20

GlobeOne luminaire in borosilicate suspended by a coaxial cable, available in eight different glass colours.

Tube and threaded accessory

Zamac serrated nut for M20.8mm threaded ring with 2mm pitch

écrou-bague-M20,8

€0.95

Zamac serrated nut for assembling luminaires and lighting fixtures mounted on G9 or G4 lampholders.

Sockets, multipliers, risers, adapter sockets

G9 lampholder mounted on M20.8 ring with 2 mm pitch and 1 metre coaxial cable

Douille-lampe-G9-cable-coaxial

€6.90

This G9 lamp holder makes it easy to install small G9 light sources in luminaires.

Sockets, multipliers, risers, adapter sockets

G4 lampholder mounted on M20.8 ring with 2 mm pitch and 1 metre coaxial cable

Douille-lampe-G4-cable-coaxial

€6.90

This G4 lamp holder makes it easy to install small G4 light sources in luminaires.

Smooth female cable clamp in chromed steel

Cable clamp, cable fastener, screws, interlock button

White chromium-plated steel cable clamp cable passage diameter depending on version

Serre-câble-chromé

€1.45

Greenhouses with lamp cables and chandelier pavilions

Lighting and lighting design

E27 Taurino vintage single-ring bronze lampholder

E27 Taurino bronze bague simple

€20.90

E27 lampholder with an aged bronze look for a resolutely neo-retro style, ideal for Edison-style incandescent or LED filament lamps,

E27 Caravaggio bronze lampholder long threaded ring Ø 42

Lighting and lighting design

E27 Coronado lampholder in aged copper with long threaded ring, diameter 42mm

Douille-E27-Coronado

€12.90

E27 lampholder with threaded ring, an aged copper look for a resolutely neo-retro style, ideal for Edison-style incandescent or LED filament lamps,

Lighting and lighting design

E27 Caravaggio bronze lampholder with double long threaded rings, diameter 42mm

E27 Caravaggio-bague long

€15.90

E27 lampholder with long threaded ring, an aged bronze look for a resolutely neo-retro style, ideal for Edison-style incandescent or LED filament lamps,

E27 Paollo vintage bronze single ring lampholder

Out-of-Stock

Lighting and lighting design

E27 Paollo vintage bronze single ring lampholder

E27 Paollo bronze bague simple

€14.50

E27 lampholder with an aged bronze look for a resolutely neo-retro style, ideal for Edison-style incandescent or LED filament lamps,

View

E27 chrome lampholder for Edison style lamp

Lampholder and base

E27 chrome neo-retro lampholder for short threaded ring lamp Ø 40

E27-Chrome-simple

€12.90

Chrome-plated E27 lampholder in a resolutely neo-retro style, ideal for Edison-style incandescent or LED filament lamps,

Lighting and lighting design

Glass and coloured Nétolite pendant for pull switch mounted on ball chain or cord

Boule-Netolite

€6.90

Netolite pendant in glass and small coloured dots, a pull ball for chain switches

Lighting and lighting design

Vireligne pendant in glass and blue edging for pull switch mounted on ball chain or cord

Boule-vireligne-bleu

€6.90

Glass and blue edged chain switch pendant

Tube and threaded accessory

Low zinc-plated nut for M10 tube, 1mm pitch, 4mm thick

écrou-zinc-M10-4mm

€0.16

Low zinc-plated steel nuts are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

K9 crystal globe luminaire with M10 thread

Glassware, stoneware, designer lighting

Ice crystal K9 glass luminaire with M10 threaded chrome-plated steel base

Ice-cristal-M10

€8.60

The Globe Ice luminaire in high-transmittance K9 glass, made from solid glass, is ideal for diffusing light in a non-aggressive way.

M6 threaded chrome-plated steel tube with double flanged collar

Tools and assembly accessories

M6 threaded chrome-plated steel tube with two flanged collars - choice of length...

Tube-chromé-M6-double

€1.20

Chrome-plated M6 threaded tube for mounting old luminaires, length of tubes according to declination.

M6 threaded copper-plated steel tube with double shoulder for luminaire - length according to variant

Tools and assembly accessories

M6 threaded copper-plated steel tube with double flanged collar - length to suit range

Tube-cuivré-M6-double

€1.20

M6 threaded copper tube for mounting old luminaires, tube length according to declination.

Tools and assembly accessories

M10 threaded chrome-plated tube for G4 lamp, length to be chosen according to version

Tube-chromé-M10

€1.20

M10 threaded chrome tube for mounting G4 lamps, tube length depending on declination.

Elissage bronze and blue porcelain pendant for pull switch

Out-of-Stock

Lighting and lighting design

Elissage pendant in bronze and blue porcelain for pull switch mounted on ball chain or...

Boule-Elissage-bleu

€7.90

Bronze and black porcelain pendant for chain switches

View

Elissage bronze and white porcelain pendant for pull switch

Lighting and lighting design

Elissage pendant in bronze and white porcelain for pull switch mounted on ball chain or...

Boule-Elissage-blanc

€7.90

Bronze and black porcelain pendant for chain switches

Elissage bronze and black porcelain pendant for pull switch

Lighting and lighting design

Elissage pendant in bronze and black porcelain for pull switch mounted on ball chain or...

Boule-Elissage-noir

€7.90

Bronze and black porcelain pendant for chain switches

Lighting and lighting design

Varnished pinewood pendant for pull switch mounted on ball chain or cord

Boule-pin

€0.25

Pine teardrop pendant for chain switches

E14 porcelain lampholder with M10 support

Lampholder and base

E14 porcelain lampholder on M10 hollow threaded rods

Douille-E14-M10

€3.20

E14 porcelain socket with support for M10 hollow threaded rods

E27 porcelain lampholder with M10 support

Lampholder and base

E27 porcelain lampholder on M10 hollow threaded rods

Douille-E27-M10

€3.20

E27 porcelain socket with support for M10 hollow threaded rods

Lighting and lighting design

6mm diameter silver-coloured metal ball chain - sold by the linear metre

chaine-metre-argent-6mm

€2.80

A 6 mm diameter silver-coloured metal ball chain for hanging or securing small objects.

Lighting and lighting design

Bronze-coloured metal ball chain, diameter 6mm - sold by the linear metre

chaine-metre-bronze-6mm

€2.80

Bronze-coloured metal ball chain, 6 mm in diameter, for hanging or securing small objects.

6mm diameter black metal ball chain - sold by the linear metre

Lighting and lighting design

Black metal ball chain 6mm diameter - sold by the linear metre

chaine-metre-noir-6mm

€2.80

6 mm diameter black metal ball chain for hanging or securing small objects.

Lighting and lighting design

6mm diameter gold-plated ball chain - sold by the linear metre

chaine-metre-doré-6mm

€2.80

A 6 mm diameter gold-plated ball chain for hanging or securing small objects.

Lighting and lighting design

4.5mm diameter silver-coloured metal ball chain - sold by the linear metre

chaine-metre-argent-4.5mm

€2.30

4.5 mm diameter silver-coloured metal ball chain for hanging or securing small objects.

Lighting and lighting design

Bronze-coloured metal ball chain diameter 4.5mm - sold by the linear metre

chaine-metre-bronze-4.5mm

€2.30

Bronze-coloured metal ball chain with a diameter of 4.5 millimetres for hanging or securing small objects.

4.5mm diameter black metal ball chain - sold by the linear metre

Lighting and lighting design

Black metal ball chain diameter 4.5mm - sold by the linear metre

chaine-metre-noir-4.5mm

€2.80

Black metal ball chain with a diameter of 4.5 millimetres for hanging or securing small objects.

Lighting and lighting design

4.5mm diameter gold-plated ball chain - sold by the linear metre

chaine-metre-doré-4.5mm

€2.30

4.5 mm diameter gold-plated ball chain for hanging or securing small objects.

Lighting and lighting design

3.2mm diameter silver-coloured metal ball chain - sold by the linear metre

chaine-metre-argent-3.2mm

€1.80

3.2 mm diameter silver-coloured metal ball chain for hanging or securing small objects.

Lighting and lighting design

Bronze-coloured metal ball chain, diameter 3.2mm - sold by the linear metre

chaine-metre-bronze-3.2mm

€1.80

3.2 mm diameter ball chain in bronze-coloured metal for hanging or securing small objects.

Lighting and lighting design

Black metal ball chain diameter 3.2mm - sold by the linear metre

chaine-metre-noir-3.2mm

€1.80

Black metal ball chain, 3.2 mm in diameter, for hanging or securing small objects.

3.2mm diameter gold-plated ball chain - sold by the linear metre

Lighting and lighting design

3.2mm gold-plated ball chain - sold by the linear metre

chaine-metre-doré-3.2mm

€1.80

3.2 mm diameter gold-plated ball chain for hanging or securing small objects.

Dummy candle

Fake metal candle D24 for chandelier length 100mm

Fausse bougie-acier-100mm

€3.50

Faux steel candle case, with imitation candle wax drippings. Choose the colour you need from our range.

Tools and assembly accessories

Fake metal candle D24 for chandelier length 90mm

Fausse bougie-acier-90mm

€3.20

Faux steel candle case, with imitation candle wax drippings. Choose the colour you need from our range.

Horizontal luminaire for vintage T30 filament lamp

Glassware, stoneware, designer lighting

Horizontal luminaire for T30 vintage filament lamp

luminaire-T30-horizontale

€82.60

Suspended horizontally by two cables, it requires an E27 T30 bulb to light up your home.

Tube and threaded accessory

M10 threaded brass tube with flanged collar - 6 lengths in various versions

Tube-laiton-collet battu-M10

€4.20

Brass threaded tube for fixing bulb sockets, six tube lengths available

M10 zinc-plated sleeve with 1mm pitch hex base - 25mm long

Tube and threaded accessory

M10 zinc-plated sleeve with 1mm pitch hex base - 15mm long

DIY-manchon-zingué-M10-15mm

€0.35

Hollow sleeve sold individually, standard M10, 1mm fine pitch, 15mm long.

Tools and assembly accessories

M10 zinc-plated sleeve with 1mm pitch hex base - 25mm long

DIY-manchon-zingué-M10-25mm

€0.40

Hollow sleeve sold individually, standard M10, 1mm fine pitch, 25mm long.

Notched brass-plated washer nut for M10 threaded tube

Out-of-Stock

Tube and threaded accessory

M10 notched nut - brass-coloured zinc-coated steel washer and nut

Rondelle-cranté-ecrou-M10-laiton

€0.35

Brass-style zinc-coated steel washers are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

View

Notched zinc-plated hexagonal washer nut for M10 threaded tube

Nut and washer

Zinc-plated steel lock washer for M10 threaded tube

Rondelle ecrou-zingué-M10

€0.35

Zinc-plated steel notched washers are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

Glassware, stoneware, designer lighting

Pendant luminaire for T30 vintage filament lamp

luminaire-T30-suspendu

€82.60

This light hangs vertically from a cable and requires an E27 T30 bulb to light up your home.

Spherical bulb Filament LEDs Spectra color 515 Lumens

Spherical LED bulbs

T30 Twisted LED filament tube lamp, diameter 30mm, 3 watts, length 125mm, E27 base

T30-Filament-twist-3w-125mm

€17.90

Filament bulbs are back, and today we're offering you a new 185mm long Edison-style T30 tube lamp fitted with a 5-watt Twisted LED filament.

Out-of-Stock

Spherical LED bulbs

Twisted T30 LED filament lamp, diameter 30mm, 3 watts, length 185mm, E27 base

T30-Filament-twist-5w-185mm

€19.50

Filament bulbs are back, and today we're offering you a new 185mm long Edison-style T30 tube lamp fitted with a 3 watt Twisted LED filament.

View

Out-of-Stock

Spherical LED bulbs

T30 Twisted LED filament tube lamp, diameter 30mm, 5 watts, length 300mm, E27 base

T30-Filament-twist-5w-300mm

€24.50

Filament bulbs are back, and today we're offering you a new 300mm-long Edison-style T30 tube lamp fitted with a 5-watt Twisted LED filament.

View

Tube and threaded accessory

Brass hexagon nut for M8 threaded tube, 1mm pitch

Ecrou-laiton-M8

€0.39

The low brass nuts are perfect for assembling light fittings and chandeliers mounted on M8 hollow rods.

Tube and threaded accessory

Brass hexagon nut for M12 threaded tube, 1mm pitch

Ecrou-laiton-M12

€0.60

The low brass nuts are perfect for assembling light fittings and chandeliers mounted on M12 hollow rods.

Tube and threaded accessory

Brass hexagon nut for M6 threaded tube, 1mm pitch

Ecrou-laiton-M6

€0.25

The low brass nuts are perfect for assembling light fittings and chandeliers mounted on M6 hollow rods.

Tube and threaded accessory

20x20mm square brass sleeve with triple outlet M10 thread

DIY-232031-carré-triple

€5.30

This square brass sleeve has a triple thread for passing cables and is perfect for assembling M10 hollow rods.

Square brass sleeve with 180° M10 thread

Tube and threaded accessory

Square brass sleeve with through thread M10

DIY232005-Manchon-laiton-carré-1

€5.00

This square brass sleeve with double thread for 180° cable entry is perfect for assembling M10 hollow rods.

Tube and threaded accessory

20x20mm square brass sleeve with double 90° thread M10

Manchon-220015-laiton-carré-90°

€5.12

This square brass sleeve with double thread for 90° cable entry is perfect for assembling M10 hollow rods.

brass fixing ring for luminaire or lampholder

Ring, hook, ball joint and spring

Suspension ring brass machined from solid M10 thread with raw corrugated finish

DIY089-218002

€5.40

M10 brass threaded ring for fixing lamp sockets or luminaires

Tube and threaded accessory

Brass hexagon nut for M10 threaded tube, 1mm pitch

Ecrou-laiton-M10-e3.5mm

€0.42

Low brass nuts are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

Tube and threaded accessory

Threaded pipe in zinc-plated steel 3/4 inch Gaz 14G - length 100cm

DIY-tube-3/4-pouce-100cm

€48.20

Threaded tube in galvanised steel, 3/4" Gaz pitch, 1 metre long.

M20 threaded tube with 1.5mm pitch - 100cm long

Tube and threaded accessory

Threaded tube in galvanised steel M20 1.5mm pitch - 100cm long

DIY-085-M20x1.5-100cm

€39.90

Hollow threaded rod sold individually in M20 standard with 1.5mm fine pitch, length 1 metre.

M18 threaded tube with 1.5mm pitch - 100cm long

Tube and threaded accessory

Threaded tube in galvanised steel M18 1.5mm pitch - 100cm long

DIY-085-M18x1.5-100cm

€33.37

Hollow threaded rod sold individually, standard M18, 1.5 mm fine pitch, 1 metre long.

Out-of-Stock

Tube and threaded accessory

Threaded tube in galvanised steel M16 1.5mm pitch - 100cm long

DIY-085-M16x1.5-100cm

€26.50

Hollow threaded rod sold individually, standard M16, 1.5 mm fine pitch, 1 metre long.

View

Tube and threaded accessory

Threaded tube in galvanised steel M14 1.5mm pitch - 100cm long

DIY-085-M14x1.5-100cm

€19.50

Hollow threaded rod sold individually in M14 standard with 1.5mm fine pitch, length 1 metre.

Tube and threaded accessory

Threaded tube in galvanised steel M12 with 1mm pitch - length 100cm

DIY-085-M12x1-100cm

€14.90

Hollow threaded rod sold individually in M12 standard with 1mm fine pitch, 1 metre long.

M8 threaded tube with 1mm pitch - 100cm long

Tube and threaded accessory

Threaded tube in galvanised steel M8 1mm pitch - 100cm long

DIY-085-M8x1-100cm

€10.75

Hollow threaded rod sold individually, standard M8 with 1mm fine pitch, 1 metre long.

M6 threaded tube with 1mm pitch - 100cm long

Tube and threaded accessory

Threaded tube in galvanised steel M6 1mm pitch - 100cm long

DIY-085-M6x1-100cm

€9.20

Hollow threaded rod sold individually, standard M6, 1mm fine pitch, 1 metre long.

Lamp cord with switch

230-volt power cord with foot switch + transparent plug

Cordon-pied-transparent

€6.95

Cable for luminaire power supply with push-button switch

230-volt power cord with foot switch + black plug

Lamp cord with switch

230 volt power cord with foot switch + brown plug

Cordon-pied-marron

€6.95

Cable for luminaire power supply with push-button switch

Lamp cord with switch

230-volt power cord with foot switch + black plug

Cordon-pied-noir

€6.95

Cable for luminaire power supply with push-button switch

Spherical bulb Filament LED G125 lower half chrome

Spherical LED bulbs

G125 half chrome gold superior LED globe filament bulb - 8 watts E27 base

Globe-Fila-chrome-or-sup

€38.20

Filament bulbs are back, and today we're offering you a new range of Edison-style LED bulbs with a retro look. The LED filament bulb with gold-coloured half-chrome reflector allows you to direct the light flow to avoid being dazzled.

Spherical LED bulbs

G125 lower half chrome LED globe filament bulb - 8 watts E27 base

Globe-Fila-chrome-argen-inf

€38.20

Filament bulbs are back, and today we're offering you a new range of Edison-style LED bulbs with a retro look. The LED filament bulb with half-chrome reflector allows you to direct the luminous flux to avoid being dazzled.

Spherical LED bulbs

G125 superior half chrome LED globe filament bulb - 8 watts E27 base

Globe-Fila-chrome-argen-sup

€38.20

Spherical LED bulbs

LED bulb in ST64 Twisted filament colour - 6 watts E27 base

ST64 Couleur 6w

€32.50

A highly decorative coloured LED bulb with its twisted LED filament in an elongated glass globe, identical to our old filament bulbs designed by Thomas Edison.

Spherical bulb Filament LED G125 Marbled GOLD

Spherical LED bulbs

G125 Marbled Gold LED Globe Bulb - 6 watts E27 base

Globe-Filament-Marbré-gold-G125

€38.20

Filament bulbs are back, and now we're bringing you a new range of Edison-style LED bulbs with a retro look, the marbled Gold bulb, to delight lovers of beautiful decorative lighting.

Spherical four-filament LED bulb with E27 base in amber glass

Spherical LED bulbs

6 watt LED spherical bulb Ø A60 with E27 base - six amber glass LED filaments

Fil-A60-6w-E27-ambré-BC

€8.60

Filament bulbs are back, and now we're bringing you a new range of Edison-style LED bulbs with a retro look, to delight lovers of beautiful traditional lights!

Spherical LED bulbs

8 watt LED spherical bulb Ø A60 with E27 base - eight LED filaments - clear glass

Filament -A60 8w-E27

€9.50

Filament bulbs are back, and now we're bringing you a new range of Edison-style LED bulbs with a retro look, to delight lovers of beautiful traditional lights!

Spherical bulb with four LED filaments, E27 base, 4 watt wattage

Spherical LED bulbs

6 watt LED spherical bulb Ø A60 with E27 base - six LED filaments - clear glass

Filament -A60 6w-E27

€7.50

Filament bulbs are back, and now we're bringing you a new range of Edison-style LED bulbs with a retro look, to delight lovers of beautiful traditional lights!

Spherical LED bulbs

4 watt Ø G45 E27 spherical LED bulb - four LED filaments - clear glass

Filament -G45 4w-E27

€5.50

Filament bulbs are back, and now we're bringing you a new range of Edison-style LED bulbs with a retro look, to delight lovers of beautiful traditional lights!

Spherical bulb Filament LED 4 watts E14 base

Spherical LED bulbs

4 watt Ø G45 E14 spherical LED bulb - four LED filaments - clear glass

Filament -G45 4w-E14

€5.50

Filament bulbs are back, and now we're bringing you a new range of Edison-style LED bulbs with a retro look, to delight lovers of beautiful traditional lights!

Gold-coloured, zinc-plated hexagonal nut for M10 threaded tube

Tube and threaded accessory

Gold-coloured electro-galvanised steel hexagonal nut for M10 threaded tube

Ecrou-zingué-M10-OR

€0.25

Gold-coloured, zinc-plated steel nuts are perfect for assembling luminaires and lighting fixtures mounted on M10 hollow rods.

Ring, hook, ball joint and spring

Bulb holder spring ring for MR11 spotlight

Anneau-maintient-front-MR11

€0.50

Spring for holding bulbs in MR11 spotlights from the front

Ring, hook, ball joint and spring

Bulb holder spring ring for GU10 or MR16 spotlights

Anneau-maintient-front-GU10MR16

€0.50

Spring for holding bulbs in GU10 or MR16 spotlights

Ring, hook, ball joint and spring

Bulb holder rear spring ring for GU10 or MR16 spotlights

Anneau-ressort-back-gu10mr16

€0.50

Spring for holding bulbs in GU10 or MR16 spotlights

Desk lamp with clamp and inter - Choice of five colours

Glassware, stoneware, designer lighting

Silicone bonnet and coloured socket cover - choice of twelve colours

Pavillon-douille-silicone

€9.60

This ceiling light with silicone lampholder will add a touch of elegance to your home

Glassware, stoneware, designer lighting

Desk lamp with clamp and inter - Choice of five colours

Lampe de bureau

€18.50

5-colour desk lamp with clip-on swivel hose for quick and easy attachment

1mm thick chrome-GOLD washer 30-200mm diameter

Nut and washer

M10 chrome-plated washer, thickness 1mm, for lighting fixtures - diameter 30-200mm

DIY-080-OR

€0.86

Gold-coloured chrome washer, 1mm thick, used in the construction of chandeliers or chrome-plated metal luminaires.

M10 chrome washer, thickness 1mm, diameter 30-200mm

Nut and washer

M10 chrome-plated washer, thickness 1mm for light fittings - diameter 30-200mm

DIY-080

€0.79

M10 chromed washer, thickness 1mm, used for the construction of chandeliers or luminaires in chromed metal.

Plastic socket with double clamping rings for E14 base bulb

Lampholder and base

White plastic socket with double clamping rings for E12 base bulb

EFDSC001-P-E12 double bag-blanc

€2.20

E12 lampholder in self-extinguishing white plastic with double screw ring for incandescent, halogen or low-energy lamps,

Black plastic socket with double clamping rings for E14 base bulb

Lampholder and base

Black plastic socket with double clamping rings for E12 base bulb

EFDSC001-P-E12 double bag-noir

€2.20

Self-extinguishing black plastic E12 base lampholder with double screw ring for incandescent, halogen or low-energy lamps,

Tools and assembly accessories

Nylon adapter ring for E27 or B22 to E14 lampshade

Anneau E27-E14

€0.65

These small nylon rings make it easy to fit a large-diameter shade to an E14 lampholder.

Lampholder and base

Black plastic socket with double clamping rings for E14 base bulb

EFDSC001-P-E14 double bag-noir

€1.96

E14 lampholder in self-extinguishing black plastic with double screw ring for incandescent, halogen or low-energy lamps,

Lampholder and base

Black plastic socket with double clamping rings for E27 base bulb

EFDSC002-P-E27 double bag-noir

€2.96

E27 lampholder in self-extinguishing black plastic with double screw ring for incandescent, halogen or low-energy lamps,

Spherical LED bulbs

Twisted G125 LED filament globe bulb - 6 watts E27 base

Globe Filament twisted G125 6w

€38.20

Filament bulbs are back, and now we're bringing you a new range of Edison-style LED bulbs with a retro look, to delight lovers of beautiful traditional lights!

Product available with different options

LED filament bulb

Twin filament gale-flame bulb-LED - 2 watts E14 base

Flamme Filament 2w BC

€4.90

An LED bulb with an opaque glass globe, identical to our old carbon filament bulbs designed by Thomas Edison, with a retro look to delight lovers of beautiful traditional lights!

View

Spherical LED bulbs

ST64 four filament LED bulb - 6 watts E27 base

ST64 Filament 6w BC

€11.50

An LED bulb with an amber glass globe, identical to our old carbon filament bulbs designed by Thomas Edison, with a retro look to delight lovers of beautiful traditional lights!

Spherical LED bulbs

ST64 four filament LED bulb - 4 watts E27 base

ST64 Filament 4w BC

€9.50

An LED bulb with an amber glass globe, identical to our old carbon filament bulbs designed by Thomas Edison, with a retro look to delight lovers of beautiful traditional lights!

Spherical LED bulbs

Twisted G95 LED filament globe bulb - 4 watts E27 base

Globe Filament twisted G95 4w

€32.50

Filament bulbs are back, and now we're bringing you a new range of Edison-style LED bulbs with a retro look, to delight lovers of beautiful traditional lights!

Cable clamp, cable fastener, screws, interlock button

Smooth cable clamp, choice of colours, cable passage diameter 6.8mm

Serre-câble-lisse-6.8mm

€2.00

Greenhouses with lamp cables and chandelier pavilions

Lighting and lighting design

False candle holder D24 E14 socket for M10 threaded tube height depending on declination

Support fausse bougie e14

€1.20

D24 dummy candle holder on E14 socket for M10 threaded tube, perfect for assembling candle lighting.

Cable clamp, cable fastener, screws, interlock button

Electrical cable clamp in oxide bronze plastic for lamp socket or ceiling rose with M10...

serre cable bronze oxyde

€1.00

Oxide bronze-coloured plastic electrical cable clamp for light bulb socket or ceiling rose with M10 thread.

White cord with switch for 230-volt power supply

Lamp cord with switch

230 volt power cord with foot switch + white plug

Cordon-pied-blanc

€6.95

Cable for luminaire power supply with push-button switch

Lighting and lighting design

Dummy candle D24 for chandelier white colour length 100mm

bougie-blanc-100-D24

€1.20

Faux candle sleeve D24, white with imitation candle wax drippings.

Tools and assembly accessories

Fake metal candle D24 for chandelier length 80mm

Fausse bougie-acier

€2.80

Faux steel candle case, with imitation candle wax drippings. Choose the colour you need from our range.

Lighting and lighting design

Dummy candle D24 for chandelier ivory colour length 100mm

bougie-ivoire-100-D24

€1.20

Ivory D24 fake candle case with imitation candle wax drippings.

Hexagonal bichromated steel sleeve with M10 thread

Tube and threaded accessory

Hexagonal socket in dichromated steel, tapped for M10 electrical tube - Height 25mm

Manchon-M10-bichr-25mm

€1.00

This hexagonal bichromated steel sleeve is perfect for assembling M10 hollow rods.

TE triple female coloured steel thread M10

Tube and threaded accessory

Steel triple female threaded tee for installation on M10 threaded tubes

T-fileté-M10

€1.10

Female triple tees in stainless steel are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

Sockets, multipliers, risers, adapter sockets

G9 caps with threaded support for M10 tube

culot-G9-M10

€2.20

This base for a G9 bulb is designed to be connected to a luminaire fitted with an M10 tube.

Sockets, multipliers, risers, adapter sockets

E40 lampholder for industrial lamp with suspension ring

Douille-E40- anneau de suspensio

€11.90

Lampholder with zamac suspension ring for industrial lamp with E40 lampholder

G4 LED bulbs

2-watt G4 LED filament bulb

EFG446-Filament

€3.95

A 2-watt filament bulb, its small size makes it easy to install in kitchens, bathrooms, boats, motor homes, etc.

Cable clamp, cable fastener, screws, interlock button

Cable gland for M10 tube, white

presse étoupe tube blanc

€1.00

White plastic electrical cable clamp for tubes with M10 threads.

Cable clamp, cable fastener, screws, interlock button

Cable gland for M10 tube, black

presse étoupe tube noir

€1.00

Black plastic electrical cable clamp for tubes with M10 threads.

Cable clamp, cable fastener, screws, interlock button

Cable gland for M10 tube, transparent

presse étoupe tube trans

€1.00

Transparent plastic electrical cable clamp for tubes with M10 threads.

M10 coloured threaded tube, 10 cm long an accessory for bulb sockets

Tube and threaded accessory

M10 coloured threaded tube, 10 cm long, 1 mm thread for chandeliers

TC-M10-10cm

€4.50

Coloured threaded rod for fixing bulb sockets, tube length 10 centimetres. Choose the colour you need from the range.

Lampholder and base

E27 lampholder in high-gloss enamelled porcelain in olive green

E27 porcelaine vert olive

€9.20

E27 lampholder in shiny enamelled porcelain in olive green for a resolutely neo-retro style.

Lampholder and base

E27 lampholder in high-gloss porcelain enamel in pearlescent black

E27 porcelaine noir nacré

€9.20

E27 lampholder in gloss enamelled porcelain in a pearly black colour for a resolutely neo-retro look.

Lampholder and base

E27 lampholder in gloss enamelled porcelain in mother-of-pearl white

E27 porcelaine blanc nacre

€9.20

E27 lampholder in gloss enamelled porcelain in mother-of-pearl white for a resolutely neo-retro style.

Lampholder and base

E27 lampholder in chestnut brown gloss enamelled porcelain

E27 porcelaine marron châtaigne

€9.20

E27 lampholder in chestnut brown gloss enamelled porcelain for a resolutely neo-retro style.

Lampholder and base

E27 lampholder in gloss enamelled porcelain in Indian yellow

E27 porcelaine jaune indien

€9.20

E27 lampholder in gloss enamelled porcelain in Indian yellow for a resolutely neo-retro style.

Lampholder and base

E27 lampholder in gloss enamelled porcelain in pink

E27 porcelaine rosange

€9.20

E27 lampholder in shiny enamelled porcelain in pink for a resolutely neo-retro style,

Lampholder and base

E27 lampholder in high-gloss enamelled porcelain in French blue

E27 porcelaine bleu FR

€9.20

E27 lampholder in shiny enamelled porcelain in French blue for a resolutely neo-retro style,

Lighting and lighting design

E27 vintage design bronze lampholder with long threaded ring Ø 42

E27 Edison bronze bague long

€19.90

E27 lampholder with long threaded ring, an aged bronze look for a resolutely neo-retro style, ideal for Edison-style incandescent or LED filament lamps,

Lighting and lighting design

E27 vintage design bronze lampholder with short threaded ring Ø 42

E27 Edison bronze bague court

€19.90

E27 lampholder with short threaded ring, an aged bronze look for a resolutely neo-retro style, ideal for Edison-style incandescent or LED filament lamps,

Lampholder and base

E27 Elegance vintage bronze lampholder for Edison style lamp

E27 elegance bronze simple

€16.50

Vintage E27 lampholder with an aged bronze look for a resolutely neo-retro style, ideal for Edison-style incandescent or LED filament lamps,

E27 screw lampholder in steel with black chrome finish

Lampholder and base

E27 Neliam screw lampholder in steel with black chrome finish

DIY-067 E27 acier chrome noir

€9.90

Black chrome lampholder in a resolutely modern style for use with E27 incandescent or low-energy bases,

E27 screw lampholder in steel with copper chrome finish

Lampholder and base

E27 Neliam screw lampholder in steel with copper chrome finish

DIY-067 E27 acier chrome cuivre

€9.90

Trendy copper chrome lampholder for E27 incandescent or low-energy lamps,

E27 screw lampholder in steel with brass chrome finish

Lampholder and base

E27 Neliam screw lampholder in steel with gold chrome finish

DIY-067 E27 acier chrome Or

€9.90

Chrome-plated gold lampholder in a resolutely modern style for use with E27 incandescent or low-energy bases,

E27 screw lampholder in steel with grey chrome finish

Lampholder and base

E27 Neliam screw lampholder in steel with grey chrome finish

DIY-067 E27 acier chrome gris

€9.90

Grey chrome lampholder in a resolutely modern style for E27 incandescent or low-energy lamps,

Lampholder and base

E27 antique grey vintage style screw lampholder

DIY-067 E27 gris antique

€6.90

Vintage-style lampholder in antique grey for E27 incandescent or low-energy lamp,

Lampholder and base

E27 black bronze vintage style screw lampholder

DIY-067 E27 bronze noir

€6.90

Vintage-style lampholder in black bronze steel for E27 incandescent or low-energy lamps,

E27 vintage-style brass screw lampholder

Lampholder and base

E27 screw lampholder with brass finish, vintage style

DIY-067 E27 Laiton

€6.90

Brass-finish vintage-style lampholder for E27 incandescent or low-energy lamps,

Lampholder and base

E27 brown oxide bronze vintage-style screw lampholder

DIY-067 E27 bronze oxyde brun

€6.90

Vintage-style lampholder in brown oxide bronze finish for E27 incandescent or low-energy lamp,

Lighting and lighting design

E27 black bronze vintage style screw lampholder with chain switch

DIY-067 E27 bronze noir chain

€6.95

Black bronze vintage-style lampholder with chain switch for E27 incandescent or low-energy lamps,

Lampholder and base

E27 screw lampholder bronze oxide brown vintage style rotary knob

DIY-067 E27 bronze oxy brun bout

€6.95

Vintage-style lampholder in brown oxide bronze finish with rotary knob for E27 incandescent or low-energy lamps,

Lampholder and base

E27 antique grey vintage style screw lampholder with chain switch

DIY-067 E27 gris antique chain

€6.95

Vintage-style lampholder in antique grey with rotary knob for E27 incandescent or low-energy lamps,

Lampholder and base

E27 brown oxide bronze vintage style screw lampholder with chain switch

DIY-067 E27 bronze oxyde brun ch

€6.95

Vintage-style lampholder in brown oxide bronze with chain switch for E27 incandescent or low-energy lamps,

Lampholder and base

E27 brass vintage-style screw lampholder with chain switch

DIY-067 E27 Laiton chain

€6.95

Vintage-style brass lampholder with chain switch for E27 incandescent or low-energy lamps,

Lampholder and base

E27 screw lampholder antique grey vintage style rotary knob

DIY-067 E27 gis antique bouton R

€6.95

Vintage-style lampholder in antique grey with rotary knob for E27 incandescent or low-energy lamps,

E27 screw lampholder bronze black vintage style rotary knob

Out-of-Stock

Lighting and lighting design

E27 screw lampholder bronze black vintage style rotary knob

DIY-067 E27 bronze noirbouton R

€6.95

Vintage-style lampholder in black bronze finish with rotary knob for E27 incandescent or low-energy lamps,

View

E27 screw lampholder brass vintage style rotary knob

Lighting and lighting design

E27 screw lampholder with brass finish, vintage style rotary knob

DIY-067 E27 noirbouton R

€6.95

Vintage-style brass lampholder with black plastic rotary knob for E27 incandescent or low-energy lamps,

M10 threaded tube 100cm long an accessory for bulb sockets

Tube and threaded accessory

M10 threaded tube in galvanised steel, 100cm long, an accessory for luminaire

DIY-066-M10X1.0-100cm

€11.00

Hollow threaded rod sold individually in M10 standard with 1mm fine pitch for fixing bulb sockets.Choose the length you need from the variations, available in this advert in 1 metre lengths.

Threaded tube M10 length from 71cm to 80cm an accessory for bulb sockets

Product available with different options

Tube and threaded accessory

M10 threaded tube in galvanised steel, length from 71cm to 80cm an accessory for luminaire

DIY-065

€7.06

Hollow threaded rod sold individually in M10 standard with 1mm fine pitch for fixing bulb sockets.Choose the length you need from our range of models, available in this advert in lengths from 71 cm to 80 cm.

View

Threaded tube M10 length from 61cm to 70cm an accessory for bulb sockets

Product available with different options

Tube and threaded accessory

M10 threaded tube in galvanised steel, length from 61cm to 70cm, an accessory for...

DIY-064

€6.06

View

Threaded tube M10 length from 51cm to 60cm an accessory for bulb sockets

Tube and threaded accessory

M10 threaded tube in galvanised steel length from 51cm to 60cm an accessory for luminaire

DIY-063

€4.86

Threaded tube M10 length from 41cm to 50cm an accessory for bulb sockets

Tube and threaded accessory

M10 threaded tube in galvanised steel, length from 41cm to 50cm an accessory for luminaire

DIY-062

€3.90

Hollow threaded rod sold individually in M10 standard with 1mm fine pitch for fixing bulb sockets.Choose the length you need from the range available in this advert in lengths from 41 cm to 50 cm.

Threaded tube M10 length from 21 to 30 cm an accessory for bulb sockets

Tube and threaded accessory

Threaded tube M10 in galvanised steel length from 21 to 30 cm an accessory for luminaire

DIY-060

€1.90

Hollow threaded rod sold individually in M10 standard with 1mm fine pitch for fixing bulb sockets. Choose the length you need from our range, available in this advert in lengths from 21 to 30cm.

M10 threaded tube, length from 11 to 20 cm an accessory for bulb sockets

Tube and threaded accessory

M10 threaded tube in galvanised steel, length from 11 to 20 cm an accessory for luminaire

DIY-059

€1.00

Hollow threaded rod sold individually in M10 standard with 1mm fine pitch for fixing bulb sockets. Choose the length you need from our range, available in this advert in lengths from 11 to 20cm.

Zinc-plated serrated washer for M10 threaded tube

Nut and washer

Zinc-plated serrated fan washer for M10 threaded tube

Rondelle dentelée M10

€0.15

This fan lock washer is particularly suitable for assembling luminaires fitted with a socket on a hollow stem.

Tube and threaded accessory

Threaded insert for M10 tube, 1mm pitch

Insert fileté-M10

€0.42

Self-tapping sockets ideal for assembling light fittings and chandeliers mounted on M10 hollow rods.

Cable clamp, cable fastener, screws, interlock button

White plastic electrical cable clamp for lamp socket or ceiling rose with M10 thread.

€1.00

White plastic electrical cable clamp for light bulb socket or ceiling rose with M10 thread.

Cable clamp, cable fastener, screws, interlock button

Black plastic electrical cable clamp for lamp socket or ceiling rose with M10 thread.

€1.00

Black plastic electrical cable clamp for light bulb socket or ceiling rose with M10 thread.

Cable clamp, cable fastener, screws, interlock button

Transparent plastic electrical cable clamp for lamp socket or ceiling rose with M10 thread

€1.00

Transparent plastic electrical cable clamp for light bulb socket or ceiling rose with M10 thread.

Lampholder and base

E27 brass screw lampholder vintage style brass rotary knob

DIY-067233002

€16.90

Vintage-style brass lampholder with brass rotary knob for E27 incandescent or low-energy lamp,

Threaded tube M10 length from 1 to 10 cm an accessory for bulb sockets

Tube and threaded accessory

Threaded tube M10 in galvanised steel length from 1 to 10 cm an accessory for luminaire

DIY-058-M10

€0.09

Hollow threaded rod sold individually in M10 standard with 1mm fine pitch for fixing bulb sockets. Choose the length you need from the variations available in this advert in lengths from 1cm to 10cm.

Threaded tube M10 length from 31cm to 40cm an accessory for bulb sockets

Tube and threaded accessory

M10 threaded tube in galvanised steel, length from 31cm to 40cm an accessory for luminaire

DIY-061

€2.90

Hollow threaded rod in galvanised steel sold individually as standard M10 with 1mm fine pitch. Choose the length you need from the range of 31 cm to 40 cm.

Lampholder and base

White plastic socket with double clamping rings for E14 base bulb

EFDSC001-P-E14 double bag-blanc

€1.96

E14 lampholder in self-extinguishing white plastic with double screw ring for incandescent, halogen or low-energy lamps,

Lampholder and base

White plastic socket with double clamping rings for E27 base bulb

EFDSC002-P-E27 double bag-blanc

€2.96

E27 lampholder in self-extinguishing white plastic with double screw ring for incandescent, halogen or low-energy lamps,

Flat electric cable

5-core flat cable for RGB W LED strip

EFACSTP129-1m

€1.90

Flat electrical cable with five conductors: red, green, blue, black and white with 0.3mm² wires, length 1m

Sockets, multipliers, risers, adapter sockets

M10 threaded D11 socket with G4 bakelite cap, cable length 20cm

Manchon-d11+culot-G4

€3.80

This small G4 lamp holder makes it easy to install small light sources simply by going through a partition, on shelves or on kitchen units to light a work surface.

Sockets, multipliers, risers, adapter sockets

G4 lamp holder on bulkhead with removable head

support lampe G4 court

€3.26

This small G4 lamp holder makes it easy to install small light sources simply by going through a partition, on shelves or on kitchen units to light a work surface.

Sockets, multipliers, risers, adapter sockets

Mini G4 bakelite base with cables for LED or halogen bulbs

Mini culot-G4-30CM

€0.80

A mini G4 bakelite base on a bare wire for G4 halogen or G4 LED bulbs.

Flat electric cable

Flat electric wire red black 2 wires 0.75mm² length 1m

EFACSTP035-0,75-1m

€1.45

Flat electric wire red black 2 wires 0.75mm² length 1m

Flat electrical wire red black 2 wires 0.3mm² length 1m

Flat electric cable

Flat electric wire red black 2 wires 0.3mm² length 1 meter

EFACSTP035-0,3-1m

€1.00

Flat electric wire red black 2 wires 0.3mm² length 1m

LED flame bulbs

2.5 watt LED flame bulb Filament LED spectra color E14

FlamFil-2w

€4.90

Filament bulbs are back, and now we're bringing you a new range of Edison-style LED bulbs with a retro look, to delight lovers of beautiful traditional lights!

Chain, cable, rope, ball and pendant

Chrome-plated stainless steel chain 1 m long

EFCH-091

€6.90

One-metre chain in closed elongated mesh for hanging or securing small objects.

Gold-plated ball chain with handle, length 1 m

Out-of-Stock

Lighting and lighting design

Gold-plated ball chain with varnished pine pendant - length 1 m

EFCH-077

€4.00

A two-millimetre-diameter gold-plated ball chain for hanging or securing small objects.

View

Sockets, multipliers, risers, adapter sockets

Compact zinc-plated steel adapter socket E40 to E27

E40-to-E27compact

€2.50

This E40 to E27 adapter socket lets you transfer an E40 base to an E27 base quickly and easily.

Flat electric cable

4-core ribbon cable for RGB LED strip

EFACSTP036-1m

€1.50

Flat electrical cable with four conductors, one red, one green, one blue and one black with 0.3mm² wires 1m long

Mini G4 ceramic base for LED or halogen bulbs

Sockets, multipliers, risers, adapter sockets

Mini G4 ceramic base with cables for LED or halogen bulbs

Mini culot-G4-céramique

€0.85

A mini G4 ceramic base on a bare wire for G4 halogen bulbs or G4 LED bulbs.

Sockets, multipliers, risers, adapter sockets

Adaptor socket - E10 to E14

EF-E10-E14

€1.90

This E10 to E14 adapter socket lets you transfer an E10 base to an E14 base quickly and easily.

Sockets, multipliers, risers, adapter sockets

Adaptor lampholder - E12 to E14 colour white or black

EF-E12-E14

€1.90

This E12 to E14 adapter socket lets you transfer an E12 base to an E14 base quickly and easily.

Sockets, multipliers, risers, adapter sockets

Adapter socket - E14 to MR16

EF-E14-MR16TC

€1.90

Easily convert your E14 socket to an MR16 base in an instant with this adapter socket

Sockets, multipliers, risers, adapter sockets

Adapter socket - E14 to E12

EF-E14-E12

€1.90

Easily convert your E14 socket to an E12 base in an instant with this adapter socket

Sockets, multipliers, risers, adapter sockets

Adapter socket - E14 to G9

EF-E14-G9TC

€2.85

An adapter socket that lets you convert the E14 base of your lights to a G9 base in just a few moments, with no DIY skills required.

Sockets, multipliers, risers, adapter sockets

Adapter socket - E27 to E12

EF-E27-E12

€2.00

Easily convert your E27 socket to an E12 base in an instant with this adapter socket

Sockets, multipliers, risers, adapter sockets

Adapter socket - E27 to G9

EF-E27-G9TC

€3.65

This E27 to G9 adapter socket makes transferring an E27 base to a G9 base quick and easy.

Sockets, multipliers, risers, adapter sockets

Adaptor socket - GU10 to MR16

EF-GU10-MR16

€2.40

GU10 to MR16 adapter socket, enabling you to transfer a GU10 base to an MR16 base quickly and easily.

Ring, hook, ball joint and spring

Spring for flush-mounted spotlight, panel or downlight, length 50mm

EFACSTP068

€0.58

50 mm long spring for all recessed luminaires.

Ring, hook, ball joint and spring

Spring for recessed, panel or downlight spotlight, length 35mm

EFACSTP069

€0.42

35 mm long spring for all recessed luminaires.

Ring, hook, ball joint and spring

Spring for recessed spot, panel or downlight, length 55mm

EFACSTP067

€0.62

55 mm long spring for all recessed luminaires.

Ring, hook, ball joint and spring

Spring for recessed spotlight, panel or downlight, length 45mm

EFACSTP066

€0.52

45 mm long spring for all recessed luminaires.

Flat electric cable

Flat electric cable red black 2 wires 0.5mm² length 1m

EFACSTP035-0,5-1m

€1.10

Flat electric cable red black 2 wires 0.5mm² length 1m

Chain, cable, rope, ball and pendant

304 L Ø 1.5mm stainless steel cable with transparent PVC sheath for LED panels, length 1m

cable-acier-Ø1.5mm

€0.90

A PVC-coated stainless steel cable for suspending LED panels.

Out-of-Stock

G24 / GX24 / G23 / GX23 / 2G11 / 2G7 / 2GX7 bulbs

Adapter socket - E27 to G24

culot-e27-g24

€3.95

Among all these adaptor sockets, you're sure to find the model that will enable you to install your bulb in less than two minutes.

View

G24 / GX24 / G23 / GX23 / 2G11 / 2G7 / 2GX7 bulbs

Adapter socket - G24 to E27

culot-g24-e27

€4.20

An adapter socket that lets you convert the G24 base of your lights to an E27 base in just a few moments, with no DIY skills required.

Sockets, multipliers, risers, adapter sockets

Adaptor lampholder - GU10 to E14

GU10-to-E14

€2.00

Easily convert your GU10 socket to an E14 base in an instant with this adapter socket

Sockets, multipliers, risers, adapter sockets

Adaptor lampholder - GU10 to E27

GU10-to-E27

€2.00

This GU10 to E27 adapter socket makes transferring a GU10 base to an E27 base quick and easy.

Sockets, multipliers, risers, adapter sockets

Adaptor lampholder - E40 to E27

E40-to-E27

€2.50

This E40 to E27 adapter socket lets you transfer an E40 base to an E27 base quickly and easily.

Sockets, multipliers, risers, adapter sockets

Adapter socket - E27 to MR16

E27-to-MR16

€2.95

An adapter socket that lets you convert the E27 base of your lights to MR16 base in just a few moments, with no DIY skills required.

Sockets, multipliers, risers, adapter sockets

Adapter socket - E27 to E40

E27-to-E40

€4.20

This E27 to E40 adapter socket makes transferring an E27 base to an E40 base quick and easy.

Sockets, multipliers, risers, adapter sockets

Adaptor lampholder - E14 to GU10

E14-to-GU10

€2.50

This E14 to GU10 adapter socket makes transferring a B22 base to an E14 base quick and easy.

Sockets, multipliers, risers, adapter sockets

Adapter socket - E14 to E27

E14-to-E27

€2.50

This E14 to E27 adapter socket lets you transfer a B22 base to an E14 base quickly and easily.

Lampholder and base

E27 socket with chain on/off switch colour black

E27-M/A-chain-noir

€5.90

E27 base with chain on/off switch for mounting on 10 mm diameter threaded tube.

Sockets, multipliers, risers, adapter sockets

Adapter socket - E27 to GU10

E27-to-GU10

€2.40

This E27 to GU10 adapter socket makes transferring a B22 base to an E14 base quick and easy.

Adaptor sockets - E27 to B22 base transfer

Sockets, multipliers, risers, adapter sockets

Adapter socket - E27 to B22

E27-to-B22

€2.00

Adaptor socket - transfer from E27 to B22 base Convert your E27 socket to a B22 base in an instant with this adapter socket.

Sockets, multipliers, risers, adapter sockets

Adapter socket - E27 to E14

E27-to-E14

€2.00

Adaptor socket - transfer from E27 to E14 bases. An adapter socket for quickly and easily fitting E14 format bulbs to a luminaire fitted with E27 bases.

Sockets, multipliers, risers, adapter sockets

Adaptor socket - B22 to GU10

B22-to-GU10

€2.50

Adaptor socket - transfer from B22 to GU10 bases. A base that makes it very easy to combine GU10 format bulbs with a luminaire fitted with B22 bases.

Adaptor sockets - transfer from B22 to E27 base

Sockets, multipliers, risers, adapter sockets

Adapter socket - B22 to E27

B22-to-E27

€2.00

Adaptor sockets - transfer from B22 to E27 base. An adapter socket that lets you convert the B22 base of your lights to an E27 base in just a few moments.

Adaptor sockets - transfer from B22 to E14 base

Adapter sleeves

Adapter socket - B22 to E14

B22-to-E14

€2.00

Adaptor sockets - transfer from B22 to E14 base. An adapter socket that lets you convert the B22 base of your lights to an E14 base in just a few moments, with no DIY skills required.

Sockets, multipliers, risers, adapter sockets

Porcelain base for G9 auto grip lamp on bare wire

culot-G9-autogrip

€1.45

Standard G9 porcelain socket for halogen or LED bulbs

Showing 1-1401 of 1401 item(s)